IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v114y2016icp995-1006.html
   My bibliography  Save this article

Operational energy minimisation for forced draft, direct-contact bulk air cooling tower through a combination of forward and first-principle modelling, coupled with an optimisation platform

Author

Listed:
  • Bornman, Waldo
  • Dirker, Jaco
  • Arndt, Deon C.
  • Meyer, Josua P.

Abstract

Bulk air coolers (BACs) are extensively used in the deep-level mining industry to cool ambient air for underground use. BACs contribute significantly to the mine's chilled water requirements and it was therefore the purpose of this study to utilise a modelling method to predict the thermal performance of mechanically ventilated direct-contact bulk air cooling towers and perform energy optimisation. The model consisted of a combination of forward and first-principle methods based on underlying energy balance and heat transfer principles. The model allowed for the explicit estimation of the BAC outlet conditions for given inlet conditions, without the need for iterative calculations. This model was validated with operational data obtained from a bulk air cooler of a deep-level gold mine in South Africa. Average prediction errors of between 0.5 °C and 0.7 °C for the outlet water temperature were achieved. Subsequently, the model was coupled with an optimisation platform to optimise the electrical energy consumption of the BAC. Energy savings of 13% were obtained using the optimisation model for a period of high energy demand. This paper showed that such a modelling and optimisation approach could be useful to reduce the operation energy cost of thermal systems in general.

Suggested Citation

  • Bornman, Waldo & Dirker, Jaco & Arndt, Deon C. & Meyer, Josua P., 2016. "Operational energy minimisation for forced draft, direct-contact bulk air cooling tower through a combination of forward and first-principle modelling, coupled with an optimisation platform," Energy, Elsevier, vol. 114(C), pages 995-1006.
    • Handle: RePEc:eee:energy:v:114:y:2016:i:c:p:995-1006
    DOI: 10.1016/j.energy.2016.08.069
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216311823
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2016.08.069?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wei, Xiupeng & Xu, Guanglin & Kusiak, Andrew, 2014. "Modeling and optimization of a chiller plant," Energy, Elsevier, vol. 73(C), pages 898-907.
    2. Khamis Mansour, M. & Hassab, M.A., 2014. "Innovative correlation for calculating thermal performance of counterflow wet-cooling tower," Energy, Elsevier, vol. 74(C), pages 855-862.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ma, Keyan & Liu, Mingsheng & Zhang, Jili, 2021. "Online optimization method of cooling water system based on the heat transfer model for cooling tower," Energy, Elsevier, vol. 231(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ayoub, Ali & Gjorgiev, Blaže & Sansavini, Giovanni, 2018. "Cooling towers performance in a changing climate: Techno-economic modeling and design optimization," Energy, Elsevier, vol. 160(C), pages 1133-1143.
    2. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Modeling and Optimization of a CoolingTower-Assisted Heat Pump System," Energies, MDPI, vol. 10(5), pages 1-18, May.
    3. Thangavelu, Sundar Raj & Myat, Aung & Khambadkone, Ashwin, 2017. "Energy optimization methodology of multi-chiller plant in commercial buildings," Energy, Elsevier, vol. 123(C), pages 64-76.
    4. Verma, Anoop & Asadi, Ali & Yang, Kai & Tyagi, Satish, 2015. "A data-driven approach to identify households with plug-in electrical vehicles (PEVs)," Applied Energy, Elsevier, vol. 160(C), pages 71-79.
    5. Suryakant, & Tyagi, Satish, 2015. "Optimization of a platform configuration with generational changes," International Journal of Production Economics, Elsevier, vol. 169(C), pages 299-309.
    6. Ma, Keyan & Liu, Mingsheng & Zhang, Jili, 2021. "Online optimization method of cooling water system based on the heat transfer model for cooling tower," Energy, Elsevier, vol. 231(C).
    7. Guo, Fangzhou & Li, Ao & Yue, Bao & Xiao, Ziwei & Xiao, Fu & Yan, Rui & Li, Anbang & Lv, Yan & Su, Bing, 2024. "Improving the out-of-sample generalization ability of data-driven chiller performance models using physics-guided neural network," Applied Energy, Elsevier, vol. 354(PA).
    8. Ono, Hitoi & Ohtani, Yuichi & Matsuo, Minoru & Yamaguchi, Toru & Yokoyama, Ryohei, 2021. "Optimal operation of heat source and air conditioning system with thermal storage tank using nonlinear programming," Energy, Elsevier, vol. 222(C).
    9. Grágeda, Mario & González, Alonso & Alavia, Wilson & Ushak, Svetlana, 2015. "Development and optimization of a modified process for producing the battery grade LiOH: Optimization of energy and water consumption," Energy, Elsevier, vol. 89(C), pages 667-677.
    10. Ho, W.T. & Yu, F.W., 2021. "Improved model and optimization for the energy performance of chiller system with diverse component staging," Energy, Elsevier, vol. 217(C).
    11. Cui, Haijiao & Li, Nianping & Peng, Jinqing & Cheng, Jianlin & Li, Shengbing, 2016. "Study on the dynamic and thermal performances of a reversibly used cooling tower with upward spraying," Energy, Elsevier, vol. 96(C), pages 268-277.
    12. Javadpour, Reza & Zeinali Heris, Saeed & Mohammadfam, Yaghoub, 2021. "Optimizing the effect of concentration and flow rate of water/ MWCNTs nanofluid on the performance of a forced draft cross-flow cooling tower," Energy, Elsevier, vol. 217(C).
    13. Daishi Sagawa & Kenji Tanaka, 2023. "Machine Learning-Based Estimation of COP and Multi-Objective Optimization of Operation Strategy for Heat Source Considering Electricity Cost and On-Site Consumption of Renewable Energy," Energies, MDPI, vol. 16(13), pages 1-26, June.
    14. Sonmez, Mustafa & Akgüngör, Ali Payıdar & Bektaş, Salih, 2017. "Estimating transportation energy demand in Turkey using the artificial bee colony algorithm," Energy, Elsevier, vol. 122(C), pages 301-310.
    15. Salimian Rizi, Behzad & Pavlak, Gregory & Cushing, Vincent & Heidarinejad, Mohammad, 2023. "Predicting uncertainty of a chiller plant power consumption using quantile random forest: A commercial building case study," Energy, Elsevier, vol. 283(C).
    16. Wei Yuan & Fengzhong Sun & Ruqing Liu & Xuehong Chen & Ying Li, 2020. "The Effect of Air Parameters on the Evaporation Loss in a Natural Draft Counter-Flow Wet Cooling Tower," Energies, MDPI, vol. 13(23), pages 1-16, November.
    17. Guerras, Lidia S. & Martín, Mariano, 2020. "On the water footprint in power production: Sustainable design of wet cooling towers," Applied Energy, Elsevier, vol. 263(C).
    18. Wang, Huijie & Qiu, Baoyun & Zhao, Fangling & Yan, Tianxu, 2023. "Method for increasing net power of power plant based on operation optimization of circulating cooling water system," Energy, Elsevier, vol. 282(C).
    19. Elnazeer Ali Hamid Abdalla & Perumal Nallagownden & Nursyarizal Bin Mohd Nor & Mohd Fakhizan Romlie & Sabo Miya Hassan, 2018. "An Application of a Novel Technique for Assessing the Operating Performance of Existing Cooling Systems on a University Campus," Energies, MDPI, vol. 11(4), pages 1-24, March.
    20. Wu, Zhiyong & Lu, Zhibin & Zhang, Bingjian & He, Chang & Chen, Qinglin & Yu, Haoshui & Ren, Jingzheng, 2022. "Stochastic bi-objective optimization for closed wet cooling tower systems based on a simplified analytical model," Energy, Elsevier, vol. 250(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:114:y:2016:i:c:p:995-1006. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.