IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v97y2012icp686-694.html
   My bibliography  Save this article

Design of the steam generator in an energy conversion system based on the aluminum combustion with water

Author

Listed:
  • Mercati, Stefano
  • Milani, Massimo
  • Montorsi, Luca
  • Paltrinieri, Fabrizio

Abstract

The paper shows the preliminary design of the superheated steam generator to be used in a novel hydrogen production and energy conversion system based on the combustion of aluminum particles with water. The system is aimed at producing hydrogen and pressurized superheated steam, using the heat released by the Al–H2O reaction. The interest on this type of technology arises because of the possibility of obtaining hydrogen with very low pollutant and greenhouse gas emissions, compared to the traditional hydrogen production systems, such as the steam reforming from methane.

Suggested Citation

  • Mercati, Stefano & Milani, Massimo & Montorsi, Luca & Paltrinieri, Fabrizio, 2012. "Design of the steam generator in an energy conversion system based on the aluminum combustion with water," Applied Energy, Elsevier, vol. 97(C), pages 686-694.
    • Handle: RePEc:eee:appene:v:97:y:2012:i:c:p:686-694
    DOI: 10.1016/j.apenergy.2012.01.028
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261912000347
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2012.01.028?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Feng, Xiao & Wang, Li & Min, Shuling, 2009. "Industrial emergy evaluation for hydrogen production systems from biomass and natural gas," Applied Energy, Elsevier, vol. 86(9), pages 1767-1773, September.
    2. Galanti, Leandro & Franzoni, Alessandro & Traverso, Alberto & Massardo, Aristide F., 2011. "Existing large steam power plant upgraded for hydrogen production," Applied Energy, Elsevier, vol. 88(5), pages 1510-1518, May.
    3. Wang, Huizhi & Leung, Dennis Y.C. & Leung, Michael K.H., 2012. "Energy analysis of hydrogen and electricity production from aluminum-based processes," Applied Energy, Elsevier, vol. 90(1), pages 100-105.
    4. Liu, Qibin & Hong, Hui & Yuan, Jianli & Jin, Hongguang & Cai, Ruixian, 2009. "Experimental investigation of hydrogen production integrated methanol steam reforming with middle-temperature solar thermal energy," Applied Energy, Elsevier, vol. 86(2), pages 155-162, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ferruzza, Davide & Kærn, Martin Ryhl & Haglind, Fredrik, 2019. "Design of header and coil steam generators for concentrating solar power applications accounting for low-cycle fatigue requirements," Applied Energy, Elsevier, vol. 236(C), pages 793-803.
    2. Oruc, Onur & Dincer, Ibrahim, 2021. "Development and performance assessment power generating systems using clean hydrogen," Energy, Elsevier, vol. 215(PB).
    3. Xianhe Chen & Zhixun Xia & Liya Huang & Likun Ma, 2016. "Numerical Simulation of a Vortex Combustor Based on Aluminum and Steam," Energies, MDPI, vol. 9(12), pages 1-16, December.
    4. Pini, Martina & Breglia, Giovanni & Venturelli, Matteo & Montorsi, Luca & Milani, Massimo & Neri, Paolo & Ferrari, Anna Maria, 2020. "Life cycle assessment of an innovative cogeneration system based on the aluminum combustion with water," Renewable Energy, Elsevier, vol. 154(C), pages 532-541.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Galanti, Leandro & Franzoni, Alessandro & Traverso, Alberto & Massardo, Aristide F., 2011. "Existing large steam power plant upgraded for hydrogen production," Applied Energy, Elsevier, vol. 88(5), pages 1510-1518, May.
    2. Hong, Hui & Liu, Qibin & Jin, Hongguang, 2012. "Operational performance of the development of a 15kW parabolic trough mid-temperature solar receiver/reactor for hydrogen production," Applied Energy, Elsevier, vol. 90(1), pages 137-141.
    3. Wijaya, Willy Yanto & Kawasaki, Shunsuke & Watanabe, Hirotatsu & Okazaki, Ken, 2012. "Damköhler number as a descriptive parameter in methanol steam reforming and its integration with absorption heat pump system," Applied Energy, Elsevier, vol. 94(C), pages 141-147.
    4. AlNouss, Ahmed & McKay, Gordon & Al-Ansari, Tareq, 2020. "Enhancing waste to hydrogen production through biomass feedstock blending: A techno-economic-environmental evaluation," Applied Energy, Elsevier, vol. 266(C).
    5. Peralta-Ruiz, Y. & González-Delgado, A.-D. & Kafarov, V., 2013. "Evaluation of alternatives for microalgae oil extraction based on exergy analysis," Applied Energy, Elsevier, vol. 101(C), pages 226-236.
    6. Jiang, Dongyue & Yang, Wenming & Tang, Aikun, 2016. "A refractory selective solar absorber for high performance thermochemical steam reforming," Applied Energy, Elsevier, vol. 170(C), pages 286-292.
    7. Li, Sheng & Sui, Jun & Jin, Hongguang & Zheng, Jianjiao, 2013. "Full chain energy performance for a combined cooling, heating and power system running with methanol and solar energy," Applied Energy, Elsevier, vol. 112(C), pages 673-681.
    8. Zhang, Peiye & Liu, Ming & Mu, Ruiqi & Yan, Junjie, 2024. "Exergy-based control strategy design and dynamic performance enhancement for parabolic trough solar receiver-reactor of methanol decomposition reaction," Renewable Energy, Elsevier, vol. 224(C).
    9. Kim, Sung Han & Miesse, Craig M. & Lee, Hee Bum & Chang, Ik Whang & Hwang, Yong Sheen & Jang, Jae Hyuk & Cha, Suk Won, 2014. "Ultra compact direct hydrogen fuel cell prototype using a metal hydride hydrogen storage tank for a mobile phone," Applied Energy, Elsevier, vol. 134(C), pages 382-391.
    10. Li, Chunlin & Xu, Hengyong & Hou, Shoufu & Sun, Jian & Meng, Fanqiong & Ma, Junguo & Tsubaki, Noritatsu, 2013. "SiC foam monolith catalyst for pressurized adiabatic methane reforming," Applied Energy, Elsevier, vol. 107(C), pages 297-303.
    11. Nimmanterdwong, Prathana & Chalermsinsuwan, Benjapon & Piumsomboon, Pornpote, 2017. "Emergy analysis of three alternative carbon dioxide capture processes," Energy, Elsevier, vol. 128(C), pages 101-108.
    12. Shi, Yaolu & Sun, Jie & Wei, Jinjia, 2024. "Proposal of a parabolic-trough-oriented photo-thermo-reactor with coaxial baffles and dual-bed for high-efficient solar-driven hydrogen production from methanol steam reforming," Renewable Energy, Elsevier, vol. 228(C).
    13. Wang, Yangjie & Li, Qiang & Li, Dianhong & Hong, Hui, 2018. "Thermodynamic analysis for a concentrating photovoltaic-photothermochemical hybrid system," Energy, Elsevier, vol. 148(C), pages 528-536.
    14. Rivarolo, M. & Magistri, L. & Massardo, A.F., 2014. "Hydrogen and methane generation from large hydraulic plant: Thermo-economic multi-level time-dependent optimization," Applied Energy, Elsevier, vol. 113(C), pages 1737-1745.
    15. Bai, Zhang & Liu, Qibin & Gong, Liang & Lei, Jing, 2019. "Application of a mid-/low-temperature solar thermochemical technology in the distributed energy system with cooling, heating and power production," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    16. Cheng, Ze-Dong & Men, Jing-Jing & Liu, Shi-Cheng & He, Ya-Ling, 2019. "Three-dimensional numerical study on a novel parabolic trough solar receiver-reactor of a locally-installed Kenics static mixer for efficient hydrogen production," Applied Energy, Elsevier, vol. 250(C), pages 131-146.
    17. Wang, Yangjie & Li, Qiang & Xuan, Yimin, 2019. "Thermal and chemical reaction performance analyses of solar thermochemical volumetric receiver/reactor with nanofluid," Energy, Elsevier, vol. 189(C).
    18. Khan, Zakir & Yusup, Suzana & Kamble, Prashant & Naqvi, Muhammad & Watson, Ian, 2018. "Assessment of energy flows and energy efficiencies in integrated catalytic adsorption steam gasification for hydrogen production," Applied Energy, Elsevier, vol. 225(C), pages 346-355.
    19. Arab Aboosadi, Z. & Jahanmiri, A.H. & Rahimpour, M.R., 2011. "Optimization of tri-reformer reactor to produce synthesis gas for methanol production using differential evolution (DE) method," Applied Energy, Elsevier, vol. 88(8), pages 2691-2701, August.
    20. Wang, Tiejun & Yang, Yong & Ding, Mingyue & Liu, Qiying & Ma, Longlong, 2013. "Auto-thermal reforming of biomass raw fuel gas to syngas in a novel reformer: Promotion of hot-electron," Applied Energy, Elsevier, vol. 112(C), pages 448-453.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:97:y:2012:i:c:p:686-694. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.