IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v202y2020ics0360544220308744.html
   My bibliography  Save this article

Multi-objective optimal design for integrated palm oil mill complex with consideration of effluent elimination

Author

Listed:
  • Tan, Yue Dian
  • Lim, Jeng Shiun
  • Wan Alwi, Sharifah Rafidah

Abstract

To reduce greenhouse gas (GHG) impact while sustaining palm oil mill (POM) profitability, Malaysia has recognised POME-derived biogas as a renewable energy. Biogas utilisation for on-site fuel replacement and grid electricity contribution is encouraged by government schemes such as Feed-in-tariff (FiT). Nevertheless, adoption rate of biogas facility is still low among Malaysian POMs. An integrated palm-oil based complex (POBC) was proposed for GHG mitigation by integrating POM and refinery processes while addressing sustainability concerns. This study presented a multi-objective optimisation model-based approach to aid POBC planning at maximised economic potential and net energy, while minimising its GHG emission, water footprint (WFP) and land footprint (LFP) for environment protection. Trade-offs between biogas recovery and POME elimination strategies were considered. The developed fuzzy model was applied to case study and analysed under different multi-objective scenarios. In comparison with baseline study, the economic potential of sustainable POBC increase by 6.7% at USD 39.31 × 106 with 88%, 74% and 91% improvements in GHG footprint, WFP and LFP by compromising 76% net energy. Effect of FiT revenue towards POBC synthesis was investigated. Pareto front was generated to verify the fuzzy results and visualise the relationship between objective functions. The optimisation model and optimal results shall provide input to Malaysian POMs on the sustainability benefits of POBC.

Suggested Citation

  • Tan, Yue Dian & Lim, Jeng Shiun & Wan Alwi, Sharifah Rafidah, 2020. "Multi-objective optimal design for integrated palm oil mill complex with consideration of effluent elimination," Energy, Elsevier, vol. 202(C).
    • Handle: RePEc:eee:energy:v:202:y:2020:i:c:s0360544220308744
    DOI: 10.1016/j.energy.2020.117767
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220308744
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.117767?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Loh, S.K. & Nasrin, A.B. & Mohamad Azri, S. & Nurul Adela, B. & Muzzammil, N. & Daryl Jay, T. & Stasha Eleanor, R.A. & Lim, W.S. & Choo, Y.M. & Kaltschmitt, M., 2017. "First Report on Malaysia’s experiences and development in biogas capture and utilization from palm oil mill effluent under the Economic Transformation Programme: Current and future perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 1257-1274.
    2. Purnomo, Herry & Okarda, Beni & Dewayani, Ade Ayu & Ali, Made & Achdiawan, Ramadhani & Kartodihardjo, Hariadi & Pacheco, Pablo & Juniwaty, Kartika S., 2018. "Reducing forest and land fires through good palm oil value chain governance," Forest Policy and Economics, Elsevier, vol. 91(C), pages 94-106.
    3. Chin, May Ji & Poh, Phaik Eong & Tey, Beng Ti & Chan, Eng Seng & Chin, Kit Ling, 2013. "Biogas from palm oil mill effluent (POME): Opportunities and challenges from Malaysia's perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 717-726.
    4. Lim, Jeng Shiun & Abdul Manan, Zainuddin & Hashim, Haslenda & Wan Alwi, Sharifah Rafidah, 2013. "Towards an integrated, resource-efficient rice mill complex," Resources, Conservation & Recycling, Elsevier, vol. 75(C), pages 41-51.
    5. Theo, Wai Lip & Lim, Jeng Shiun & Ho, Wai Shin & Hashim, Haslenda & Lee, Chew Tin & Muis, Zarina Abdul, 2017. "Optimisation of oil palm biomass and palm oil mill effluent (POME) utilisation pathway for palm oil mill cluster with consideration of BioCNG distribution network," Energy, Elsevier, vol. 121(C), pages 865-883.
    6. Chye Ing Lim & Wahidul K. Biswas, 2019. "Sustainability Implications of the Incorporation of a Biogas Trapping System into a Conventional Crude Palm Oil Supply Chain," Sustainability, MDPI, vol. 11(3), pages 1-19, February.
    7. Kelly-Yong, Tau Len & Lee, Keat Teong & Mohamed, Abdul Rahman & Bhatia, Subhash, 2007. "Potential of hydrogen from oil palm biomass as a source of renewable energy worldwide," Energy Policy, Elsevier, vol. 35(11), pages 5692-5701, November.
    8. Foo, Dominic C.Y. & Tan, Raymond R. & Lam, Hon Loong & Abdul Aziz, Mustafa Kamal & Klemeš, Jiří Jaromír, 2013. "Robust models for the synthesis of flexible palm oil-based regional bioenergy supply chain," Energy, Elsevier, vol. 55(C), pages 68-73.
    9. Choong, Yee Yaw & Chou, Kian Weng & Norli, Ismail, 2018. "Strategies for improving biogas production of palm oil mill effluent (POME) anaerobic digestion: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2993-3006.
    10. Nurhayati Abdullah & Fauziah Sulaiman, 2013. "The Oil Palm Wastes in Malaysia," Chapters, in: Miodrag Darko Matovic (ed.), Biomass Now - Sustainable Growth and Use, IntechOpen.
    11. Tan, Yue Dian & Lim, Jeng Shiun, 2019. "Feasibility of palm oil mill effluent elimination towards sustainable Malaysian palm oil industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 507-522.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tan, Yue Dian & Lim, Jeng Shiun & Andiappan, Viknesh & Wan Alwi, Sharifah Rafidah, 2022. "Systematic optimisation framework for a sustainable multi-owner palm oil-based complex," Energy, Elsevier, vol. 261(PA).
    2. Seferlis, Panos & Varbanov, Petar Sabev & Papadopoulos, Athanasios I. & Chin, Hon Huin & Klemeš, Jiří Jaromír, 2021. "Sustainable design, integration, and operation for energy high-performance process systems," Energy, Elsevier, vol. 224(C).
    3. Jian Wong, Khai & Keat Ooi, Jun & Sin Woon, Kok & Ren Mong, Guo & Shadman, Saleh & Lam Ng, Wai, 2022. "A country-level Pareto-optimal palm waste utilisation network for economic and environmental sustainability," Energy, Elsevier, vol. 260(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tan, Yue Dian & Lim, Jeng Shiun, 2019. "Feasibility of palm oil mill effluent elimination towards sustainable Malaysian palm oil industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 507-522.
    2. Theo, Wai Lip & Lim, Jeng Shiun & Ho, Wai Shin & Hashim, Haslenda & Lee, Chew Tin & Muis, Zarina Abdul, 2017. "Optimisation of oil palm biomass and palm oil mill effluent (POME) utilisation pathway for palm oil mill cluster with consideration of BioCNG distribution network," Energy, Elsevier, vol. 121(C), pages 865-883.
    3. Lee, Ming Kwee & Hashim, Haslenda & Lim, Jeng Shiun & Taib, Mohd Rozainee, 2019. "Spatial planning and optimisation for virtual distribution of BioCNG derived from palm oil mill effluent to meet industrial energy demand," Renewable Energy, Elsevier, vol. 141(C), pages 526-540.
    4. Zailan, Roziah & Lim, Jeng Shiun & Manan, Zainuddin Abdul & Alwi, Sharifah Rafidah Wan & Mohammadi-ivatloo, Behnam & Jamaluddin, Khairulnadzmi, 2021. "Malaysia scenario of biomass supply chain-cogeneration system and optimization modeling development: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    5. Tan, Yue Dian & Lim, Jeng Shiun & Andiappan, Viknesh & Wan Alwi, Sharifah Rafidah, 2022. "Systematic optimisation framework for a sustainable multi-owner palm oil-based complex," Energy, Elsevier, vol. 261(PA).
    6. Fumi Harahap & Sylvain Leduc & Sennai Mesfun & Dilip Khatiwada & Florian Kraxner & Semida Silveira, 2019. "Opportunities to Optimize the Palm Oil Supply Chain in Sumatra, Indonesia," Energies, MDPI, vol. 12(3), pages 1-24, January.
    7. Phuang, Zhen Xin & Woon, Kok Sin & Wong, Khai Jian & Liew, Peng Yen & Hanafiah, Marlia Mohd, 2021. "Unlocking the environmental hotspots of palm biodiesel upstream production in Malaysia via life cycle assessment," Energy, Elsevier, vol. 232(C).
    8. Zain, Munirah Md & Mohamed, Abdul Rahman, 2018. "An overview on conversion technologies to produce value added products from CH4 and CO2 as major biogas constituents," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 56-63.
    9. Kumaran, Palanisamy & Hephzibah, David & Sivasankari, Ranganathan & Saifuddin, Normanbay & Shamsuddin, Abd. Halim, 2016. "A review on industrial scale anaerobic digestion systems deployment in Malaysia: Opportunities and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 929-940.
    10. Gourich, Wail & Chan, Eng-Seng & Ng, Wei Zhe & Obon, Aaron Anthony & Maran, Kireshwen & Ong, Yi Hui & Lee, Chin Loong & Tan, Jully & Song, Cher Pin, 2022. "Life cycle benefits of enzymatic biodiesel co-produced in palm oil mills from sludge palm oil as renewable fuel for rural electrification," Applied Energy, Elsevier, vol. 325(C).
    11. How, Bing Shen & Ngan, Sue Lin & Hong, Boon Hooi & Lam, Hon Loong & Ng, Wendy Pei Qin & Yusup, Suzana & Ghani, Wan Azlina Wan Abd Karim & Kansha, Yasuki & Chan, Yi Herng & Cheah, Kin Wai & Shahbaz, Mu, 2019. "An outlook of Malaysian biomass industry commercialisation: Perspectives and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    12. Jian Wong, Khai & Keat Ooi, Jun & Sin Woon, Kok & Ren Mong, Guo & Shadman, Saleh & Lam Ng, Wai, 2022. "A country-level Pareto-optimal palm waste utilisation network for economic and environmental sustainability," Energy, Elsevier, vol. 260(C).
    13. A Aziz, Md Maniruzzaman & Kassim, Khairul Anuar & ElSergany, Moetaz & Anuar, Syed & Jorat, M. Ehsan & Yaacob, H. & Ahsan, Amimul & Imteaz, Monzur A. & Arifuzzaman,, 2020. "Recent advances on palm oil mill effluent (POME) pretreatment and anaerobic reactor for sustainable biogas production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    14. Garcia-Nunez, Jesus Alberto & Ramirez-Contreras, Nidia Elizabeth & Rodriguez, Deisy Tatiana & Silva-Lora, Electo & Frear, Craig Stuart & Stockle, Claudio & Garcia-Perez, Manuel, 2016. "Evolution of palm oil mills into bio-refineries: Literature review on current and potential uses of residual biomass and effluents," Resources, Conservation & Recycling, Elsevier, vol. 110(C), pages 99-114.
    15. Choong, Yee Yaw & Chou, Kian Weng & Norli, Ismail, 2018. "Strategies for improving biogas production of palm oil mill effluent (POME) anaerobic digestion: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2993-3006.
    16. Annamari Enström & Timo Haatainen & Adrian Suharto & Michael Giebels & Kuan Yee Lee, 2019. "Introducing a new GHG emission calculation approach for alternative methane reduction measures in the wastewater treatment of a palm oil mill," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 21(6), pages 3065-3076, December.
    17. Ahyahudin Sodri & Fentinur Evida Septriana, 2022. "Biogas Power Generation from Palm Oil Mill Effluent (POME): Techno-Economic and Environmental Impact Evaluation," Energies, MDPI, vol. 15(19), pages 1-16, October.
    18. Akhbari, Azam & Ibrahim, Shaliza & Ahmad, Muhammad Shakeel, 2023. "Feasibility of semi-pilot scale up-flow anaerobic sludge blanket fixed-film reactor for fermentative bio-hydrogen production from palm oil mill effluent," Renewable Energy, Elsevier, vol. 212(C), pages 612-620.
    19. Sharvini, S.R. & Noor, Z.Z. & Stringer, L.C. & Afionis, S. & Chong, C.S., 2022. "Energy generation from palm oil mill effluent: A life cycle cost-benefit analysis and policy insights," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    20. Yek, Peter Nai Yuh & Cheng, Yoke Wang & Liew, Rock Keey & Wan Mahari, Wan Adibah & Ong, Hwai Chyuan & Chen, Wei-Hsin & Peng, Wanxi & Park, Young-Kwon & Sonne, Christian & Kong, Sieng Huat & Tabatabaei, 2021. "Progress in the torrefaction technology for upgrading oil palm wastes to energy-dense biochar: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:202:y:2020:i:c:s0360544220308744. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.