IDEAS home Printed from https://ideas.repec.org/a/spr/ijsaem/v12y2021i6d10.1007_s13198-021-01307-4.html
   My bibliography  Save this article

Performance analysis of curd (Dahi) producing system of milk plant by using trapezoidal fuzzy numbers with different left and right heights

Author

Listed:
  • Parveen Kumari

    (Kurukshetra University)

  • M. S. Kadyan

    (Kurukshetra University)

  • Jitender Kumar

    (Kurukshetra University)

Abstract

This paper is devoted to performance analysis of curd producing system of milk plant which consists of five subsystems—‘Chiller’, ‘Pasteurizer’, ‘Silos’, ‘Vat Tank’ and ‘Automatic packaging Machine’. All the five subsystems are connected in series configuration. The subsystems ‘Chiller’, ‘Pasteurizer’, ‘Vat Tank’, and ‘Automatic Packaging Machine’ each consists of single unit but the subsystem ‘Silos’ having two similar units in which one is operative and other is in cold standby. Both parameters (i.e. failure rates and repair rates) are replaced by trapezoidal fuzzy numbers with different left and right heights to analyze the curd producing system of milk plant in more realistic environment. Fuzzy availability and fuzzy profit generated by the curd producing system have been evaluated numerically and explored graphically for particular values of various parameters and costs by assuming that all random variables associated with the present system follow exponential, Rayleigh and weibull distribution.

Suggested Citation

  • Parveen Kumari & M. S. Kadyan & Jitender Kumar, 2021. "Performance analysis of curd (Dahi) producing system of milk plant by using trapezoidal fuzzy numbers with different left and right heights," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(6), pages 1348-1361, December.
    • Handle: RePEc:spr:ijsaem:v:12:y:2021:i:6:d:10.1007_s13198-021-01307-4
    DOI: 10.1007/s13198-021-01307-4
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s13198-021-01307-4
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s13198-021-01307-4?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Anil Kr. Aggarwal & Vikram Singh & Sanjeev Kumar, 2017. "Availability analysis and performance optimization of a butter oil production system: a case study," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(1), pages 538-554, January.
    2. Kumar, Pankaj & Jain, Madhu, 2020. "Reliability analysis of a multi-component machining system with service interruption, imperfect coverage, and reboot," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    3. Parveen Kumari & Mukender Singh Kadyan & Jitender Kumar, 2019. "Profit analysis of butter-oil (ghee) producing system of milk plant using supplementary variable technique," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(6), pages 1627-1638, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Parveen Kumari & Mukender Singh Kadyan & Jitender Kumar, 2019. "Profit analysis of butter-oil (ghee) producing system of milk plant using supplementary variable technique," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(6), pages 1627-1638, December.
    2. Nitin Panwar & Sanjeev Kumar, 2022. "Mathematical modelling and performance analysis of screening unit in paper plant," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(5), pages 2751-2763, October.
    3. Wang, Kuo-Hsiung & Wu, Chia-Huang & Yen, Tseng-Chang, 2022. "Comparative cost-benefit analysis of four retrial systems with preventive maintenance and unreliable service station," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    4. Gao, Shan, 2023. "Reliability analysis and optimization for a redundant system with dependent failures and variable repair rates," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 208(C), pages 637-659.
    5. Monika & Garima Chopra, 2024. "Reliability assessment of an industrial system considering failures in its raw material inventory," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 15(6), pages 2704-2714, June.
    6. Zhou, Siwei & Ye, Luyao & Xiong, Shengwu & Xiang, Jianwen, 2022. "Reliability analysis of dynamic fault trees with Priority-AND gates based on irrelevance coverage model," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    7. Gao, Shan & Wang, Jinting & Zhang, Jie, 2023. "Reliability analysis of a redundant series system with common cause failures and delayed vacation," Reliability Engineering and System Safety, Elsevier, vol. 239(C).
    8. Yangfan Li & Yingjie Zhang & Ning An, 2024. "Accuracy reliability analysis of CNC machine tools considering manufacturing errors degrees," Journal of Risk and Reliability, , vol. 238(3), pages 643-653, June.
    9. Jain, Madhu & Kumar, Pankaj & Singh, Mayank & Gupta, Ritu, 2024. "Cost optimization and reliability analysis of fault tolerant system with service interruption and reboot," Reliability Engineering and System Safety, Elsevier, vol. 249(C).
    10. Wu, Chia-Huang & Yen, Tseng-Chang & Wang, Kuo-Hsiung, 2021. "Availability and Comparison of Four Retrial Systems with Imperfect Coverage and General Repair Times," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    11. Subhi Tyagi & Nupur Goyal & Akshay Kumar & Mangey Ram, 2022. "Stochastic hybrid energy system modelling with component failure and repair," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(2), pages 842-852, June.
    12. Yang, Dong-Yuh & Wu, Chia-Huang, 2021. "Evaluation of the availability and reliability of a standby repairable system incorporating imperfect switchovers and working breakdowns," Reliability Engineering and System Safety, Elsevier, vol. 207(C).
    13. de Araujo, Matheus Soares & da Silva, Leandro Dias & Sobrinho, Ã lvaro & Cunha, Paulo & Montecchi, Leonardo, 2022. "Reliability analysis of multi-parameter monitoring systems for Intensive Care Units," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    14. Cheng, Dawei & Lu, Zhong & Zhou, Jia & Liang, Xihui, 2023. "An optimizing maintenance policy for airborne redundant systems operating with faults by using Markov process and NSGA-II," Reliability Engineering and System Safety, Elsevier, vol. 236(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:ijsaem:v:12:y:2021:i:6:d:10.1007_s13198-021-01307-4. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.