IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v77y2004i3p317-325.html
   My bibliography  Save this article

Experimental comparative study of the performances of single and double basin solar-stills

Author

Listed:
  • Al-Karaghouli, A. A.
  • Alnaser, W. E.

Abstract

Two solar-stills (single basin and double decker) were fully fabricated and tested at the Campus of the University of Bahrain. Both stills have the same basin area. The inner dimensions of each were 90x50 cm (effective area is 0.45 m2). For the double decker basin solar-still, the upper glass cover and the first basin were tilted at 12° with respect to the horizontal, while for the single-basin solar-still, the glass cover was tilted at 36° with respect to the horizontal. Several copper-constantan thermocouples were installed in both stills to measure the glass cover temperature, the chamber temperature, the water temperature and the ambient-air temperature. The hourly amount of extracted distilled water, the various temperatures and the insolation were monitored for a five-month period (February-June). Two types of measurements were performed; one with still-sides insulation and the other without. It was found that the monthly average amount of the total daily-distilled water production was highest in June for both types of stills. This is expected, since the insolation during this month is higher than that in any other month during the testing period. For the double-basin still, with sides insulated, the June production was 1760 ml per day (3.91 l/m2/day), and in the non-sides insulation case the total daily amount was 1410 ml per day (3.13 l/m2/day). For the single-basin still, the June daily production was 1280 ml per day (2.84 l/m2/day) in the case of stills with sides insulation and 1105 ml (2.455 l/m2/day) in the case of no-side insulation. In February, March, April and May the average total daily productions were 1045, 1340, 1420 and 1630 ml per day in the case of stills with sides insulated and 843, 936, 1045 and 1180 ml per day in the case of no-side insulation of the double-basin still respectively. For the single-basin still, the production were 720, 765, 890 and 1010 ml per day in the case of stills with sides insulated respectively, and 655, 745, 810 and 945 ml in the case of no-side insulation respectively. These measurements reveal the following: (i) adding 2.5 cm of styrobore insulation material to the solar stills' sides causes a noticeable increase in water production; and (ii) the daily average still production for the double-basin still is around 40% higher than the production of the single-basin still.

Suggested Citation

  • Al-Karaghouli, A. A. & Alnaser, W. E., 2004. "Experimental comparative study of the performances of single and double basin solar-stills," Applied Energy, Elsevier, vol. 77(3), pages 317-325, March.
  • Handle: RePEc:eee:appene:v:77:y:2004:i:3:p:317-325
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(03)00124-7
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mohamad, M. A. & Soliman, S. H. & Abdel-Salam, M. S. & Hussein, H. M. S., 1995. "Experimental and financial investigation of asymmetrical solar stills with different insulation," Applied Energy, Elsevier, vol. 52(2-3), pages 265-271.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xie, Guo & Sun, Licheng & Mo, Zhengyu & Liu, Hongtao & Du, Min, 2016. "Conceptual design and experimental investigation involving a modular desalination system composed of arrayed tubular solar stills," Applied Energy, Elsevier, vol. 179(C), pages 972-984.
    2. Chen, Yih-Hang & Li, Yu-Wei & Chang, Hsuan, 2012. "Optimal design and control of solar driven air gap membrane distillation desalination systems," Applied Energy, Elsevier, vol. 100(C), pages 193-204.
    3. El-Sebaii, A.A. & El-Bialy, E., 2015. "Advanced designs of solar desalination systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 49(C), pages 1198-1212.
    4. Mahkamov, Khamid & Orda, Eugene & Belgasim, Basim & Makhkamova, Irina, 2015. "A novel small dynamic solar thermal desalination plant with a fluid piston converter," Applied Energy, Elsevier, vol. 156(C), pages 715-726.
    5. Reif, John H. & Alhalabi, Wadee, 2015. "Solar-thermal powered desalination: Its significant challenges and potential," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 152-165.
    6. Obai Younis & Ahmed Kadhim Hussein & Mohammed El Hadi Attia & Hakim S. Sultan Aljibori & Lioua Kolsi & Hussein Togun & Bagh Ali & Aissa Abderrahmane & Khanyaluck Subkrajang & Anuwat Jirawattanapanit, 2022. "Comprehensive Review on Solar Stills—Latest Developments and Overview," Sustainability, MDPI, vol. 14(16), pages 1-59, August.
    7. El-Ghonemy, A.M.K., 2012. "Water desalination systems powered by renewable energy sources: Review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(3), pages 1537-1556.
    8. Sharshir, S.W. & Peng, Guilong & Wu, Lirong & Essa, F.A. & Kabeel, A.E. & Yang, Nuo, 2017. "The effects of flake graphite nanoparticles, phase change material, and film cooling on the solar still performance," Applied Energy, Elsevier, vol. 191(C), pages 358-366.
    9. Rabhy, Omar O. & Adam, I.G. & Elsayed Youssef, M. & Rashad, A.B. & Hassan, Gasser E., 2019. "Numerical and experimental analyses of a transparent solar distiller for an agricultural greenhouse," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    10. Husam S. Al-Duais & Muhammad Azzam Ismail & Zakaria Alcheikh Mahmoud Awad & Karam M. Al-Obaidi, 2022. "Performance Evaluation of Solar-Powered Atmospheric Water Harvesting Using Different Glazing Materials in the Tropical Built Environment: An Experimental Study," Energies, MDPI, vol. 15(9), pages 1-19, April.
    11. Xie, Guo & Sun, Licheng & Yan, Tiantong & Tang, Jiguo & Bao, Jingjing & Du, Min, 2018. "Model development and experimental verification for tubular solar still operating under vacuum condition," Energy, Elsevier, vol. 157(C), pages 115-130.
    12. Xiao, Gang & Wang, Xihui & Ni, Mingjiang & Wang, Fei & Zhu, Weijun & Luo, Zhongyang & Cen, Kefa, 2013. "A review on solar stills for brine desalination," Applied Energy, Elsevier, vol. 103(C), pages 642-652.
    13. El-Ghonemy, A.M.K., 2012. "Future sustainable water desalination technologies for the Saudi Arabia: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(9), pages 6566-6597.
    14. Ismail, Basel I., 2009. "Design and performance of a transportable hemispherical solar still," Renewable Energy, Elsevier, vol. 34(1), pages 145-150.
    15. Karimi Estahbanati, M.R. & Feilizadeh, Mehrzad & Jafarpur, Khosrow & Feilizadeh, Mansoor & Rahimpour, Mohammad Reza, 2015. "Experimental investigation of a multi-effect active solar still: The effect of the number of stages," Applied Energy, Elsevier, vol. 137(C), pages 46-55.
    16. Feilizadeh, Mansoor & Karimi Estahbanati, M.R. & Jafarpur, Khosrow & Roostaazad, Reza & Feilizadeh, Mehrzad & Taghvaei, Hamed, 2015. "Year-round outdoor experiments on a multi-stage active solar still with different numbers of solar collectors," Applied Energy, Elsevier, vol. 152(C), pages 39-46.
    17. Karimi Estahbanati, M.R. & Ahsan, Amimul & Feilizadeh, Mehrzad & Jafarpur, Khosrow & Ashrafmansouri, Seyedeh-Saba & Feilizadeh, Mansoor, 2016. "Theoretical and experimental investigation on internal reflectors in a single-slope solar still," Applied Energy, Elsevier, vol. 165(C), pages 537-547.
    18. Maddah, Hisham A. & Bassyouni, M. & Abdel-Aziz, M.H. & Zoromba, M. Sh & Al-Hossainy, A.F., 2020. "Performance estimation of a mini-passive solar still via machine learning," Renewable Energy, Elsevier, vol. 162(C), pages 489-503.
    19. Rajaseenivasan, T. & Murugavel, K. Kalidasa & Elango, T. & Hansen, R. Samuel, 2013. "A review of different methods to enhance the productivity of the multi-effect solar still," Renewable and Sustainable Energy Reviews, Elsevier, vol. 17(C), pages 248-259.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ahsan, A. & Imteaz, M. & Thomas, U.A. & Azmi, M. & Rahman, A. & Nik Daud, N.N., 2014. "Parameters affecting the performance of a low cost solar still," Applied Energy, Elsevier, vol. 114(C), pages 924-930.
    2. Jaber, J. O. & Probert, S. D. & Badr, O., 1997. "Water scarcity: A fundamental crisis for Jordan," Applied Energy, Elsevier, vol. 57(2-3), pages 103-127, June.
    3. Sharshir, S.W. & Peng, Guilong & Wu, Lirong & Essa, F.A. & Kabeel, A.E. & Yang, Nuo, 2017. "The effects of flake graphite nanoparticles, phase change material, and film cooling on the solar still performance," Applied Energy, Elsevier, vol. 191(C), pages 358-366.
    4. Shoeibi, Shahin & Rahbar, Nader & Abedini Esfahlani, Ahad & Kargarsharifabad, Hadi, 2020. "Application of simultaneous thermoelectric cooling and heating to improve the performance of a solar still: An experimental study and exergy analysis," Applied Energy, Elsevier, vol. 263(C).
    5. Al-Karaghouli, A. A. & Alnaser, W. E., 2004. "Performances of single and double basin solar-stills," Applied Energy, Elsevier, vol. 78(3), pages 347-354, July.
    6. Xiao, Gang & Wang, Xihui & Ni, Mingjiang & Wang, Fei & Zhu, Weijun & Luo, Zhongyang & Cen, Kefa, 2013. "A review on solar stills for brine desalination," Applied Energy, Elsevier, vol. 103(C), pages 642-652.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:77:y:2004:i:3:p:317-325. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.