IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v267y2020ics0306261920303901.html
   My bibliography  Save this article

Simulation of elevated temperature combined water gas shift and solid sorbent CO2 capture for pre-combustion applications using computational fluid dynamics

Author

Listed:
  • Chen, Qin
  • Rosner, Fabian
  • Rao, Ashok
  • Samuelsen, Scott
  • Bonnema, Michael
  • Jayaraman, Ambal
  • Alptekin, Gokhan

Abstract

Water gas shift reaction combined with CO2 adsorption is a novel promising technology for pre-combustion CO2 capture in IGCC applications. By combining the two processes in an IGCC, reduction in plant capital cost (by eliminating the separate shift reactors) and in heat rate (by reducing their steam injection rates) may be realized. CFD modeling was employed to predict the CO2 adsorption, desorption and shift reaction rates, CO2 loading, CO2 breakthrough curve and temperature distribution within the reactor. The model was validated against experimental data. It was shown that significant increase in temperature occurs near the bottom region of the combined catalyst and sorbent mixed zone because majority of the reaction occurs over a small region where the feed syngas contacts the WGS catalyst. Injection of liquid water between beds is investigated for temperature control. CFD simulation model of the combined WGS and CO2 capture would be useful in reactor design, developing thermal management strategies to avoid the high temperature zones, and developing IGCC overall plant design as well as in assessing the plant thermo-economics.

Suggested Citation

  • Chen, Qin & Rosner, Fabian & Rao, Ashok & Samuelsen, Scott & Bonnema, Michael & Jayaraman, Ambal & Alptekin, Gokhan, 2020. "Simulation of elevated temperature combined water gas shift and solid sorbent CO2 capture for pre-combustion applications using computational fluid dynamics," Applied Energy, Elsevier, vol. 267(C).
  • Handle: RePEc:eee:appene:v:267:y:2020:i:c:s0306261920303901
    DOI: 10.1016/j.apenergy.2020.114878
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920303901
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2020.114878?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Yixuan & Ahn, Hyungwoong, 2019. "The implications of choice between sour and sweet shift on process design and operation of an IGCC power plant integrated with a dual-stage selexol unit," Energy, Elsevier, vol. 173(C), pages 1273-1284.
    2. Chen, Qin & Rosner, Fabian & Rao, Ashok & Samuelsen, Scott & Jayaraman, Ambal & Alptekin, Gokhan, 2019. "Simulation of elevated temperature solid sorbent CO2 capture for pre-combustion applications using computational fluid dynamics," Applied Energy, Elsevier, vol. 237(C), pages 314-325.
    3. Chen, Qin & Rao, Ashok & Samuelsen, Scott, 2015. "Coproduction of transportation fuels in advanced IGCCs via coal and biomass mixtures," Applied Energy, Elsevier, vol. 157(C), pages 851-860.
    4. Sasaki, Takashi & Suzuki, Tomoko & Akasaka, Yasufumi & Takaoka, Masaki, 2017. "Generation efficiency improvement of IGCC with CO2 capture by the application of the low temperature reactive shift catalyst," Energy, Elsevier, vol. 118(C), pages 60-67.
    5. Barelli, L. & Bidini, G. & Gallorini, F. & Servili, S., 2008. "Hydrogen production through sorption-enhanced steam methane reforming and membrane technology: A review," Energy, Elsevier, vol. 33(4), pages 554-570.
    6. Chen, Qin & Rao, Ashok & Samuelsen, Scott, 2014. "H2 coproduction in IGCC with CCS via coal and biomass mixture using advanced technologies," Applied Energy, Elsevier, vol. 118(C), pages 258-270.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rosner, Fabian & Chen, Qin & Rao, Ashok & Samuelsen, Scott, 2020. "Thermo-economic analyses of isothermal water gas shift reactor integrations into IGCC power plant," Applied Energy, Elsevier, vol. 277(C).
    2. Rosner, Fabian & Chen, Qin & Rao, Ashok & Samuelsen, Scott & Jayaraman, Ambal & Alptekin, Gokhan, 2019. "Thermo-economic analyses of IGCC power plants employing warm gas CO2 separation technology," Energy, Elsevier, vol. 185(C), pages 541-553.
    3. Bassani, Andrea & Pirola, Carlo & Maggio, Enrico & Pettinau, Alberto & Frau, Caterina & Bozzano, Giulia & Pierucci, Sauro & Ranzi, Eliseo & Manenti, Flavio, 2016. "Acid Gas to Syngas (AG2S™) technology applied to solid fuel gasification: Cutting H2S and CO2 emissions by improving syngas production," Applied Energy, Elsevier, vol. 184(C), pages 1284-1291.
    4. Chen, Qin & Rosner, Fabian & Rao, Ashok & Samuelsen, Scott & Jayaraman, Ambal & Alptekin, Gokhan, 2019. "Simulation of elevated temperature solid sorbent CO2 capture for pre-combustion applications using computational fluid dynamics," Applied Energy, Elsevier, vol. 237(C), pages 314-325.
    5. Rahimpour, M.R. & Mirvakili, A. & Paymooni, K., 2011. "A novel water perm-selective membrane dual-type reactor concept for Fischer–Tropsch synthesis of GTL (gas to liquid) technology," Energy, Elsevier, vol. 36(2), pages 1223-1235.
    6. Barelli, L. & Ottaviano, A., 2014. "Solid oxide fuel cell technology coupled with methane dry reforming: A viable option for high efficiency plant with reduced CO2 emissions," Energy, Elsevier, vol. 71(C), pages 118-129.
    7. Ding, Haoran & Tong, Sirui & Qi, Zhifu & Liu, Fei & Sun, Shien & Han, Long, 2023. "Syngas production from chemical-looping steam methane reforming: The effect of channel geometry on BaCoO3/CeO2 monolithic oxygen carriers," Energy, Elsevier, vol. 263(PE).
    8. Abdollahzadeh, M. & Ribeirinha, P. & Boaventura, M. & Mendes, A., 2018. "Three-dimensional modeling of PEMFC with contaminated anode fuel," Energy, Elsevier, vol. 152(C), pages 939-959.
    9. Prabu, V. & Geeta, K., 2015. "CO2 enhanced in-situ oxy-coal gasification based carbon-neutral conventional power generating systems," Energy, Elsevier, vol. 84(C), pages 672-683.
    10. Pashchenko, Dmitry, 2023. "Hydrogen-rich gas as a fuel for the gas turbines: A pathway to lower CO2 emission," Renewable and Sustainable Energy Reviews, Elsevier, vol. 173(C).
    11. Sanusi, Yinka S. & Mokheimer, Esmail M.A., 2019. "Thermo-economic optimization of hydrogen production in a membrane-SMR integrated to ITM-oxy-combustion plant using genetic algorithm," Applied Energy, Elsevier, vol. 235(C), pages 164-176.
    12. Po-Chun Han & Chia-Hui Chuang & Shang-Wei Lin & Xiangmei Xiang & Zaoming Wang & Mako Kuzumoto & Shun Tokuda & Tomoki Tateishi & Alexandre Legrand & Min Ying Tsang & Hsiao-Ching Yang & Kevin C.-W. Wu &, 2024. "Phase-transformable metal-organic polyhedra for membrane processing and switchable gas separation," Nature Communications, Nature, vol. 15(1), pages 1-12, December.
    13. Dang, Chengxiong & Xia, Huanhuan & Yuan, Shuting & Wei, Xingchuan & Cai, Weiquan, 2022. "Green hydrogen production from sorption-enhanced steam reforming of biogas over a Pd/Ni–CaO-mayenite multifunctional catalyst," Renewable Energy, Elsevier, vol. 201(P1), pages 314-322.
    14. Tamura, Masato & Gotou, Takahiro & Ishii, Hiroki & Riechelmann, Dirk, 2020. "Experimental investigation of ammonia combustion in a bench scale 1.2 MW-thermal pulverised coal firing furnace," Applied Energy, Elsevier, vol. 277(C).
    15. Hafizi, A. & Rahimpour, M.R. & Hassanajili, Sh., 2016. "Hydrogen production via chemical looping steam methane reforming process: Effect of cerium and calcium promoters on the performance of Fe2O3/Al2O3 oxygen carrier," Applied Energy, Elsevier, vol. 165(C), pages 685-694.
    16. Sirui Tong & Bin Miao & Lan Zhang & Siew Hwa Chan, 2022. "Decarbonizing Natural Gas: A Review of Catalytic Decomposition and Carbon Formation Mechanisms," Energies, MDPI, vol. 15(7), pages 1-30, April.
    17. Perejón, Antonio & Romeo, Luis M. & Lara, Yolanda & Lisbona, Pilar & Martínez, Ana & Valverde, Jose Manuel, 2016. "The Calcium-Looping technology for CO2 capture: On the important roles of energy integration and sorbent behavior," Applied Energy, Elsevier, vol. 162(C), pages 787-807.
    18. Moon, Dong-Kyu & Lee, Dong-Geun & Lee, Chang-Ha, 2016. "H2 pressure swing adsorption for high pressure syngas from an integrated gasification combined cycle with a carbon capture process," Applied Energy, Elsevier, vol. 183(C), pages 760-774.
    19. Hong, Sung Kook & Dong, Sang Keun & Han, Jeong Ok & Lee, Joong Seong & Lee, Young Chul, 2013. "Numerical study of effect of operating and design parameters for design of steam reforming reactor," Energy, Elsevier, vol. 61(C), pages 410-418.
    20. Tang, Xin-Yuan & Yang, Wei-Wei & Ma, Xu & Cao, Xiangkun Elvis, 2023. "An integrated modeling method for membrane reactors and optimization study of operating conditions," Energy, Elsevier, vol. 268(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:267:y:2020:i:c:s0306261920303901. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.