IDEAS home Printed from https://ideas.repec.org/a/spr/ijsaem/v13y2022i5d10.1007_s13198-022-01624-2.html
   My bibliography  Save this article

Examining interaction among supplier selection strategies in an outsourcing environment using ISM and fuzzy logic approach

Author

Listed:
  • Rajiv Kumar Sharma

    (National Institute of Technology)

Abstract

Supplier selection in an outsourcing environment is a challenging task as it depends upon various dimensions. To this effect, the study presents a hybrid approach in which in the first phase, various supplier selection dimensions are identified and the structural relationship among them is modelled by applying interpretive structural modelling (ISM) approach. In phase two, the driver-dependence power of various dimensions is analysed using the MICMAC approach. From the results, it is observed that owing to high dependence power dimensions “Cost,” “Quality”, and “Service” dimensions are important from the customer’s point of view for supplier selection. So, in order to help the managers to address the risk associated with these dimensions, qualitative analysis based on fuzzy set theory has been carried out by considering three potential suppliers. The simulation experiments conducted with different combinations of “Cost,” “Quality”, and “Service” dimensions show that the supplier selection process is a tedious task and may vary with the organizational needs. The approach proposed in the study can be adopted by the supply chain professionals to address supplier selection problems.

Suggested Citation

  • Rajiv Kumar Sharma, 2022. "Examining interaction among supplier selection strategies in an outsourcing environment using ISM and fuzzy logic approach," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(5), pages 2175-2194, October.
    • Handle: RePEc:spr:ijsaem:v:13:y:2022:i:5:d:10.1007_s13198-022-01624-2
    DOI: 10.1007/s13198-022-01624-2
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s13198-022-01624-2
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s13198-022-01624-2?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chan, Felix T.S. & Kumar, Niraj, 2007. "Global supplier development considering risk factors using fuzzy extended AHP-based approach," Omega, Elsevier, vol. 35(4), pages 417-431, August.
    2. Srinivasan, Mahesh & Mukherjee, Debmalya & Gaur, Ajai S., 2011. "Buyer-supplier partnership quality and supply chain performance: Moderating role of risks, and environmental uncertainty," European Management Journal, Elsevier, vol. 29(4), pages 260-271, August.
    3. Ghodsypour, S. H. & O'Brien, C., 1998. "A decision support system for supplier selection using an integrated analytic hierarchy process and linear programming," International Journal of Production Economics, Elsevier, vol. 56(1), pages 199-212, September.
    4. Arpan Kumar Kar & Ashis K. Pani, 2014. "Exploring the importance of different supplier selection criteria," Management Research Review, Emerald Group Publishing Limited, vol. 37(1), pages 89-105, January.
    5. Zeki Ayağ & Funda Samanlioglu, 2016. "An intelligent approach to supplier evaluation in automotive sector," Journal of Intelligent Manufacturing, Springer, vol. 27(4), pages 889-903, August.
    6. Paranitharan Kannusamy Panneer Selvam & Ramesh Babu Thangavelu, 2019. "The IMBES model for achieving excellence in manufacturing industry: an interpretive structural modeling approach," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(4), pages 602-622, August.
    7. Rahul Sindhwani & Vasdev Malhotra, 2017. "Modelling and analysis of agile manufacturing system by ISM and MICMAC analysis," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(2), pages 253-263, June.
    8. Pfohl, Hans-Christian & Gallus, Philipp & Thomas, David, 2011. "Interpretive structural modeling of supply chain risks," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 55230, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    9. Guo, Cong & Li, Xueping, 2014. "A multi-echelon inventory system with supplier selection and order allocation under stochastic demand," International Journal of Production Economics, Elsevier, vol. 151(C), pages 37-47.
    10. D. Laurie Hughes & Nripendra P. Rana & Yogesh K. Dwivedi, 2020. "Elucidation of IS project success factors: an interpretive structural modelling approach," Annals of Operations Research, Springer, vol. 285(1), pages 35-66, February.
    11. A. Azadeh & R. Siadatian & M. Rezaei-Malek & F. Rouhollah, 2017. "Optimization of supplier selection problem by combined customer trust and resilience engineering under uncertainty," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(2), pages 1553-1566, November.
    12. Lennart Söderberg & Lars Bengtsson & Matti Kaulio, 2017. "A model for outsourcing and governing of maintenance within the process industry," Operations Management Research, Springer, vol. 10(1), pages 20-32, June.
    13. Santosh B. Rane & Milind Shrikant Kirkire, 2017. "Interpretive structural modelling of risk sources in medical device development process," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(1), pages 451-464, January.
    14. Ghodsypour, S. H. & O'Brien, C., 2001. "The total cost of logistics in supplier selection, under conditions of multiple sourcing, multiple criteria and capacity constraint," International Journal of Production Economics, Elsevier, vol. 73(1), pages 15-27, August.
    15. Adeinat, Hamza & Ventura, José A., 2015. "Determining the retailer's replenishment policy considering multiple capacitated suppliers and price-sensitive demand," European Journal of Operational Research, Elsevier, vol. 247(1), pages 83-92.
    16. Morteza Yazdani & Sarfaraz Hashemkhani Zolfani & Edmundas Kazimieras Zavadskas, 2016. "New integration of MCDM methods and QFD in the selection of green suppliers," Journal of Business Economics and Management, Taylor & Francis Journals, vol. 17(6), pages 1097-1113, November.
    17. Simon Li & Wei Zeng, 2016. "Risk analysis for the supplier selection problem using failure modes and effects analysis (FMEA)," Journal of Intelligent Manufacturing, Springer, vol. 27(6), pages 1309-1321, December.
    18. Aida Rezaei & Amir Aghsami & Masoud Rabbani, 2021. "Supplier selection and order allocation model with disruption and environmental risks in centralized supply chain," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(6), pages 1036-1072, December.
    19. Pfohl, Hans-Christian & Köhler, Holger & Thomas, David, 2010. "State of the art in supply chain risk management research. Empirical and conceptual findings and a roadmap for the implementation in practice," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 41981, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mohammed, Ahmed & Lopes de Sousa Jabbour, Ana Beatriz & Koh, Lenny & Hubbard, Nicolas & Chiappetta Jabbour, Charbel Jose & Al Ahmed, Teejan, 2022. "The sourcing decision-making process in the era of digitalization: A new quantitative methodology," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 168(C).
    2. Hannan Amoozad Mahdiraji & Fatemeh Yaftiyan & Aliasghar Abbasi-Kamardi & Vahid Jafari-Sadeghi & Jean-Michel Sahut & Leo-Paul Dana, 2023. "A synthesis of boundary conditions with adopting digital platforms in SMEs: an intuitionistic multi-layer decision-making framework," The Journal of Technology Transfer, Springer, vol. 48(5), pages 1723-1751, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Aly Owida & P.J. Byrne & Cathal Heavey & Paul Blake & Khaled S. El-Kilany, 2016. "A simulation based continuous improvement approach for manufacturing based field repair service contracting," International Journal of Production Research, Taylor & Francis Journals, vol. 54(21), pages 6458-6477, November.
    2. Ventura, José A. & Bunn, Kevin A. & Venegas, Bárbara B. & Duan, Lisha, 2021. "A coordination mechanism for supplier selection and order quantity allocation with price-sensitive demand and finite production rates," International Journal of Production Economics, Elsevier, vol. 233(C).
    3. Hsu, C.-H. & Wang, Fu-Kwun & Tzeng, Gwo-Hshiung, 2012. "The best vendor selection for conducting the recycled material based on a hybrid MCDM model combining DANP with VIKOR," Resources, Conservation & Recycling, Elsevier, vol. 66(C), pages 95-111.
    4. Mukherjee, Krishnendu & Sarkar, Bijon & Bhattacharyya, Ardhendu, 2012. "Supplier selection by F-compromise method: a case study of cement industry of NE India," MPRA Paper 57786, University Library of Munich, Germany, revised 2013.
    5. Faiza Hamdi & Ahmed Ghorbel & Faouzi Masmoudi & Lionel Dupont, 2018. "Optimization of a supply portfolio in the context of supply chain risk management: literature review," Journal of Intelligent Manufacturing, Springer, vol. 29(4), pages 763-788, April.
    6. Lin, Rong-Ho, 2012. "An integrated model for supplier selection under a fuzzy situation," International Journal of Production Economics, Elsevier, vol. 138(1), pages 55-61.
    7. Pınar Kaya Samut, 2017. "Integrated FANP-f-MIGP model for supplier selection in the renewable energy sector," Journal of Business Economics and Management, Taylor & Francis Journals, vol. 18(3), pages 427-450, May.
    8. Ehsan Afshar Bakeshlou & Alireza Arshadi Khamseh & Mohammad Ali Goudarzian Asl & Javad Sadeghi & Mostafa Abbaszadeh, 2017. "Evaluating a green supplier selection problem using a hybrid MODM algorithm," Journal of Intelligent Manufacturing, Springer, vol. 28(4), pages 913-927, April.
    9. Mubarik, Muhammad Shujaat & Kazmi, Syed Hasnain Alam & Zaman, Syed Imran, 2021. "Application of gray DEMATEL-ANP in green-strategic sourcing," Technology in Society, Elsevier, vol. 64(C).
    10. Alireza Eydi & Leyla Fazli, 2016. "A Multi-Period Multiple Objective Uncertain Programming Model to Allocate Order for Supplier Selection Problem," Asia-Pacific Journal of Operational Research (APJOR), World Scientific Publishing Co. Pte. Ltd., vol. 33(06), pages 1-40, December.
    11. Mohammed, Ahmed & Harris, Irina & Govindan, Kannan, 2019. "A hybrid MCDM-FMOO approach for sustainable supplier selection and order allocation," International Journal of Production Economics, Elsevier, vol. 217(C), pages 171-184.
    12. Chan, Felix T.S. & Kumar, Niraj, 2007. "Global supplier development considering risk factors using fuzzy extended AHP-based approach," Omega, Elsevier, vol. 35(4), pages 417-431, August.
    13. Jop Schouten & Mirjam GrooteSchaarsberg & Peter Borm, 2024. "Cost sharing methods for capacity restricted cooperative purchasing situations," Review of Economic Design, Springer;Society for Economic Design, vol. 28(2), pages 347-390, June.
    14. Hu, Kuo-Jen & Yu, Vincent F., 2016. "An integrated approach for the electronic contract manufacturer selection problem," Omega, Elsevier, vol. 62(C), pages 68-81.
    15. Zeki Ayağ & Funda Samanlioglu, 2016. "An intelligent approach to supplier evaluation in automotive sector," Journal of Intelligent Manufacturing, Springer, vol. 27(4), pages 889-903, August.
    16. Kawtummachai, Ruengsak & Van Hop, Nguyen, 2005. "Order allocation in a multiple-supplier environment," International Journal of Production Economics, Elsevier, vol. 93(1), pages 231-238, January.
    17. Xiongyong Zhou & Zhiduan Xu, 2018. "An Integrated Sustainable Supplier Selection Approach Based on Hybrid Information Aggregation," Sustainability, MDPI, vol. 10(7), pages 1-49, July.
    18. Lamba, Kuldeep & Singh, Surya Prakash, 2019. "Dynamic supplier selection and lot-sizing problem considering carbon emissions in a big data environment," Technological Forecasting and Social Change, Elsevier, vol. 144(C), pages 573-584.
    19. Rezaei, Jafar & Davoodi, Mansoor, 2011. "Multi-objective models for lot-sizing with supplier selection," International Journal of Production Economics, Elsevier, vol. 130(1), pages 77-86, March.
    20. Schouten, Jop, 2022. "Cooperation, allocation and strategy in interactive decision-making," Other publications TiSEM d5d41448-8033-4f6b-8ec0-c, Tilburg University, School of Economics and Management.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:ijsaem:v:13:y:2022:i:5:d:10.1007_s13198-022-01624-2. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.