IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v162y2018icp380-392.html
   My bibliography  Save this article

Ejector integration for the cost effective design of the Selexol™ process

Author

Listed:
  • Ashrafi, Omid
  • Bashiri, Hamed
  • Esmaeili, Amin
  • Sapoundjiev, Hristo
  • Navarri, Philippe

Abstract

This work introduces a novel approach to reduce the energy demand as well as capital and operating costs in a widely used gas purification process by optimal integration of ejector technology. Three scenarios for ejector integration have been identified into a dual-stage Selexol™ process configuration for H2S and CO2 removal from syngas. The clean syngas met the requirement to be used in an integrated gasification combined cycle. The intention was to unload or eliminate compressors used in the conventional design, and to reduce the capital and operating costs. Aspen HYSYS® is used to develop a detailed simulation model of the Selexol™ process and to assess the impacts of the proposed design configurations from an energy and economic perspective. A predictive design model is also used to evaluate the operating conditions of the proposed ejectors. Among the scenarios investigated, it is found that ejector integration is attractive only if one or some compressors can be eliminated. This work shows that an optimally integrated ejector in the CO2 recovery and compression section of the Selexol™ process can reduce the capital costs by up to 28%, while reducing the operating costs by up to 6%.

Suggested Citation

  • Ashrafi, Omid & Bashiri, Hamed & Esmaeili, Amin & Sapoundjiev, Hristo & Navarri, Philippe, 2018. "Ejector integration for the cost effective design of the Selexol™ process," Energy, Elsevier, vol. 162(C), pages 380-392.
  • Handle: RePEc:eee:energy:v:162:y:2018:i:c:p:380-392
    DOI: 10.1016/j.energy.2018.08.053
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218315731
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2018.08.053?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mondal, Monoj Kumar & Balsora, Hemant Kumar & Varshney, Prachi, 2012. "Progress and trends in CO2 capture/separation technologies: A review," Energy, Elsevier, vol. 46(1), pages 431-441.
    2. Urech, Jeremy & Tock, Laurence & Harkin, Trent & Hoadley, Andrew & Maréchal, François, 2014. "An assessment of different solvent-based capture technologies within an IGCC–CCS power plant," Energy, Elsevier, vol. 64(C), pages 268-276.
    3. Besagni, Giorgio & Mereu, Riccardo & Inzoli, Fabio, 2016. "Ejector refrigeration: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 373-407.
    4. Park, Sung Ho & Lee, Seung Jong & Lee, Jin Wook & Chun, Sung Nam & Lee, Jung Bin, 2015. "The quantitative evaluation of two-stage pre-combustion CO2 capture processes using the physical solvents with various design parameters," Energy, Elsevier, vol. 81(C), pages 47-55.
    5. Ashrafi, Omid & Navarri, Philippe & Hughes, Robin & Lu, Dennis, 2016. "Heat recovery optimization in a steam-assisted gravity drainage (SAGD) plant," Energy, Elsevier, vol. 111(C), pages 981-990.
    6. Reddick, Christopher & Sorin, Mikhail & Sapoundjiev, Hristo & Aidoun, Zine, 2016. "Carbon capture simulation using ejectors for waste heat upgrading," Energy, Elsevier, vol. 100(C), pages 251-261.
    7. Khaghani, Anna & Date, Abhijit & Akbarzadeh, Aliakbar, 2013. "Sustainable removal of non-condensable gases from geothermal waters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 204-214.
    8. Zhang, Kefang & Liu, Zhongliang & Wang, Yuanya & Li, Yanxia & Li, Qingfang & Zhang, Jian & Liu, Haili, 2014. "Flash evaporation and thermal vapor compression aided energy saving CO2 capture systems in coal-fired power plant," Energy, Elsevier, vol. 66(C), pages 556-568.
    9. Gibbins, Jon & Chalmers, Hannah, 2008. "Carbon capture and storage," Energy Policy, Elsevier, vol. 36(12), pages 4317-4322, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lozano, E.M. & Pedersen, T.H. & Rosendahl, L.A., 2020. "Integration of hydrothermal liquefaction and carbon capture and storage for the production of advanced liquid biofuels with negative CO2 emissions," Applied Energy, Elsevier, vol. 279(C).
    2. Besagni, Giorgio, 2019. "Ejectors on the cutting edge: The past, the present and the perspective," Energy, Elsevier, vol. 170(C), pages 998-1003.
    3. Zang, Guiyan & Zhang, Jianan & Jia, Junxi & Lora, Electo Silva & Ratner, Albert, 2020. "Life cycle assessment of power-generation systems based on biomass integrated gasification combined cycles," Renewable Energy, Elsevier, vol. 149(C), pages 336-346.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ren, Siyue & Feng, Xiao & Wang, Yufei, 2021. "Emergy evaluation of the integrated gasification combined cycle power generation systems with a carbon capture system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).
    2. Chen, Yaping & Zhu, Zilong & Wu, Jiafeng & Yang, Shifan & Zhang, Baohuai, 2017. "A novel LNG/O2 combustion gas and steam mixture cycle with energy storage and CO2 capture," Energy, Elsevier, vol. 120(C), pages 128-137.
    3. Bobo Zheng & Jiuping Xu, 2014. "Carbon Capture and Storage Development Trends from a Techno-Paradigm Perspective," Energies, MDPI, vol. 7(8), pages 1-30, August.
    4. Li, Hongwei & Zhang, Rongjun & Wang, Tianye & Wu, Yu & Xu, Run & Wang, Qiang & Tang, Zhigang, 2022. "Performance evaluation and environment risk assessment of steel slag enhancement for seawater to capture CO2," Energy, Elsevier, vol. 238(PB).
    5. Poirier, Michel & Giguère, Daniel & Sapoundjiev, Hristo, 2018. "Experimental parametric investigation of vapor ejector for refrigeration applications," Energy, Elsevier, vol. 162(C), pages 1287-1300.
    6. Najmus S. Sifat & Yousef Haseli, 2019. "A Critical Review of CO 2 Capture Technologies and Prospects for Clean Power Generation," Energies, MDPI, vol. 12(21), pages 1-33, October.
    7. Zhu, Zilong & Chen, Yaping & Wu, Jiafeng & Zhang, Shaobo & Zheng, Shuxing, 2019. "A modified Allam cycle without compressors realizing efficient power generation with peak load shifting and CO2 capture," Energy, Elsevier, vol. 174(C), pages 478-487.
    8. Theo, Wai Lip & Lim, Jeng Shiun & Hashim, Haslenda & Mustaffa, Azizul Azri & Ho, Wai Shin, 2016. "Review of pre-combustion capture and ionic liquid in carbon capture and storage," Applied Energy, Elsevier, vol. 183(C), pages 1633-1663.
    9. Li, Hongwei & Tang, Zhigang & Xing, Xiao & Guo, Dong & Cui, Longpeng & Mao, Xian-zhong, 2018. "Study of CO2 capture by seawater and its reinforcement," Energy, Elsevier, vol. 164(C), pages 1135-1144.
    10. Setiawan, Andri D. & Cuppen, Eefje, 2013. "Stakeholder perspectives on carbon capture and storage in Indonesia," Energy Policy, Elsevier, vol. 61(C), pages 1188-1199.
    11. Chen, Guangming & Ierin, Volodymyr & Volovyk, Oleksii & Shestopalov, Kostyantyn, 2019. "An improved cascade mechanical compression–ejector cooling cycle," Energy, Elsevier, vol. 170(C), pages 459-470.
    12. Narukulla, Ramesh & Chaturvedi, Krishna Raghav & Ojha, Umaprasana & Sharma, Tushar, 2022. "Carbon dioxide capturing evaluation of polyacryloyl hydrazide solutions via rheological analysis for carbon utilization applications," Energy, Elsevier, vol. 241(C).
    13. Moioli, Stefania & Giuffrida, Antonio & Romano, Matteo C. & Pellegrini, Laura A. & Lozza, Giovanni, 2016. "Assessment of MDEA absorption process for sequential H2S removal and CO2 capture in air-blown IGCC plants," Applied Energy, Elsevier, vol. 183(C), pages 1452-1470.
    14. Barelli, L. & Ottaviano, A., 2014. "Solid oxide fuel cell technology coupled with methane dry reforming: A viable option for high efficiency plant with reduced CO2 emissions," Energy, Elsevier, vol. 71(C), pages 118-129.
    15. Bi, Rongshan & Chen, Chen & Li, Jiansong & Tan, Xinshun & Xiang, Shuguang, 2018. "Research on the CFD numerical simulation of flash boiling atomization," Energy, Elsevier, vol. 165(PA), pages 768-781.
    16. Ramesh, A.S. & Sekhar, S. Joseph, 2018. "Experimental and numerical investigations on the effect of suction chamber angle and nozzle exit position of a steam-jet ejector," Energy, Elsevier, vol. 164(C), pages 1097-1113.
    17. Gu, Zhenhua & Zhang, Ling & Lu, Chunqiang & Qing, Shan & Li, Kongzhai, 2020. "Enhanced performance of copper ore oxygen carrier by red mud modification for chemical looping combustion," Applied Energy, Elsevier, vol. 277(C).
    18. Kim, Soyoung & Choi, Sung-Deuk & Seo, Yongwon, 2017. "CO2 capture from flue gas using clathrate formation in the presence of thermodynamic promoters," Energy, Elsevier, vol. 118(C), pages 950-956.
    19. Han, Qingyang & Liu, Changchao & Xue, Haoyuan & Zhang, Hailun & Sun, Wenhui & Sun, Wenxu & Jia, Lei, 2023. "Working condition expansion and performance optimization of two-stage ejector based on optimal switching strategy," Energy, Elsevier, vol. 282(C).
    20. Christian Leßmann & Arne Steinkraus, 2016. "Kurz zum Klima: »Carbon Capture and Storage« – was kostet die Emissionsvermeidung?," ifo Schnelldienst, ifo Institute - Leibniz Institute for Economic Research at the University of Munich, vol. 69(05), pages 51-54, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:162:y:2018:i:c:p:380-392. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.