IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v115y2016ip1p519-527.html
   My bibliography  Save this article

The use of enzymes for beer brewing: Thermodynamic comparison on resource use

Author

Listed:
  • van Donkelaar, Laura H.G.
  • Mostert, Joost
  • Zisopoulos, Filippos K.
  • Boom, Remko M.
  • van der Goot, Atze-Jan

Abstract

The exergetic performance of beer produced by the conventional malting and brewing process is compared with that of beer produced using an enzyme-assisted process. The aim is to estimate if the use of an exogenous enzyme formulation reduces the environmental impact of the overall brewing process. The exergy efficiency of malting was 77%. The main exergy losses stem from the use of natural gas for kilning and from starch loss during germination. The exergy efficiency of the enzyme production process ranges between 20% and 42% depending on if the by-product was considered useful. The main exergy loss was due to high power requirement for fermentation. The total exergy input in the enzyme production process was 30 times the standard chemical exergy of the enzyme, which makes it exergetically expensive. Nevertheless, the total exergy input for the production of 100 kg beer was larger for the conventional process (441 MJ) than for the enzyme-assisted process (354 MJ). Moreover, beer produced using enzymes reduced the use of water, raw materials and natural gas by 7%, 14% and 78% respectively. Consequently, the exergy loss in the enzyme production process is compensated by the prevention of exergy loss in the total beer brewing process.

Suggested Citation

  • van Donkelaar, Laura H.G. & Mostert, Joost & Zisopoulos, Filippos K. & Boom, Remko M. & van der Goot, Atze-Jan, 2016. "The use of enzymes for beer brewing: Thermodynamic comparison on resource use," Energy, Elsevier, vol. 115(P1), pages 519-527.
  • Handle: RePEc:eee:energy:v:115:y:2016:i:p1:p:519-527
    DOI: 10.1016/j.energy.2016.09.011
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216312518
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2016.09.011?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zisopoulos, Filippos K. & Moejes, Sanne N. & Rossier-Miranda, Francisco J. & van der Goot, Atze Jan & Boom, Remko M., 2015. "Exergetic comparison of food waste valorization in industrial bread production," Energy, Elsevier, vol. 82(C), pages 640-649.
    2. Jankowiak, Lena & Jonkman, Jochem & Rossier-Miranda, Francisco J. & van der Goot, Atze Jan & Boom, Remko M., 2014. "Exergy driven process synthesis for isoflavone recovery from okara," Energy, Elsevier, vol. 74(C), pages 471-483.
    3. I. Dincer & T.A.H. Ratlamwala, 2013. "Importance of exergy for analysis, improvement, design, and assessment," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 2(3), pages 335-349, May.
    4. Szargut, Jan, 1989. "Chemical exergies of the elements," Applied Energy, Elsevier, vol. 32(4), pages 269-286.
    5. Almudena Hospido & Maria Teresa Moreira & Gumersindo Feijoo, 2005. "Environmental analysis of beer production," International Journal of Agricultural Resources, Governance and Ecology, Inderscience Enterprises Ltd, vol. 4(2), pages 152-162.
    6. Szargut, Jan, 1980. "International progress in second law analysis," Energy, Elsevier, vol. 5(8), pages 709-718.
    7. Rosen, Marc A. & Dincer, Ibrahim & Kanoglu, Mehmet, 2008. "Role of exergy in increasing efficiency and sustainability and reducing environmental impact," Energy Policy, Elsevier, vol. 36(1), pages 128-137, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mourad, M. & Mahmoud, Khaled R.M., 2018. "Performance investigation of passenger vehicle fueled by propanol/gasoline blend according to a city driving cycle," Energy, Elsevier, vol. 149(C), pages 741-749.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zisopoulos, Filippos K. & Moejes, Sanne N. & Rossier-Miranda, Francisco J. & van der Goot, Atze Jan & Boom, Remko M., 2015. "Exergetic comparison of food waste valorization in industrial bread production," Energy, Elsevier, vol. 82(C), pages 640-649.
    2. Soltanian, Salman & Kalogirou, Soteris A. & Ranjbari, Meisam & Amiri, Hamid & Mahian, Omid & Khoshnevisan, Benyamin & Jafary, Tahereh & Nizami, Abdul-Sattar & Gupta, Vijai Kumar & Aghaei, Siavash & Pe, 2022. "Exergetic sustainability analysis of municipal solid waste treatment systems: A systematic critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    3. An, Qier & An, Haizhong & Wang, Lang & Huang, Xuan, 2014. "Structural and regional variations of natural resource production in China based on exergy," Energy, Elsevier, vol. 74(C), pages 67-77.
    4. Kim, Donghoi & Gundersen, Truls, 2020. "Use of exergy efficiency for the optimization of LNG processes with NGL extraction," Energy, Elsevier, vol. 197(C).
    5. Petar Sabev Varbanov & Hon Huin Chin & Alexandra-Elena Plesu Popescu & Stanislav Boldyryev, 2020. "Thermodynamics-Based Process Sustainability Evaluation," Energies, MDPI, vol. 13(9), pages 1-28, April.
    6. Zhang, Bo & Chen, G.Q., 2010. "Physical sustainability assessment for the China society: Exergy-based systems account for resources use and environmental emissions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(6), pages 1527-1545, August.
    7. Abedin, Ali Haji & Rosen, Marc A., 2012. "Closed and open thermochemical energy storage: Energy- and exergy-based comparisons," Energy, Elsevier, vol. 41(1), pages 83-92.
    8. Martin N. Nwodo & Chimay J. Anumba, 2020. "Exergetic Life Cycle Assessment: A Review," Energies, MDPI, vol. 13(11), pages 1-19, May.
    9. Nguyen, Tuong-Van & Voldsund, Mari & Elmegaard, Brian & Ertesvåg, Ivar Ståle & Kjelstrup, Signe, 2014. "On the definition of exergy efficiencies for petroleum systems: Application to offshore oil and gas processing," Energy, Elsevier, vol. 73(C), pages 264-281.
    10. Abedin, Ali Haji & Rosen, Marc A., 2012. "Assessment of a closed thermochemical energy storage using energy and exergy methods," Applied Energy, Elsevier, vol. 93(C), pages 18-23.
    11. Alvin Kiprono Bett & Saeid Jalilinasrabady, 2021. "Optimization of ORC Power Plants for Geothermal Application in Kenya by Combining Exergy and Pinch Point Analysis," Energies, MDPI, vol. 14(20), pages 1-17, October.
    12. Stanek, Wojciech & Czarnowska, Lucyna, 2018. "Thermo-ecological cost – Szargut's proposal on exergy and ecology connection," Energy, Elsevier, vol. 165(PB), pages 1050-1059.
    13. Bejan, Adrian, 2018. "Thermodynamics today," Energy, Elsevier, vol. 160(C), pages 1208-1219.
    14. L. Hay & A. H. B. Duffy & R. I. Whitfield, 2017. "The S‐Cycle Performance Matrix: Supporting Comprehensive Sustainability Performance Evaluation of Technical Systems," Systems Engineering, John Wiley & Sons, vol. 20(1), pages 45-70, January.
    15. Hao, Xiaoqing & An, Haizhong & Qi, Hai & Gao, Xiangyun, 2016. "Evolution of the exergy flow network embodied in the global fossil energy trade: Based on complex network," Applied Energy, Elsevier, vol. 162(C), pages 1515-1522.
    16. Josip Orović & Vedran Mrzljak & Igor Poljak, 2018. "Efficiency and Losses Analysis of Steam Air Heater from Marine Steam Propulsion Plant," Energies, MDPI, vol. 11(11), pages 1-18, November.
    17. Ziya Sogut, M., 2021. "New approach for assessment of environmental effects based on entropy optimization of jet engine," Energy, Elsevier, vol. 234(C).
    18. van der Kroon, Bianca & Brouwer, Roy & van Beukering, Pieter J.H., 2013. "The energy ladder: Theoretical myth or empirical truth? Results from a meta-analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 504-513.
    19. Chen, G.Q. & Qi, Z.H., 2007. "Systems account of societal exergy utilization: China 2003," Ecological Modelling, Elsevier, vol. 208(2), pages 102-118.
    20. Cullen, Jonathan M. & Allwood, Julian M., 2010. "Theoretical efficiency limits for energy conversion devices," Energy, Elsevier, vol. 35(5), pages 2059-2069.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:115:y:2016:i:p1:p:519-527. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.