IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v148y2018icp1103-1115.html
   My bibliography  Save this article

A comparative analysis on the uniformity enhancement methods of solar thermal drying

Author

Listed:
  • Husham Abdulmalek, Shaymaa
  • Khalaji Assadi, Morteza
  • Al-Kayiem, Hussain H.
  • Gitan, Ali Ahmed

Abstract

The uniformity of solar drying process and the quality of the product are inter-related parameters. Drying uniformity is influenced by the significant process air properties which are temperature, humidity and velocity. Accordingly, solar drying uniformity may be improved by integration with dehumidification system and/or optimizing the dryer design. These concepts were reviewed extensively in this paper by brush up the solar thermal hybrid dryers, the performance of solar assisted desiccant systems for dehumidification of drying air, the effect of geometrical parameters on drying performance, and the drying performance of different products. In the context of desiccant systems, the performance of drying is influenced by desiccant material, dehumidifier design and regeneration technique used. While, the issue of solar dryer design is related to drying chamber geometrical parameters, considering multiple drying chambers, and modeling and optimization of dryer design. Coming out with this comprehensive review may motivate to enhance the quality of product and drying performance in terms of cost and time.

Suggested Citation

  • Husham Abdulmalek, Shaymaa & Khalaji Assadi, Morteza & Al-Kayiem, Hussain H. & Gitan, Ali Ahmed, 2018. "A comparative analysis on the uniformity enhancement methods of solar thermal drying," Energy, Elsevier, vol. 148(C), pages 1103-1115.
    • Handle: RePEc:eee:energy:v:148:y:2018:i:c:p:1103-1115
    DOI: 10.1016/j.energy.2018.01.060
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218300719
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.01.060?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Alosaimy, A.S. & Hamed, Ahmed M., 2011. "Theoretical and experimental investigation on the application of solar water heater coupled with air humidifier for regeneration of liquid desiccant," Energy, Elsevier, vol. 36(7), pages 3992-4001.
    2. Shanmugam, V. & Natarajan, E., 2006. "Experimental investigation of forced convection and desiccant integrated solar dryer," Renewable Energy, Elsevier, vol. 31(8), pages 1239-1251.
    3. Sonthikun, Sonthawi & Chairat, Phaochinnawat & Fardsin, Kitti & Kirirat, Pairoj & Kumar, Anil & Tekasakul, Perapong, 2016. "Computational fluid dynamic analysis of innovative design of solar-biomass hybrid dryer: An experimental validation," Renewable Energy, Elsevier, vol. 92(C), pages 185-191.
    4. Rady, M.A. & Huzayyin, A.S. & Arquis, E. & Monneyron, P. & Lebot, C. & Palomo, E., 2009. "Study of heat and mass transfer in a dehumidifying desiccant bed with macro-encapsulated phase change materials," Renewable Energy, Elsevier, vol. 34(3), pages 718-726.
    5. Fudholi, Ahmad & Sopian, Kamaruzzaman & Alghoul, M.A. & Ruslan, Mohd Hafidz & Othman, Mohd Yusof, 2015. "Performances and improvement potential of solar drying system for palm oil fronds," Renewable Energy, Elsevier, vol. 78(C), pages 561-565.
    6. Techajunta, S & Chirarattananon, S & Exell, R.H.B, 1999. "Experiments in a solar simulator on solid desiccant regeneration and air dehumidification for air conditioning in a tropical humid climate," Renewable Energy, Elsevier, vol. 17(4), pages 549-568.
    7. Condorı́, M. & Saravia, L., 2003. "Analytical model for the performance of the tunnel-type greenhouse drier," Renewable Energy, Elsevier, vol. 28(3), pages 467-485.
    8. Ali Mandegari, M. & Pahlavanzadeh, H., 2009. "Introduction of a new definition for effectiveness of desiccant wheels," Energy, Elsevier, vol. 34(6), pages 797-803.
    9. Yin, Yonggao & Zheng, Baojun & Yang, Can & Zhang, Xiaosong, 2015. "A proposed compressed air drying method using pressurized liquid desiccant and experimental verification," Applied Energy, Elsevier, vol. 141(C), pages 80-89.
    10. Rafique, M. Mujahid & Gandhidasan, P. & Bahaidarah, Haitham M.S., 2016. "Liquid desiccant materials and dehumidifiers – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 179-195.
    11. Zhang, Li-Zhi & Fu, Huang-Xi & Yang, Qi-Rong & Xu, Jian-Chang, 2014. "Performance comparisons of honeycomb-type adsorbent beds (wheels) for air dehumidification with various desiccant wall materials," Energy, Elsevier, vol. 65(C), pages 430-440.
    12. Sharma, Atul & Chen, C.R. & Vu Lan, Nguyen, 2009. "Solar-energy drying systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(6-7), pages 1185-1210, August.
    13. Nabnean, S. & Janjai, S. & Thepa, S. & Sudaprasert, K. & Songprakorp, R. & Bala, B.K., 2016. "Experimental performance of a new design of solar dryer for drying osmotically dehydrated cherry tomatoes," Renewable Energy, Elsevier, vol. 94(C), pages 147-156.
    14. Sarsilmaz, C. & Yildiz, C. & Pehlivan, D., 2000. "Drying of apricots in a rotary column cylindrical dryer (RCCD) supported with solar energy," Renewable Energy, Elsevier, vol. 21(2), pages 117-127.
    15. Koyuncu, Turhan, 2006. "An Investigation on the performance Improvement of greenhouse-type agricultural dryers," Renewable Energy, Elsevier, vol. 31(7), pages 1055-1071.
    16. Pramuang, Surajitr & Exell, R.H.B., 2007. "The regeneration of silica gel desiccant by air from a solar heater with a compound parabolic concentrator," Renewable Energy, Elsevier, vol. 32(1), pages 173-182.
    17. Misha, S. & Mat, S. & Ruslan, M.H. & Sopian, K., 2012. "Review of solid/liquid desiccant in the drying applications and its regeneration methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 4686-4707.
    18. Beccali, Marco & Finocchiaro, Pietro & Nocke, Bettina, 2012. "Energy performance evaluation of a demo solar desiccant cooling system with heat recovery for the regeneration of the adsorption material," Renewable Energy, Elsevier, vol. 44(C), pages 40-52.
    19. Garg, H.P. & Kumar, Rakesh, 1998. "Studies on semi-cylindrical solar tunnel dryers: estimation of solar irradiance," Renewable Energy, Elsevier, vol. 13(3), pages 393-400.
    20. Prasad, Jaishree & Vijay, V.K., 2005. "Experimental studies on drying of Zingiber officinale, Curcuma longa l. and Tinospora cordifolia in solar-biomass hybrid drier," Renewable Energy, Elsevier, vol. 30(14), pages 2097-2109.
    21. Afriyie, J.K. & Nazha, M.A.A. & Rajakaruna, H. & Forson, F.K., 2009. "Experimental investigations of a chimney-dependent solar crop dryer," Renewable Energy, Elsevier, vol. 34(1), pages 217-222.
    22. Singh, Sukhmeet & Singh, Parm Pal & Dhaliwal, S.S, 2004. "Multi-shelf portable solar dryer," Renewable Energy, Elsevier, vol. 29(5), pages 753-765.
    23. Hallak, H. & Hillal, J. & Hilal, F. & Rahhal, R., 1996. "The staircase solar dryer: Design and characteristics," Renewable Energy, Elsevier, vol. 7(2), pages 177-183.
    24. Sultan, Muhammad & El-Sharkawy, Ibrahim I. & Miyazaki, Takahiko & Saha, Bidyut Baran & Koyama, Shigeru, 2015. "An overview of solid desiccant dehumidification and air conditioning systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 46(C), pages 16-29.
    25. Angrisani, Giovanni & Minichiello, Francesco & Roselli, Carlo & Sasso, Maurizio, 2012. "Experimental analysis on the dehumidification and thermal performance of a desiccant wheel," Applied Energy, Elsevier, vol. 92(C), pages 563-572.
    26. Condorı́, M & Echazú, R & Saravia, L, 2001. "Solar drying of sweet pepper and garlic using the tunnel greenhouse drier," Renewable Energy, Elsevier, vol. 22(4), pages 447-460.
    27. Angrisani, Giovanni & Capozzoli, Alfonso & Minichiello, Francesco & Roselli, Carlo & Sasso, Maurizio, 2011. "Desiccant wheel regenerated by thermal energy from a microcogenerator: Experimental assessment of the performances," Applied Energy, Elsevier, vol. 88(4), pages 1354-1365, April.
    28. McDoom, I.A. & Ramsaroop, R. & Saunders, R. & Kai, A.Tang, 1999. "Optimization of solar crop drying," Renewable Energy, Elsevier, vol. 16(1), pages 749-752.
    29. Sekyere, C.K.K. & Forson, F.K. & Adam, F.W., 2016. "Experimental investigation of the drying characteristics of a mixed mode natural convection solar crop dryer with back up heater," Renewable Energy, Elsevier, vol. 92(C), pages 532-542.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kong, Decheng & Wang, Yunfeng & Li, Ming & Liang, Jingkang, 2024. "A comprehensive review of hybrid solar dryers integrated with auxiliary energy and units for agricultural products," Energy, Elsevier, vol. 293(C).
    2. Madhankumar, S. & Viswanathan, Karthickeyan, 2022. "Computational and experimental study of a novel corrugated-type absorber plate solar collector with thermal energy storage moisture removal device," Applied Energy, Elsevier, vol. 324(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Murthy, M.V. Ramana, 2009. "A review of new technologies, models and experimental investigations of solar driers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(4), pages 835-844, May.
    2. Rambhad, Kishor S. & Walke, Pramod V. & Tidke, D.J., 2016. "Solid desiccant dehumidification and regeneration methods—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 73-83.
    3. VijayaVenkataRaman, S. & Iniyan, S. & Goic, Ranko, 2012. "A review of solar drying technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2652-2670.
    4. Fudholi, A. & Sopian, K. & Ruslan, M.H. & Alghoul, M.A. & Sulaiman, M.Y., 2010. "Review of solar dryers for agricultural and marine products," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 1-30, January.
    5. Tiwari, Sumit & Tiwari, G.N. & Al-Helal, I.M., 2016. "Development and recent trends in greenhouse dryer: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 1048-1064.
    6. Shamim, Jubair A. & Hsu, Wei-Lun & Paul, Soumyadeep & Yu, Lili & Daiguji, Hirofumi, 2021. "A review of solid desiccant dehumidifiers: Current status and near-term development goals in the context of net zero energy buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    7. Sharma, Atul & Chen, C.R. & Vu Lan, Nguyen, 2009. "Solar-energy drying systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(6-7), pages 1185-1210, August.
    8. Fudholi, Ahmad & Sopian, Kamaruzzaman, 2019. "A review of solar air flat plate collector for drying application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 333-345.
    9. EL-Mesery, Hany S. & EL-Seesy, Ahmed I. & Hu, Zicheng & Li, Yang, 2022. "Recent developments in solar drying technology of food and agricultural products: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    10. Abubakar, S. & Umaru, S. & Kaisan, M.U. & Umar, U.A. & Ashok, B. & Nanthagopal, K., 2018. "Development and performance comparison of mixed-mode solar crop dryers with and without thermal storage," Renewable Energy, Elsevier, vol. 128(PA), pages 285-298.
    11. Prakash, Om & Kumar, Anil, 2014. "Solar greenhouse drying: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 905-910.
    12. Angrisani, Giovanni & Roselli, Carlo & Sasso, Maurizio, 2015. "Experimental assessment of the energy performance of a hybrid desiccant cooling system and comparison with other air-conditioning technologies," Applied Energy, Elsevier, vol. 138(C), pages 533-545.
    13. Yeboah, S.K. & Darkwa, J., 2016. "A critical review of thermal enhancement of packed beds for water vapour adsorption," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 1500-1520.
    14. Angrisani, Giovanni & Roselli, Carlo & Sasso, Maurizio, 2013. "Effect of rotational speed on the performances of a desiccant wheel," Applied Energy, Elsevier, vol. 104(C), pages 268-275.
    15. ELkhadraoui, Aymen & Kooli, Sami & Hamdi, Ilhem & Farhat, Abdelhamid, 2015. "Experimental investigation and economic evaluation of a new mixed-mode solar greenhouse dryer for drying of red pepper and grape," Renewable Energy, Elsevier, vol. 77(C), pages 1-8.
    16. Misha, S. & Mat, S. & Ruslan, M.H. & Sopian, K., 2012. "Review of solid/liquid desiccant in the drying applications and its regeneration methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 4686-4707.
    17. Kang, Hyungmook & Lee, Dae-Young, 2017. "Experimental investigation and introduction of a similarity parameter for characterizing the heat and mass transfer in polymer desiccant wheels," Energy, Elsevier, vol. 120(C), pages 705-717.
    18. Amit Kumar & Avadhesh Yadav, 2017. "Experimental investigation of solar-powered desiccant cooling system by using composite desiccant “CaCl2/jute”," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 19(4), pages 1279-1292, August.
    19. Yahya, M. & Rachman, Arfidian & Hasibuan, R., 2022. "Performance analysis of solar-biomass hybrid heat pump batch-type horizontal fluidized bed dryer using multi-stage heat exchanger for paddy drying," Energy, Elsevier, vol. 254(PB).
    20. Yahya, M. & Fudholi, Ahmad & Sopian, Kamaruzzaman, 2017. "Energy and exergy analyses of solar-assisted fluidized bed drying integrated with biomass furnace," Renewable Energy, Elsevier, vol. 105(C), pages 22-29.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:148:y:2018:i:c:p:1103-1115. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.