IDEAS home Printed from https://ideas.repec.org/a/spr/endesu/v24y2022i9d10.1007_s10668-021-01895-y.html
   My bibliography  Save this article

Case study of augmenting livelihood of fishing community at Sagar Island, India, through solar thermal dryer technology

Author

Listed:
  • Jigar K. Andharia

    (Process Design & Engineering Cell, CSIR-Central Salt & Marine Chemicals Research Institute)

  • Sanjay Haldar

    (Vivekananda Institute of Biotechnology, Sri Ramkrishna Ashram)

  • Shilpa Samaddar

    (Process Design & Engineering Cell, CSIR-Central Salt & Marine Chemicals Research Institute)

  • Subarna Maiti

    (Process Design & Engineering Cell, CSIR-Central Salt & Marine Chemicals Research Institute)

Abstract

Drying of fish at the Sagar Island (21.7269° N, 88.1096° E) is generally carried out in open sun on the seashore on plastic sheets or mat of palm leaves. This is not an environment-friendly and healthy practice. To alleviate the limitations of open sun drying, 600 kg (300 kg × 2) walk-in solar thermal dryer was installed at a fishing cooperative. The dryer consequently augmented the income of the fisher folk by enhancing throughput and refining the quality of dried fish. The design incorporated, (a) 80% UV cut-off film to take care of appearance of the dried fish; (b) facilitating proper air flow pattern for uniform both side drying; (c) completely dismantlable system to take care of incoming storms/cyclones in advance; (d) solar photovoltaic powered dehumidifiers to control the relative humidity at night and achieve a dried batch in less than 24 h. The fabricated solar thermal dryer had drying temperature in the range of 36.9–53.1 °C throughout the day. Due to the use of the dehumidifiers, an entire batch of fish could be dried from an initial 80% to final 10% moisture content (wet basis) in less than 24 h compared to 38 h in open sun drying. The solar thermal drying efficiency was 30.24% and specific energy consumption was found to be 2.35 kg/kWh. The embodied energy was 10,756 kWh and CO2 emission was calculated to be 422 kg per year, which was lower than other fossil-driven drying systems.

Suggested Citation

  • Jigar K. Andharia & Sanjay Haldar & Shilpa Samaddar & Subarna Maiti, 2022. "Case study of augmenting livelihood of fishing community at Sagar Island, India, through solar thermal dryer technology," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(9), pages 11449-11469, September.
  • Handle: RePEc:spr:endesu:v:24:y:2022:i:9:d:10.1007_s10668-021-01895-y
    DOI: 10.1007/s10668-021-01895-y
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s10668-021-01895-y
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.

    File URL: https://libkey.io/10.1007/s10668-021-01895-y?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ahmadi, Gholamreza & Toghraie, Davood & Akbari, Omid Ali, 2017. "Solar parallel feed water heating repowering of a steam power plant: A case study in Iran," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 474-485.
    2. Hemmat Esfe, Mohammad & Hajmohammad, Hadi & Toghraie, Davood & Rostamian, Hadi & Mahian, Omid & Wongwises, Somchai, 2017. "Multi-objective optimization of nanofluid flow in double tube heat exchangers for applications in energy systems," Energy, Elsevier, vol. 137(C), pages 160-171.
    3. Edmonds, Ian, 2018. "Low cost realisation of a high temperature solar cooker," Renewable Energy, Elsevier, vol. 121(C), pages 94-101.
    4. Toghraie, Davood & Karami, Amir & Afrand, Masoud & Karimipour, Arash, 2018. "Effects of geometric parameters on the performance of solar chimney power plants," Energy, Elsevier, vol. 162(C), pages 1052-1061.
    5. Tiwari, Sumit & Tiwari, G.N., 2016. "Exergoeconomic analysis of photovoltaic-thermal (PVT) mixed mode greenhouse solar dryer," Energy, Elsevier, vol. 114(C), pages 155-164.
    6. Jozaalizadeh, Toomaj & Toghraie, Davood, 2019. "Numerical investigation behavior of reacting flow for flameless oxidation technology of MILD combustion: Effect of fluctuating temperature of inlet co-flow," Energy, Elsevier, vol. 178(C), pages 530-537.
    7. Ahmadi, Gholamreza & Toghraie, Davood & Akbari, Omid Ali, 2018. "Technical and environmental analysis of repowering the existing CHP system in a petrochemical plant: A case study," Energy, Elsevier, vol. 159(C), pages 937-949.
    8. Dabiri, Soroush & Khodabandeh, Erfan & Poorfar, Alireza Khoeini & Mashayekhi, Ramin & Toghraie, Davood & Abadian Zade, Seyed Ali, 2018. "Parametric investigation of thermal characteristic in trapezoidal cavity receiver for a linear Fresnel solar collector concentrator," Energy, Elsevier, vol. 153(C), pages 17-26.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mohtaram, Soheil & Sun, HongGuang & Lin, Ji & Chen, Wen & Sun, Yonghui, 2020. "Multi-Objective Evolutionary Optimization & 4E analysis of a bulky combined cycle power plant by CO2/ CO/ NOx reduction and cost controlling targets," Renewable and Sustainable Energy Reviews, Elsevier, vol. 128(C).
    2. Gurjeet Singh & K. Chopra & V. V. Tyagi & A. K. Pandey & R. K. Sharma & Ahmet Sari, 2022. "Estimation of thermodynamic and enviroeconomic characteristics of khoa (milk food) production unit," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(11), pages 12542-12581, November.
    3. Ma, Guiling & Chen, Yanting & Ndegwa, Pius, 2022. "Anaerobic digestion process deactivates major pathogens in biowaste: A meta-analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    4. Singh, Pushpendra & Meena, Nand K. & Yang, Jin & Vega-Fuentes, Eduardo & Bishnoi, Shree Krishna, 2020. "Multi-criteria decision making monarch butterfly optimization for optimal distributed energy resources mix in distribution networks," Applied Energy, Elsevier, vol. 278(C).
    5. Naderi, Mansoor & Ahmadi, Gholamreza & Zarringhalam, Majid & Akbari, Omidali & Khalili, Ebrahim, 2018. "Application of water reheating system for waste heat recovery in NG pressure reduction stations, with experimental verification," Energy, Elsevier, vol. 162(C), pages 1183-1192.
    6. Ahmadi, Gholamreza & Toghraie, Davood & Akbari, Omidali, 2019. "Energy, exergy and environmental (3E) analysis of the existing CHP system in a petrochemical plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 99(C), pages 234-242.
    7. Ahmadi, Gholamreza & Toghraie, Davood & Akbari, Omid Ali, 2018. "Technical and environmental analysis of repowering the existing CHP system in a petrochemical plant: A case study," Energy, Elsevier, vol. 159(C), pages 937-949.
    8. Bahrami, Mehrdad & Akbari, Mohammad & Bagherzadeh, Seyed Amin & Karimipour, Arash & Afrand, Masoud & Goodarzi, Marjan, 2019. "Develop 24 dissimilar ANNs by suitable architectures & training algorithms via sensitivity analysis to better statistical presentation: Measure MSEs between targets & ANN for Fe–CuO/Eg–Water nanofluid," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 519(C), pages 159-168.
    9. S Ayyappan, 2018. "Performance and CO2 mitigation analysis of a solar greenhouse dryer for coconut drying," Energy & Environment, , vol. 29(8), pages 1482-1494, December.
    10. Shaikh Zishan & Altaf Hossain Molla & Haroon Rashid & Kok Hoe Wong & Ahmad Fazlizan & Molla Shahadat Hossain Lipu & Mohd Tariq & Omar Mutab Alsalami & Mahidur R. Sarker, 2023. "Comprehensive Analysis of Kinetic Energy Recovery Systems for Efficient Energy Harnessing from Unnaturally Generated Wind Sources," Sustainability, MDPI, vol. 15(21), pages 1-18, October.
    11. Singh, Pushpendra & Shrivastava, Vipin & Kumar, Anil, 2018. "Recent developments in greenhouse solar drying: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3250-3262.
    12. Shen, Boyang & Chen, Yu & Li, Chuanyue & Wang, Sheng & Chen, Xiaoyuan, 2021. "Superconducting fault current limiter (SFCL): Experiment and the simulation from finite-element method (FEM) to power/energy system software," Energy, Elsevier, vol. 234(C).
    13. Singh, Sukhmeet & Gill, R.S. & Hans, V.S. & Mittal, T.C., 2022. "Experimental performance and economic viability of evacuated tube solar collector assisted greenhouse dryer for sustainable development," Energy, Elsevier, vol. 241(C).
    14. Firoozzadeh, Mohammad & Shiravi, Amir Hossein & Lotfi, Marzieh & Aidarova, Saule & Sharipova, Altynay, 2021. "Optimum concentration of carbon black aqueous nanofluid as coolant of photovoltaic modules: A case study," Energy, Elsevier, vol. 225(C).
    15. Xiong, Hanbing & Ming, Tingzhen & Shi, Tianhao & Wu, Yongjia & Li, Wei & de Richter, Renaud & Zhou, Nan, 2024. "Numerical investigation on performance of solar chimney power plant with three wind resistant structures," Energy, Elsevier, vol. 297(C).
    16. Naserabad, S. Nikbakht & Mehrpanahi, A. & Ahmadi, G., 2018. "Multi-objective optimization of HRSG configurations on the steam power plant repowering specifications," Energy, Elsevier, vol. 159(C), pages 277-293.
    17. Khatri, Rahul & Goyal, Rahul & Sharma, Ravi Kumar, 2021. "Advances in the developments of solar cooker for sustainable development: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    18. Ruhani, Behrooz & Toghraie, Davood & Hekmatifar, Maboud & Hadian, Mahdieh, 2019. "Statistical investigation for developing a new model for rheological behavior of ZnO–Ag (50%–50%)/Water hybrid Newtonian nanofluid using experimental data," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 525(C), pages 741-751.
    19. Wang, Wen-Qi & Li, Ming-Jia & Cheng, Ze-Dong & Li, Dong & Liu, Zhan-Bin, 2021. "Coupled optical-thermal-stress characteristics of a multi-tube external molten salt receiver for the next generation concentrating solar power," Energy, Elsevier, vol. 233(C).
    20. Francisco Álvarez-Sánchez & Jassón Flores-Prieto & Octavio García-Valladares, 2021. "Annual Thermal Performance of an Industrial Hybrid Direct–Indirect Solar Air Heating System for Drying Applications in Morelos-México," Energies, MDPI, vol. 14(17), pages 1-20, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:endesu:v:24:y:2022:i:9:d:10.1007_s10668-021-01895-y. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.