IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v107y2016icp295-304.html
   My bibliography  Save this article

Pore scale investigation of gaseous mixture flow in porous anode of solid oxide fuel cell

Author

Listed:
  • Dang, Zheng
  • Xu, Han

Abstract

A two-fluid finite-difference LB (Lattice Boltzmann) model is developed for multi-component flow. Then, a pore scale LB model is further developed for multi-component flow in porous media with heterogeneous microstructure. Thus, the present LB model is independent on any structure statistical parameters of the porous media, which is contrary to the numerical methods assuming the porous media is homogeneous. Compared with existing LB models for multi-component flow in the SOFC (solid oxide fuel cell) anode, the present LB model is capable of simulating mixture flow with larger ratios of molecular weights, thus it is qualified to meet the fuel flexibility of the SOFC. By using this model, the mass transfer of gaseous mixture flow in a SOFC anode is studied and the local molar fraction distributions of gaseous mixture are obtained within the irregular porous anode directly. The influences of anode microstructure, dimensionless reaction flux and fuel composition on anode performance are investigated. The quantitative relationship between the porous microstructure and anode performance is obtained.

Suggested Citation

  • Dang, Zheng & Xu, Han, 2016. "Pore scale investigation of gaseous mixture flow in porous anode of solid oxide fuel cell," Energy, Elsevier, vol. 107(C), pages 295-304.
  • Handle: RePEc:eee:energy:v:107:y:2016:i:c:p:295-304
    DOI: 10.1016/j.energy.2016.04.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216304133
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2016.04.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Papurello, Davide & Lanzini, Andrea & Drago, Davide & Leone, Pierluigi & Santarelli, Massimo, 2016. "Limiting factors for planar solid oxide fuel cells under different trace compound concentrations," Energy, Elsevier, vol. 95(C), pages 67-78.
    2. Yang, Fei & Gu, Jianmin & Ye, Luhan & Zhang, Zuoxiang & Rao, Gaofeng & Liang, Yachun & Wen, Kechun & Zhao, Jiyun & Goodenough, John B. & He, Weidong, 2016. "Justifying the significance of Knudsen diffusion in solid oxide fuel cells," Energy, Elsevier, vol. 95(C), pages 242-246.
    3. Baldinelli, Arianna & Barelli, Linda & Bidini, Gianni, 2015. "Performance characterization and modelling of syngas-fed SOFCs (solid oxide fuel cells) varying fuel composition," Energy, Elsevier, vol. 90(P2), pages 2070-2084.
    4. Tonekabonimoghadam, S. & Akikur, R.K. & Hussain, M.A. & Hajimolana, S. & Saidur, R. & Ping, H.W. & Chakrabarti, M.H. & Brandon, N.P. & Aravind, P.V. & Nayagar, J.N.S. & Hashim, M.A., 2015. "Mathematical modelling and experimental validation of an anode-supported tubular solid oxide fuel cell for heat and power generation," Energy, Elsevier, vol. 90(P2), pages 1759-1768.
    5. Amedi, Hamid Reza & Bazooyar, Bahamin & Pishvaie, Mahmoud Reza, 2015. "Control of anode supported SOFCs (solid oxide fuel cells): Part I. mathematical modeling and state estimation within one cell," Energy, Elsevier, vol. 90(P1), pages 605-621.
    6. Iwai, H. & Yamamoto, Y. & Saito, M. & Yoshida, H., 2011. "Numerical simulation of intermediate-temperature direct-internal-reforming planar solid oxide fuel cell," Energy, Elsevier, vol. 36(4), pages 2225-2234.
    7. Xu, Han & Dang, Zheng & Bai, Bo-Feng, 2014. "Electrochemical performance study of solid oxide fuel cell using lattice Boltzmann method," Energy, Elsevier, vol. 67(C), pages 575-583.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rashid, Kashif & Dong, Sang Keun & Mehran, Muhammad Taqi, 2017. "Numerical investigations to determine the optimal operating conditions for 1 kW-class flat-tubular solid oxide fuel cell stack," Energy, Elsevier, vol. 141(C), pages 673-691.
    2. Lee, Sanghyeok & Park, Mansoo & Kim, Hyoungchul & Yoon, Kyung Joong & Son, Ji-Won & Lee, Jong-Ho & Kim, Byung-Kook & Choi, Wonjoon & Hong, Jongsup, 2017. "Thermal conditions and heat transfer characteristics of high-temperature solid oxide fuel cells investigated by three-dimensional numerical simulations," Energy, Elsevier, vol. 120(C), pages 293-305.
    3. Li, Ang & Song, Ce & Lin, Zijing, 2017. "A multiphysics fully coupled modeling tool for the design and operation analysis of planar solid oxide fuel cell stacks," Applied Energy, Elsevier, vol. 190(C), pages 1234-1244.
    4. Cavalli, A. & Fernandes, A. & Aravind, P.V., 2021. "Thermodynamic analysis of an improved integrated biomass gasifier solid oxide fuel cell micro combined heat and power system," Energy, Elsevier, vol. 231(C).
    5. Zhou, Juan & Liu, Qinglin & Zhang, Lan & Pan, Zehua & Chan, Siew Hwa, 2016. "Influence of pore former on electrochemical performance of fuel-electrode supported SOFCs manufactured by aqueous-based tape-casting," Energy, Elsevier, vol. 115(P1), pages 149-154.
    6. Liu, He & Qin, Jiang & Li, Chenghao & Wang, Jingyi & Wang, Cong & Dong, Peng, 2024. "Numerical performance analysis of the solid oxide fuel cell for aviation hybrid power system," Energy, Elsevier, vol. 287(C).
    7. Rokni, Masoud, 2014. "Biomass gasification integrated with a solid oxide fuel cell and Stirling engine," Energy, Elsevier, vol. 77(C), pages 6-18.
    8. Tanveer, Waqas Hassan & Rezk, Hegazy & Nassef, Ahmed & Abdelkareem, Mohammad Ali & Kolosz, Ben & Karuppasamy, K. & Aslam, Jawad & Gilani, Syed Omer, 2020. "Improving fuel cell performance via optimal parameters identification through fuzzy logic based-modeling and optimization," Energy, Elsevier, vol. 204(C).
    9. Jiao, Yong & Zhang, Liqin & An, Wenting & Zhou, Wei & Sha, Yujing & Shao, Zongping & Bai, Jianping & Li, Si-Dian, 2016. "Controlled deposition and utilization of carbon on Ni-YSZ anodes of SOFCs operating on dry methane," Energy, Elsevier, vol. 113(C), pages 432-443.
    10. Khazaee, I. & Rava, A., 2017. "Numerical simulation of the performance of solid oxide fuel cell with different flow channel geometries," Energy, Elsevier, vol. 119(C), pages 235-244.
    11. Roberto Paglini & Marta Gandiglio & Andrea Lanzini, 2022. "Technologies for Deep Biogas Purification and Use in Zero-Emission Fuel Cells Systems," Energies, MDPI, vol. 15(10), pages 1-30, May.
    12. Tafaoli-Masoule, M. & Bahrami, A. & Elsayed, E.M., 2014. "Optimum design parameters and operating condition for maximum power of a direct methanol fuel cell using analytical model and genetic algorithm," Energy, Elsevier, vol. 70(C), pages 643-652.
    13. Papurello, Davide & Chiodo, Vitaliano & Maisano, Susanna & Lanzini, Andrea & Santarelli, Massimo, 2018. "Catalytic stability of a Ni-Catalyst towards biogas reforming in the presence of deactivating trace compounds," Renewable Energy, Elsevier, vol. 127(C), pages 481-494.
    14. Zeng, Zezhi & Qian, Yuping & Zhang, Yangjun & Hao, Changkun & Dan, Dan & Zhuge, Weilin, 2020. "A review of heat transfer and thermal management methods for temperature gradient reduction in solid oxide fuel cell (SOFC) stacks," Applied Energy, Elsevier, vol. 280(C).
    15. Kupecki, Jakub & Papurello, Davide & Lanzini, Andrea & Naumovich, Yevgeniy & Motylinski, Konrad & Blesznowski, Marcin & Santarelli, Massimo, 2018. "Numerical model of planar anode supported solid oxide fuel cell fed with fuel containing H2S operated in direct internal reforming mode (DIR-SOFC)," Applied Energy, Elsevier, vol. 230(C), pages 1573-1584.
    16. Habibollahzade, Ali & Rosen, Marc A., 2021. "Syngas-fueled solid oxide fuel cell functionality improvement through appropriate feedstock selection and multi-criteria optimization using Air/O2-enriched-air gasification agents," Applied Energy, Elsevier, vol. 286(C).
    17. Jiang, Jianhua & Shen, Tan & Deng, Zhonghua & Fu, Xiaowei & Li, Jian & Li, Xi, 2018. "High efficiency thermoelectric cooperative control of a stand-alone solid oxide fuel cell system with an air bypass valve," Energy, Elsevier, vol. 152(C), pages 13-26.
    18. Jienkulsawad, Prathak & Arpornwichanop, Amornchai, 2016. "Investigating the performance of a solid oxide fuel cell and a molten carbonate fuel cell combined system," Energy, Elsevier, vol. 107(C), pages 843-853.
    19. Chen, Jinwei & Hu, Zhenchao & Lu, Jinzhi & Zhang, Huisheng & Weng, Shilie, 2022. "A novel control strategy with an anode variable geometry ejector for a SOFC-GT hybrid system," Energy, Elsevier, vol. 261(PA).
    20. Wang, Ligang & Rao, Megha & Diethelm, Stefan & Lin, Tzu-En & Zhang, Hanfei & Hagen, Anke & Maréchal, François & Van herle, Jan, 2019. "Power-to-methane via co-electrolysis of H2O and CO2: The effects of pressurized operation and internal methanation," Applied Energy, Elsevier, vol. 250(C), pages 1432-1445.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:107:y:2016:i:c:p:295-304. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.