IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v265y2020ics030626192030307x.html
   My bibliography  Save this article

Investigations of autoignition and propagation of supersonic ethylene flames stabilized by a cavity

Author

Listed:
  • Huang, Zhiwei
  • Zhang, Huangwei

Abstract

Two analysis methods for time scale and energy balance relevant to flame ignition and stabilization in cavity-stabilized flames are developed. The interaction time of hot product in the recirculation zone of the cavity with the surrounding unburned mixture and the reaction induction time of the mixture are estimated in the time scale method. The energy release from chemical reactions and the energy loss due to species exchange in the recirculation zone are included in the energy balance method. The autoignition and propagation of supersonic ethylene flames in a model supersonic combustor with a cavity is investigated first using highly resolved large eddy simulation. The evolutions of the two time scales are then calculated in the ignition process of the supersonic ethylene flames. It is found that the time scale theory is well valid in the flame propagation and stabilization stages. The rates of energy generation and loss are then analyzed in the cavity. It is found that initially the local energy generation rate is relatively small, resulting in slow net energy accumulation in the cavity. Then the energy generation increases due to the intermittent flame propagation in the cavity, whereas the energy loss oscillates consistently since the burned gas leaves the cavity. Also, energy generation and loss are generally balanced in the cavity and all tend to zero after the flame is globally stabilized. The two methods present the characteristic time scales and energy balancing during the transient ignition process for the first time.

Suggested Citation

  • Huang, Zhiwei & Zhang, Huangwei, 2020. "Investigations of autoignition and propagation of supersonic ethylene flames stabilized by a cavity," Applied Energy, Elsevier, vol. 265(C).
  • Handle: RePEc:eee:appene:v:265:y:2020:i:c:s030626192030307x
    DOI: 10.1016/j.apenergy.2020.114795
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626192030307X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2020.114795?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bao, Xiuchao & Sahu, Amrit & Jiang, Yizhaou & Badawy, Tawfik & Xu, Hongming, 2019. "Flame kernel evolution and shock wave propagation with laser ignition in ethanol-air mixtures," Applied Energy, Elsevier, vol. 233, pages 86-98.
    2. Chen, Lin & Zhang, Ren & Pan, Jiaying & Wei, Haiqiao, 2020. "Effects of partitioned fuel distribution on auto-ignition and knocking under spark assisted compression ignition conditions," Applied Energy, Elsevier, vol. 260(C).
    3. Cai, Zun & Zhu, Jiajian & Sun, Mingbo & Wang, Zhenguo & Bai, Xue-Song, 2018. "Ignition processes and modes excited by laser-induced plasma in a cavity-based supersonic combustor," Applied Energy, Elsevier, vol. 228(C), pages 1777-1782.
    4. Wadekar, S. & Janas, P. & Oevermann, M., 2019. "Large-eddy simulation study of combustion cyclic variation in a lean-burn spark ignition engine," Applied Energy, Elsevier, vol. 255(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Singh, Awanish Pratap & Padhi, Upasana P. & Joarder, Ratan & Roy, Arnab, 2019. "Spatio-temporal effect of the breakdown zone in the laser-initiated ignition of atomized ethyl alcohol-air mixture," Applied Energy, Elsevier, vol. 247(C), pages 140-154.
    2. Giovanni Cecere & Adrian Irimescu & Simona Silvia Merola & Luciano Rolando & Federico Millo, 2022. "Lean Burn Flame Kernel Characterization for Different Spark Plug Designs and Orientations in an Optical GDI Engine," Energies, MDPI, vol. 15(9), pages 1-17, May.
    3. Gong, Changming & Yi, Lin & Zhang, Zilei & Sun, Jingzhen & Liu, Fenghua, 2020. "Assessment of ultra-lean burn characteristics for a stratified-charge direct-injection spark-ignition methanol engine under different high compression ratios," Applied Energy, Elsevier, vol. 261(C).
    4. d'Adamo, A. & Iacovano, C. & Fontanesi, S., 2020. "Large-Eddy simulation of lean and ultra-lean combustion using advanced ignition modelling in a transparent combustion chamber engine," Applied Energy, Elsevier, vol. 280(C).
    5. Junjie Zhang & Erjiang Hu & Qunfei Gao & Geyuan Yin & Zuohua Huang, 2021. "Shock Wave Propagation and Flame Kernel Morphology in Laser-Induced Plasma Ignition of CH 4 /O 2 /N 2 Mixture," Energies, MDPI, vol. 14(23), pages 1-17, November.
    6. Schröder, Lukas & Hillenbrand, Thomas & Brüggemann, Dieter, 2024. "Evaluation of the combustion process of directly injected methane in a rapid compression machine with a laser-based ignition system and an electrical ignition system," Energy, Elsevier, vol. 289(C).
    7. Yixiang Yuan & Qinghua Zeng & Jun Yao & Yongjun Zhang & Mengmeng Zhao & Lu Zhao, 2021. "Improving Blowout Performance of the Conical Swirler Combustor by Employing Two Parts of Fuel at Low Operating Condition," Energies, MDPI, vol. 14(6), pages 1-11, March.
    8. Wang, Yong & Ma, Yinjie & Xie, Deyi & Yu, Zhenhuan & E, Jiaqiang, 2021. "Numerical study on the influence of gasoline properties and thermodynamic conditions on premixed laminar flame velocity at multiple conditions," Energy, Elsevier, vol. 233(C).
    9. Wang, Xiaoling & Gao, Yuan & Zhang, Shuai & Sun, Hao & Li, Jie & Shao, Tao, 2019. "Nanosecond pulsed plasma assisted dry reforming of CH4: The effect of plasma operating parameters," Applied Energy, Elsevier, vol. 243(C), pages 132-144.
    10. Rami Y. Dahham & Haiqiao Wei & Jiaying Pan, 2022. "Improving Thermal Efficiency of Internal Combustion Engines: Recent Progress and Remaining Challenges," Energies, MDPI, vol. 15(17), pages 1-60, August.
    11. Fan, Qinhao & Liu, Shang & Qi, Yunliang & Cai, Kaiyuan & Wang, Zhi, 2021. "Investigation into ethanol effects on combustion and particle number emissions in a spark-ignition to compression-ignition (SICI) engine," Energy, Elsevier, vol. 233(C).
    12. Sheng, Haoqiang & Ji, Yuan & Huang, Xiaobin & Zhao, Zhengchuang & Hu, Wenbin & Chen, Junming & Liu, Hong, 2022. "A free radical relay combustion approach to scramjet ignition at a low Mach number," Energy, Elsevier, vol. 247(C).
    13. Feng, Rong & Zhu, Jiajian & Wang, Zhenguo & Sun, Mingbo & Wang, Hongbo & Cai, Zun & An, Bin & Li, Liang, 2021. "Ignition modes of a cavity-based scramjet combustor by a gliding arc plasma," Energy, Elsevier, vol. 214(C).
    14. Chen, Jian & Wang, Zhenghui & Zhang, Yanni & Li, Yang & Tam, Wai Cheong & Kong, Depeng & Deng, Jun, 2024. "New insights into the ignition characteristics of liquid fuels on hot surfaces based on TG-FTIR," Applied Energy, Elsevier, vol. 360(C).
    15. Zuo, Jingying & Cui, Naigang & Zhang, Silong & Wei, Jianfei & Li, Xin & Bao, Wen, 2023. "Parametric analysis on combustion characteristics of hydrocarbon fueled parallel wall-jet inside a supersonic combustor," Energy, Elsevier, vol. 282(C).
    16. Li, Chaolong & Xia, Zhixun & Ma, Likun & Chen, Binbin & Feng, Yunchao & Zhang, Jiarui & Duan, Yifan, 2023. "Performance analysis on the specific impulse and specific thrust of scramjet with a quasi-one-dimensional model," Energy, Elsevier, vol. 267(C).
    17. Miao, Junjie & Fan, Yuxin & Wu, Weiqiu & Zhao, Shilong, 2021. "Effect of air-assistant on ignition and flame-holding characteristics in a cavity-strut based combustor," Applied Energy, Elsevier, vol. 283(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:265:y:2020:i:c:s030626192030307x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.