IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v353y2024ipbs0306261923014605.html
   My bibliography  Save this article

Alternative B-site-doped La0.6Sr0.4Co0.2Fe0.8-xMxO3 (M = Ni, Cu, Nb; x = 0, 0.1, 0.2) as innovative cathode material for LT-SOFC with enhanced charge transfer and oxygen ion diffusion

Author

Listed:
  • Jia, Weihua
  • Wang, Yuqi
  • Huang, Jianbing
  • Li, Mengran
  • Xiang, Benlin
  • Wang, Yue
  • Wu, Le
  • Zheng, Lan
  • Ge, Lei

Abstract

Although La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) owns a high level of maturity as a cathode material for intermediate and high-temperature SOFCs, there still exists tremendous potential for it to be employed under an efficient low-temperature working conditions. Since the charge transfer and oxygen ions diffusion act as pivotal obstacles to realizing the operation of LT-SOFCs (below 600 °C), the B-site doping elements (Ni, Cu, Nb) in commercial LSCF are selected using the first-principles calculation. Based on the theoretical findings, the novel Cu-doped La0.6Sr0.4Co0.2Fe0.8-xCuxO3 (LSCFCx, x = 0, 0.1, 0.2) cathode materials are synthesized with exploring the phase structure, valence states of the elements, and thermogravimetric properties. Among different doping elements, Cu doping could facilitate the electrochemical performance of LSCFCx cathode by the enhancement of electrons at B-site and enrichment the of oxygen vacancies. Arising from the inspiring charge transfer and the accelerating oxygen ion transportation, Cu-substitution yields superior activity than other LSCF doping elements. The polarization resistant and activation energy values for LSCFC0.2 cathode attenuates more than 71% and 35% in contrast to the undoped LSCF cathode, respectively. The maximal power density of the anode-supported single cells utilizing LSCFC0.2 cathode outputs 0.594 W∙cm‐2 at 600 °C and promotes over 41% than commercial LSCF at the same condition. These results conclusively point to a practical Cu-doping strategy for the development of highly efficient cathodes for LT-SOFCs.

Suggested Citation

  • Jia, Weihua & Wang, Yuqi & Huang, Jianbing & Li, Mengran & Xiang, Benlin & Wang, Yue & Wu, Le & Zheng, Lan & Ge, Lei, 2024. "Alternative B-site-doped La0.6Sr0.4Co0.2Fe0.8-xMxO3 (M = Ni, Cu, Nb; x = 0, 0.1, 0.2) as innovative cathode material for LT-SOFC with enhanced charge transfer and oxygen ion diffusion," Applied Energy, Elsevier, vol. 353(PB).
    • Handle: RePEc:eee:appene:v:353:y:2024:i:pb:s0306261923014605
    DOI: 10.1016/j.apenergy.2023.122096
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923014605
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.122096?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mei, Shuxue & Lu, Xiaorui & Zhu, Yu & Wang, Shixue, 2021. "Thermodynamic assessment of a system configuration strategy for a cogeneration system combining SOFC, thermoelectric generator, and absorption heat pump," Applied Energy, Elsevier, vol. 302(C).
    2. Qu, Jifa & Wang, Wei & Chen, Yubo & Deng, Xiang & Shao, Zongping, 2016. "Stable direct-methane solid oxide fuel cells with calcium-oxide-modified nickel-based anodes operating at reduced temperatures," Applied Energy, Elsevier, vol. 164(C), pages 563-571.
    3. Cinti, Giovanni & Frattini, Domenico & Jannelli, Elio & Desideri, Umberto & Bidini, Gianni, 2017. "Coupling Solid Oxide Electrolyser (SOE) and ammonia production plant," Applied Energy, Elsevier, vol. 192(C), pages 466-476.
    4. Mengran Li & Mingwen Zhao & Feng Li & Wei Zhou & Vanessa K. Peterson & Xiaoyong Xu & Zongping Shao & Ian Gentle & Zhonghua Zhu, 2017. "A niobium and tantalum co-doped perovskite cathode for solid oxide fuel cells operating below 500 °C," Nature Communications, Nature, vol. 8(1), pages 1-9, April.
    5. Smith, Lucy & Ibn-Mohammed, Taofeeq & Yang, Fan & Reaney, Ian M. & Sinclair, Derek C. & Koh, S.C. Lenny, 2019. "Comparative environmental profile assessments of commercial and novel material structures for solid oxide fuel cells," Applied Energy, Elsevier, vol. 235(C), pages 1300-1313.
    6. Brian C. H. Steele & Angelika Heinzel, 2001. "Materials for fuel-cell technologies," Nature, Nature, vol. 414(6861), pages 345-352, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Vinoth Kumar, R. & Khandale, A.P., 2022. "A review on recent progress and selection of cobalt-based cathode materials for low temperature-solid oxide fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    2. Parnian, Mohammad Javad & Rowshanzamir, Soosan & Gashoul, Fatemeh, 2017. "Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel ," Energy, Elsevier, vol. 125(C), pages 614-628.
    3. Xu, Yuan-wu & Wu, Xiao-long & Zhong, Xiao-bo & Zhao, Dong-qi & Sorrentino, Marco & Jiang, Jianhua & Jiang, Chang & Fu, Xiaowei & Li, Xi, 2021. "Mechanism model-based and data-driven approach for the diagnosis of solid oxide fuel cell stack leakage," Applied Energy, Elsevier, vol. 286(C).
    4. Saurabh Singh & Raghvendra Pandey & Sabrina Presto & Maria Paola Carpanese & Antonio Barbucci & Massimo Viviani & Prabhakar Singh, 2019. "Suitability of Sm 3+ - Substituted SrTiO 3 as Anode Materials for Solid Oxide Fuel Cells: A Correlation between Structural and Electrical Properties," Energies, MDPI, vol. 12(21), pages 1-16, October.
    5. Jine Wu & Chenyi Liao & Tianyu Li & Jing Zhou & Linjuan Zhang & Jian-Qiang Wang & Guohui Li & Xianfeng Li, 2023. "Metal-coordinated polybenzimidazole membranes with preferential K+ transport," Nature Communications, Nature, vol. 14(1), pages 1-12, December.
    6. Roy, Dibyendu & Roy, Sumit & Smallbone, Andrew & Roskilly, Anthony Paul, 2024. "Assessing the techno-economic viability of a trigeneration system integrating ammonia-fuelled solid oxide fuel cell," Applied Energy, Elsevier, vol. 357(C).
    7. Al-Fatesh, Ahmed Sadeq & Hanan atia, & Ibrahim, Ahmed Aidid & Fakeeha, Anis Hamza & Singh, Sunit Kumar & Labhsetwar, Nitin K. & Shaikh, Hamid & Qasim, Shamsudeen O., 2019. "CO2 reforming of CH4: Effect of Gd as promoter for Ni supported over MCM-41 as catalyst," Renewable Energy, Elsevier, vol. 140(C), pages 658-667.
    8. Xia, Zhangxun & Sun, Ruili & Jing, Fenning & Wang, Suli & Sun, Hai & Sun, Gongquan, 2018. "Modeling and optimization of Scaffold-like macroporous electrodes for highly efficient direct methanol fuel cells," Applied Energy, Elsevier, vol. 221(C), pages 239-248.
    9. Ortiz-Vitoriano, N. & Bernuy-López, C. & Ruiz de Larramendi, I. & Knibbe, R. & Thydén, K. & Hauch, A. & Holtappels, P. & Rojo, T., 2013. "Optimizing solid oxide fuel cell cathode processing route for intermediate temperature operation," Applied Energy, Elsevier, vol. 104(C), pages 984-991.
    10. Fiammetta Rita Bianchi & Arianna Baldinelli & Linda Barelli & Giovanni Cinti & Emilio Audasso & Barbara Bosio, 2020. "Multiscale Modeling for Reversible Solid Oxide Cell Operation," Energies, MDPI, vol. 13(19), pages 1-16, September.
    11. Xing, Xuetao & Lin, Jin & Song, Yonghua & Hu, Qiang & Zhou, You & Mu, Shujun, 2018. "Optimization of hydrogen yield of a high-temperature electrolysis system with coordinated temperature and feed factors at various loading conditions: A model-based study," Applied Energy, Elsevier, vol. 232(C), pages 368-385.
    12. Muhammad Aziz & Agung Tri Wijayanta & Asep Bayu Dani Nandiyanto, 2020. "Ammonia as Effective Hydrogen Storage: A Review on Production, Storage and Utilization," Energies, MDPI, vol. 13(12), pages 1-25, June.
    13. Zhang, Hanfei & Wang, Ligang & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2020. "Techno-economic comparison of green ammonia production processes," Applied Energy, Elsevier, vol. 259(C).
    14. Carton, J.G. & Olabi, A.G., 2017. "Three-dimensional proton exchange membrane fuel cell model: Comparison of double channel and open pore cellular foam flow plates," Energy, Elsevier, vol. 136(C), pages 185-195.
    15. Zheng, Nan & Zhang, Hanfei & Duan, Liqiang & Wang, Qiushi & Bischi, Aldo & Desideri, Umberto, 2023. "Techno-economic analysis of a novel solar-driven PEMEC-SOFC-based multi-generation system coupled parabolic trough photovoltaic thermal collector and thermal energy storage," Applied Energy, Elsevier, vol. 331(C).
    16. Yusung Kim & Sanghoon Lee & Gu Young Cho & Wonjong Yu & Yeageun Lee & Ikwhang Chang & Jong Dae Baek & Suk Won Cha, 2020. "Investigation of Reducing In-Plane Resistance of Nickel Oxide-Samaria-Doped Ceria Anode in Thin-Film Solid Oxide Fuel Cells," Energies, MDPI, vol. 13(8), pages 1-8, April.
    17. Fausto Cavallaro & Edmundas Kazimieras Zavadskas & Saulius Raslanas, 2016. "Evaluation of Combined Heat and Power (CHP) Systems Using Fuzzy Shannon Entropy and Fuzzy TOPSIS," Sustainability, MDPI, vol. 8(6), pages 1-21, June.
    18. Kalmula, Babita & Kondapuram, Vijaya Raghavan, 2015. "Fuel processor – fuel cell integration: Systemic issues and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 409-418.
    19. Lukman Ahmed Omeiza & Abdalla M. Abdalla & Bo Wei & Anitha Dhanasekaran & Yathavan Subramanian & Shammya Afroze & Md Sumon Reza & Saifullah Abu Bakar & Abul Kalam Azad, 2023. "Nanostructured Electrocatalysts for Advanced Applications in Fuel Cells," Energies, MDPI, vol. 16(4), pages 1-22, February.
    20. Bargiacchi, Eleonora & Antonelli, Marco & Desideri, Umberto, 2019. "A comparative assessment of Power-to-Fuel production pathways," Energy, Elsevier, vol. 183(C), pages 1253-1265.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:353:y:2024:i:pb:s0306261923014605. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.