IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v126y2017icp34-41.html
   My bibliography  Save this article

Burning velocities of DME(dimethyl ether)-air premixed flames at elevated temperatures

Author

Listed:
  • Varghese, Robin John
  • Kishore, V. Ratna
  • Akram, M.
  • Yoon, Y.
  • Kumar, Sudarshan

Abstract

This paper reports the measurement of laminar burning velocities of DME (dimethyl ether)-air mixtures at higher mixture temperatures using planar flames stabilized in a controlled temperature mesoscale diverging channel. The reliability of this technique for flame speed measurement at high mixture temperatures has been established through various numerical studies using detailed 3-D computational model for DME-air mixtures. The distribution of fuel-air mass flux, reaction zone, and flame shape indicate that a planar flame is indeed formed in both transverse and depth directions of the channel. The stabilized flame is independent of any stretch effects except mild hydrodynamic strain due to channel divergence (30-50 s−1), and measured values of laminar burning velocities are within ±5% of the actual value. The experiments were carried out at various equivalence ratios (ϕ = 0.7–1.4) and elevated mixture temperatures (350–640 K). The burning velocities and temperature exponents were determined using the planar flames stabilized at different mixture inlet velocities and temperatures. Slightly rich mixtures (ϕ = 1.1) point to the maximum burning velocity, in good agreement with recent literature at ambient conditions. Temperature exponents for different equivalence ratios increase to both sides of ϕ = 1.1. Numerically calculated laminar burning velocities with different chemical kinetic schemes compared well with the measured burning velocities at higher mixture temperatures.

Suggested Citation

  • Varghese, Robin John & Kishore, V. Ratna & Akram, M. & Yoon, Y. & Kumar, Sudarshan, 2017. "Burning velocities of DME(dimethyl ether)-air premixed flames at elevated temperatures," Energy, Elsevier, vol. 126(C), pages 34-41.
    • Handle: RePEc:eee:energy:v:126:y:2017:i:c:p:34-41
    DOI: 10.1016/j.energy.2017.03.004
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217303626
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.03.004?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nair, Aswathy & Velamati, Ratna Kishore & Kumar, Sudarshan, 2016. "Effect OF CO2/N2 dilution on laminar burning velocity of liquid petroleum gas-air mixtures at elevated temperatures," Energy, Elsevier, vol. 100(C), pages 145-153.
    2. Hu, Xianzhong & Yu, Qingbo & Liu, Junxiang & Sun, Nan, 2014. "Investigation of laminar flame speeds of CH4/O2/CO2 mixtures at ordinary pressure and kinetic simulation," Energy, Elsevier, vol. 70(C), pages 626-634.
    3. Choi, Byung Chul & Park, June Sung & Ghoniem, Ahmed F., 2016. "Characteristics of outwardly propagating spherical flames of R134a(C2H2F4)/CH4/O2/N2 mixtures in a constant volume combustion chamber," Energy, Elsevier, vol. 95(C), pages 517-527.
    4. Veeraragavan, Ananthanarayanan, 2015. "On flame propagation in narrow channels with enhanced wall thermal conduction," Energy, Elsevier, vol. 93(P1), pages 631-640.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Yong & Ma, Yinjie & Xie, Deyi & Yu, Zhenhuan & E, Jiaqiang, 2021. "Numerical study on the influence of gasoline properties and thermodynamic conditions on premixed laminar flame velocity at multiple conditions," Energy, Elsevier, vol. 233(C).
    2. Zhang, Yi & Kang, Yinhu & Lu, Xiaofeng & Wang, Quanhai, 2023. "Numerical study of combustion mode and diffusive transport underlying fuel ignitions in lean stratified dimethyl ether-air premixture at various turbulence intensities," Energy, Elsevier, vol. 280(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nair, Aswathy & Velamati, Ratna Kishore & Kumar, Sudarshan, 2016. "Effect OF CO2/N2 dilution on laminar burning velocity of liquid petroleum gas-air mixtures at elevated temperatures," Energy, Elsevier, vol. 100(C), pages 145-153.
    2. Sun, Zuo-Yu & Li, Guo-Xiu, 2016. "Propagation characteristics of laminar spherical flames within homogeneous hydrogen-air mixtures," Energy, Elsevier, vol. 116(P1), pages 116-127.
    3. Hu, Xianzhong & Yu, Qingbo, 2018. "Effect of the elevated initial temperature on the laminar flame speeds of oxy-methane mixtures," Energy, Elsevier, vol. 147(C), pages 876-883.
    4. Wan, Jianlong & Fan, Aiwu & Yao, Hong & Liu, Wei, 2016. "Experimental investigation and numerical analysis on the blow-off limits of premixed CH4/air flames in a mesoscale bluff-body combustor," Energy, Elsevier, vol. 113(C), pages 193-203.
    5. Gao, Zihe & Wan, Huaxian & Ji, Jie & Bi, Yubo, 2019. "Experimental prediction on the performance and propagation of ceiling jets under the influence of wall confinement," Energy, Elsevier, vol. 178(C), pages 378-385.
    6. Feng, Biao & Yang, Zhao & Zhai, Rui, 2017. "Experimental research on the concentration characteristics of R32 and R161′ combustion product HF," Energy, Elsevier, vol. 125(C), pages 671-680.
    7. Aravind Muraleedharan & Jithin Edacheri Veetil & Akram Mohammad & Sudarshan Kumar & Ratna Kishore Velamati, 2021. "Effect of Burner Wall Material on Microjet Hydrogen Diffusion Flames near Extinction: A Numerical Study," Energies, MDPI, vol. 14(24), pages 1-24, December.
    8. Wan, Jianlong & Zhao, Haibo, 2020. "Effect of conjugate heat exchange of flame holder on laminar premixed flame stabilization in a meso-scale diverging combustor," Energy, Elsevier, vol. 198(C).
    9. Tang, Aikun & Cai, Tao & Deng, Jiang & Zhao, Dan & Huang, Qiuhan & Zhou, Chen, 2019. "Experimental study on flame structure transitions of premixed propane/air in micro-scale planar combustors," Energy, Elsevier, vol. 179(C), pages 558-570.
    10. Ruirui Wang & Jingyu Ran & Xuesen Du & Juntian Niu & Wenjie Qi, 2016. "The Influence of Slight Protuberances in a Micro-Tube Reactor on Methane/Moist Air Catalytic Combustion," Energies, MDPI, vol. 9(6), pages 1-17, May.
    11. Wan, Jianlong & Zhao, Haibo, 2017. "Dynamics of premixed CH4/air flames in a micro combustor with a plate flame holder and preheating channels," Energy, Elsevier, vol. 139(C), pages 366-379.
    12. Huang, Sheng & Zhang, Yu & Huang, Ronghua & Xu, Shijie & Ma, Yinjie & Wang, Zhaowen & Zhang, Xinhua, 2019. "Quantitative characterization of crack and cell's morphological evolution in premixed expanding spherical flames," Energy, Elsevier, vol. 171(C), pages 161-169.
    13. Xiao, Peng & Lee, Chia-fon & Wu, Han & Akram, M Zuhaib & Liu, Fushui, 2019. "Impacts of hydrogen-addition on methanol-air laminar burning coupled with pressures variation effects," Energy, Elsevier, vol. 187(C).
    14. Hu, Xianzhong & Yu, Qingbo & Sun, Yasong, 2020. "Effects of carbon dioxide on the upper flammability limits of methane in O2/CO2 atmosphere," Energy, Elsevier, vol. 208(C).
    15. Wan, Jianlong & Zhao, Haibo, 2020. "Effect of thermal condition of solid wall on the stabilization of a preheated and holder-stabilized laminar premixed flame," Energy, Elsevier, vol. 200(C).
    16. Li, Yueh-Heng & Chen, Guan-Bang & Wu, Fang-Hsien & Hsieh, Hsiu-Feng & Chao, Yei-Chin, 2016. "Effects of carbon dioxide in oxy-fuel atmosphere on catalytic combustion in a small-scale channel," Energy, Elsevier, vol. 94(C), pages 766-774.
    17. Abi Nurazaq, Warit & Wang, Wei-Cheng & Lin, Jhe-Kai, 2024. "The properties of sustainable aviation fuel II: Laminar flame speed," Energy, Elsevier, vol. 294(C).
    18. Fan, Aiwu & Zhang, He & Wan, Jianlong, 2017. "Numerical investigation on flame blow-off limit of a novel microscale Swiss-roll combustor with a bluff-body," Energy, Elsevier, vol. 123(C), pages 252-259.
    19. Zhang, Yueliang & Li, Jiangheng & Xie, Jin, 2022. "Effects of lateral cooling hole configuration on a swirl-stabilized combustor," Energy, Elsevier, vol. 259(C).
    20. Cai, Tao & Tang, Aikun & Zhao, Dan & Zhou, Chen & Huang, Qiuhan, 2020. "Flame dynamics and stability of premixed methane/air in micro-planar quartz combustors," Energy, Elsevier, vol. 193(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:126:y:2017:i:c:p:34-41. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.