IDEAS home Printed from https://ideas.repec.org/a/spr/joinma/v34y2023i3d10.1007_s10845-021-01845-5.html
   My bibliography  Save this article

Data-driven models for predictions of geometric characteristics of bead fabricated by selective laser melting

Author

Listed:
  • Thai Le-Hong

    (Thu Dau Mot University
    Institut Polytechnique de Paris)

  • Pai Chen Lin

    (National Chung-Cheng University
    National Chung-Cheng University)

  • Jian-Zhong Chen

    (National Chung-Cheng University
    National Chung-Cheng University)

  • Thinh Duc Quy Pham

    (Thu Dau Mot University
    Université de Liège)

  • Xuan Tran

    (Thu Dau Mot University)

Abstract

In this paper, the effects of two key process parameters of the selective laser melting process, namely laser power and scanning speed, on the single-track morphologies and the bead characteristics, especially the depth-to-width D/W and height-to-width H/W ratios, were investigated using both experimental and Machine Learning (ML) approaches. A total of 840 single tracks were fabricated with several combinations of laser power and scanning speed levels. Surface morphologies of the single tracks and bead profiles were thoroughly investigated, providing a track-type map and the evolutions of the bead characteristics as a function of laser power and scanning speed. The results indicate neither severe balling nor keyholing effect for all combinations of laser power and scanning speed. Besides, simple relationships cannot accurately describe the evolutions of the D/W and H/W ratios as a function of laser power and scanning speed. Two Machine Learning-based regression models, Random Forest and Artificial Neural Network, were chosen to estimate the D/W and H/W ratios using laser power and scanning speed. The Bayesian optimization algorithm was employed to optimize the model hyperparameter selection. Both Machine Learning-based models appear to be able to predict reasonably well the two aspect ratios, D/W and H/W, with an overall R2 value reaching about 90%, evaluated on the cross-validation dataset after a few seconds of training time, respectively.

Suggested Citation

  • Thai Le-Hong & Pai Chen Lin & Jian-Zhong Chen & Thinh Duc Quy Pham & Xuan Tran, 2023. "Data-driven models for predictions of geometric characteristics of bead fabricated by selective laser melting," Journal of Intelligent Manufacturing, Springer, vol. 34(3), pages 1241-1257, March.
    • Handle: RePEc:spr:joinma:v:34:y:2023:i:3:d:10.1007_s10845-021-01845-5
    DOI: 10.1007/s10845-021-01845-5
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10845-021-01845-5
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s10845-021-01845-5?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Biranchi Panda & K. Shankhwar & Akhil Garg & M. M. Savalani, 2019. "Evaluation of genetic programming-based models for simulating bead dimensions in wire and arc additive manufacturing," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 809-820, February.
    2. Mojtaba Khanzadeh & Sudipta Chowdhury & Mark A. Tschopp & Haley R. Doude & Mohammad Marufuzzaman & Linkan Bian, 2019. "In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes," IISE Transactions, Taylor & Francis Journals, vol. 51(5), pages 437-455, May.
    3. A. Garg & Jasmine Siu Lee Lam & M. M. Savalani, 2018. "Laser power based surface characteristics models for 3-D printing process," Journal of Intelligent Manufacturing, Springer, vol. 29(6), pages 1191-1202, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hong Seok Park & Dinh Son Nguyen & Thai Le-Hong & Xuan Tran, 2022. "Machine learning-based optimization of process parameters in selective laser melting for biomedical applications," Journal of Intelligent Manufacturing, Springer, vol. 33(6), pages 1843-1858, August.
    2. Konstantinos S. Boulas & Georgios D. Dounias & Chrissoleon T. Papadopoulos, 2023. "A hybrid evolutionary algorithm approach for estimating the throughput of short reliable approximately balanced production lines," Journal of Intelligent Manufacturing, Springer, vol. 34(2), pages 823-852, February.
    3. Jyothi Padmaja Koduru & T. Vijay Kumar & Kedar Mallik Mantrala, 2024. "A review of wire and arc additive manufacturing using different property characterization, challenges and future trends," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 15(9), pages 4563-4581, September.
    4. Zhangyue Shi & Abdullah Al Mamun & Chen Kan & Wenmeng Tian & Chenang Liu, 2023. "An LSTM-autoencoder based online side channel monitoring approach for cyber-physical attack detection in additive manufacturing," Journal of Intelligent Manufacturing, Springer, vol. 34(4), pages 1815-1831, April.
    5. Hongjian Wu & Shaowu Liu & Xinliang Xie & Yicha Zhang & Hanlin Liao & Sihao Deng, 2022. "A framework for a knowledge based cold spray repairing system," Journal of Intelligent Manufacturing, Springer, vol. 33(6), pages 1639-1647, August.
    6. Yingjie Zhang & Wentao Yan, 2023. "Applications of machine learning in metal powder-bed fusion in-process monitoring and control: status and challenges," Journal of Intelligent Manufacturing, Springer, vol. 34(6), pages 2557-2580, August.
    7. Zeqi Hu & Xunpeng Qin & Yifeng Li & Jiuxin Yuan & Qiang Wu, 2020. "Multi-bead overlapping model with varying cross-section profile for robotic GMAW-based additive manufacturing," Journal of Intelligent Manufacturing, Springer, vol. 31(5), pages 1133-1147, June.
    8. Ohyung Kwon & Hyung Giun Kim & Min Ji Ham & Wonrae Kim & Gun-Hee Kim & Jae-Hyung Cho & Nam Il Kim & Kangil Kim, 2020. "A deep neural network for classification of melt-pool images in metal additive manufacturing," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 375-386, February.
    9. A. Chabot & N. Laroche & E. Carcreff & M. Rauch & J.-Y. Hascoët, 2020. "Towards defect monitoring for metallic additive manufacturing components using phased array ultrasonic testing," Journal of Intelligent Manufacturing, Springer, vol. 31(5), pages 1191-1201, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:joinma:v:34:y:2023:i:3:d:10.1007_s10845-021-01845-5. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.