IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v355y2024ics0306261923017117.html
   My bibliography  Save this article

Hydrogen-rich carbon recycling complex system establishment and comprehensive evaluation

Author

Listed:
  • Zhang, Huining
  • Liu, Xueting
  • Wang, Pufan
  • Wang, Qiqi
  • Lu, Liping
  • Yang, Liang
  • Jiang, Pingguo
  • Liang, Yong
  • Liao, Chunfa

Abstract

Hydrogen-rich carbon recycling complex system coupling CO2 reduction with waste heat conversion efficiently is becoming a vigorous horizon stepping forward carbon peak and carbon neutrality with great strides in metallurgical industrial sectors. This article originally proposes an in-situ waste plastics gasification complex system utilizing blast furnace flue gas waste heat for hydrogen-rich preparation and CO2 reduction simultaneously, and the effect of parameters such as temperature, pressure, etc. on syngas yield, CO2 conversion rate, etc. are systemically discussed in detail, furthermore, the techno-economic analysis and priorities of this complex system are obtained through originally comparing intensifying factor and substitution coke ratio. The results show that waste plastics conversion rate, hydrogen and syngas yield have a positive relationship with temperature, but opposite with pressure. Hydrogen preparation is intensifying when water vapor is feeding into, and CO yield is augmented when flue gas is injected. The maximum H2 plus CO preparation efficiency is 61.3–77.4% and H2 yield is 95.9–135.5%,when pressure, temperature, H2O/P ratio and CO2/P ratio should be controlled in 1 bar, 800–1000 °C, 1.5–3.0 and 0.1–0.5, respectively, meanwhile, CO2 conversion rate is 28.4%.Otherwise, this complex system has a maximum CO2 reduction efficiency 73.6–99.0%, when 1 bar, 800–1000 °C, 0.1–0.2, 0.1–3.0 are adopted. Under the optimum conditions above, CO2 reduction efficiency is 171.1 kg/t for an ironmaking sector with capacity 54,000 tons, hydrogen preparation efficiency is 15.6 kg/t at 800 °C, corresponding coke ratio substitution amount is 460.0 kg/t. Besides, the maximum H2 preparation intensifying factor is 8.3% at 1000 °C and the maximum CO2 emission reduction intensity factor is 91.0%, which increases by 49.6–71.3% comparing to predecessors. Through this researches above, hydrogen-rich carbon recycling complex system has unique advantages for CO2 deep reduction and coke ratio decrease, and has a significant contribution suppling with a new horizon and methodology for low-carbon metallurgical process development in the future.

Suggested Citation

  • Zhang, Huining & Liu, Xueting & Wang, Pufan & Wang, Qiqi & Lu, Liping & Yang, Liang & Jiang, Pingguo & Liang, Yong & Liao, Chunfa, 2024. "Hydrogen-rich carbon recycling complex system establishment and comprehensive evaluation," Applied Energy, Elsevier, vol. 355(C).
    • Handle: RePEc:eee:appene:v:355:y:2024:i:c:s0306261923017117
    DOI: 10.1016/j.apenergy.2023.122347
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923017117
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.122347?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sun, Yongqi & Seetharaman, Seshadri & Liu, Qianyi & Zhang, Zuotai & Liu, Lili & Wang, Xidong, 2016. "Integrated biomass gasification using the waste heat from hot slags: Control of syngas and polluting gas releases," Energy, Elsevier, vol. 114(C), pages 165-176.
    2. Lundgren, J. & Ekbom, T. & Hulteberg, C. & Larsson, M. & Grip, C.-E. & Nilsson, L. & Tunå, P., 2013. "Methanol production from steel-work off-gases and biomass based synthesis gas," Applied Energy, Elsevier, vol. 112(C), pages 431-439.
    3. Alexandra Devlin & Jannik Kossen & Haulwen Goldie-Jones & Aidong Yang, 2023. "Global green hydrogen-based steel opportunities surrounding high quality renewable energy and iron ore deposits," Nature Communications, Nature, vol. 14(1), pages 1-14, December.
    4. Kezia Megagita Gerby Langie & Kyungjae Tak & Changsoo Kim & Hee Won Lee & Kwangho Park & Dongjin Kim & Wonsang Jung & Chan Woo Lee & Hyung-Suk Oh & Dong Ki Lee & Jai Hyun Koh & Byoung Koun Min & Da Hy, 2022. "Toward economical application of carbon capture and utilization technology with near-zero carbon emission," Nature Communications, Nature, vol. 13(1), pages 1-10, December.
    5. Sicong Tian & Jianguo Jiang & Zuotai Zhang & Vasilije Manovic, 2018. "Inherent potential of steelmaking to contribute to decarbonisation targets via industrial carbon capture and storage," Nature Communications, Nature, vol. 9(1), pages 1-8, December.
    6. Zhang, Wei & Zhang, Juhua & Xue, Zhengliang, 2017. "Exergy analyses of the oxygen blast furnace with top gas recycling process," Energy, Elsevier, vol. 121(C), pages 135-146.
    7. Jin, Peng & Jiang, Zeyi & Bao, Cheng & Hao, Shiyu & Zhang, Xinxin, 2017. "The energy consumption and carbon emission of the integrated steel mill with oxygen blast furnace," Resources, Conservation & Recycling, Elsevier, vol. 117(PA), pages 58-65.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Suopajärvi, Hannu & Umeki, Kentaro & Mousa, Elsayed & Hedayati, Ali & Romar, Henrik & Kemppainen, Antti & Wang, Chuan & Phounglamcheik, Aekjuthon & Tuomikoski, Sari & Norberg, Nicklas & Andefors, Alf , 2018. "Use of biomass in integrated steelmaking – Status quo, future needs and comparison to other low-CO2 steel production technologies," Applied Energy, Elsevier, vol. 213(C), pages 384-407.
    2. Zhang, Huining & Dong, Jianping & Wei, Chao & Cao, Caifang & Zhang, Zuotai, 2022. "Future trend of terminal energy conservation in steelmaking plant: Integration of molten slag heat recovery-combustible gas preparation from waste plastics and CO2 emission reduction," Energy, Elsevier, vol. 239(PE).
    3. Wang, Yihan & Wen, Zongguo & Xu, Mao & Kosajan, Vorada, 2024. "The carbon-energy-water nexus of the carbon capture, utilization, and storage technology deployment schemes: A case study in China's cement industry," Applied Energy, Elsevier, vol. 362(C).
    4. Kang, Dongseong & Byun, Jaewon & Han, Jee-hoon, 2023. "Environmental impact analysis of steelmaking off-gases on methanol production," Energy, Elsevier, vol. 277(C).
    5. Shin, Sunkyu & Lee, Jeong-Keun & Lee, In-Beum, 2020. "Development and techno-economic study of methanol production from coke-oven gas blended with Linz Donawitz gas," Energy, Elsevier, vol. 200(C).
    6. Zhang, Hanfei & Wang, Ligang & Pérez-Fortes, Mar & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2020. "Techno-economic optimization of biomass-to-methanol with solid-oxide electrolyzer," Applied Energy, Elsevier, vol. 258(C).
    7. Zetterholm, J. & Ji, X. & Sundelin, B. & Martin, P.M. & Wang, C., 2017. "Dynamic modelling for the hot blast stove," Applied Energy, Elsevier, vol. 185(P2), pages 2142-2150.
    8. Kim, Dongin & Han, Jeehoon, 2020. "Techno-economic and climate impact analysis of carbon utilization process for methanol production from blast furnace gas over Cu/ZnO/Al2O3 catalyst," Energy, Elsevier, vol. 198(C).
    9. Li, Wei & Sun, Wen & Li, Guomin & Cui, Pengfei & Wu, Wen & Jin, Baihui, 2017. "Temporal and spatial heterogeneity of carbon intensity in China's construction industry," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 162-173.
    10. Hu, Mian & Laghari, Mahmood & Cui, Baihui & Xiao, Bo & Zhang, Beiping & Guo, Dabin, 2018. "Catalytic cracking of biomass tar over char supported nickel catalyst," Energy, Elsevier, vol. 145(C), pages 228-237.
    11. Mariyam, Sabah & Shahbaz, Muhammad & Al-Ansari, Tareq & Mackey, Hamish. R & McKay, Gordon, 2022. "A critical review on co-gasification and co-pyrolysis for gas production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    12. McLaughlin, Hope & Littlefield, Anna A. & Menefee, Maia & Kinzer, Austin & Hull, Tobias & Sovacool, Benjamin K. & Bazilian, Morgan D. & Kim, Jinsoo & Griffiths, Steven, 2023. "Carbon capture utilization and storage in review: Sociotechnical implications for a carbon reliant world," Renewable and Sustainable Energy Reviews, Elsevier, vol. 177(C).
    13. Huang, Jintao & Lyu, Sha & Han, He & Wang, Yanjiang & Sun, Haoyang & Su, Jingtao & Liu, Yidong & Min, Yonggang & Sun, Dazhi, 2022. "Enhanced looping biomass/vapour gasification utilizing waste heat from molten copper slags," Energy, Elsevier, vol. 252(C).
    14. Wu, Junjun & Tan, Yu & Li, Peng & Wang, Hong & Zhu, Xun & Liao, Qiang, 2022. "Centrifugal-Granulation-Assisted thermal energy recovery towards low-carbon blast furnace slag treatment: State of the art and future challenges," Applied Energy, Elsevier, vol. 325(C).
    15. Chen, Qianqian & Gu, Yu & Tang, Zhiyong & Wei, Wei & Sun, Yuhan, 2018. "Assessment of low-carbon iron and steel production with CO2 recycling and utilization technologies: A case study in China," Applied Energy, Elsevier, vol. 220(C), pages 192-207.
    16. Li, Yuan & Zhu, Lei, 2014. "Cost of energy saving and CO2 emissions reduction in China’s iron and steel sector," Applied Energy, Elsevier, vol. 130(C), pages 603-616.
    17. Michael Bampaou & Kyriakos Panopoulos & Panos Seferlis & Amaia Sasiain & Stephane Haag & Philipp Wolf-Zoellner & Markus Lehner & Leokadia Rog & Przemyslaw Rompalski & Sebastian Kolb & Nina Kieberger &, 2022. "Economic Evaluation of Renewable Hydrogen Integration into Steelworks for the Production of Methanol and Methane," Energies, MDPI, vol. 15(13), pages 1-26, June.
    18. Halliday, Cameron & Hatton, T. Alan, 2020. "The potential of molten metal oxide sorbents for carbon capture at high temperature: Conceptual design," Applied Energy, Elsevier, vol. 280(C).
    19. Peter Klimek & Maximilian Hess & Markus Gerschberger & Stefan Thurner, 2024. "Circular transformation of the European steel industry renders scrap metal a strategic resource," Papers 2406.12098, arXiv.org.
    20. Uribe-Soto, Wilmar & Portha, Jean-François & Commenge, Jean-Marc & Falk, Laurent, 2017. "A review of thermochemical processes and technologies to use steelworks off-gases," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 809-823.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:355:y:2024:i:c:s0306261923017117. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.