IDEAS home Printed from https://ideas.repec.org/a/sae/intdis/v14y2018i6p1550147718782373.html
   My bibliography  Save this article

Control of steering wheel idle jitter based on optimization of engine suspension system with verifications using multi-sensor measurement

Author

Listed:
  • Shuilong He
  • Binqiang Chen
  • Zhansi Jiang
  • Yanxue Wang
  • Fuyun Liu

Abstract

Strong steering wheel jitter during idling states of the engine can seriously deteriorate the driving comfort as well as the driving safety. The powertrain suspension system can be considered as the only essential path for the transmission of vibrations from the engine to the vehicle cab. Its vibration isolation performance directly affects the severity of vibrations on the steering wheel. In this article, aiming at solving the problem of a certain type of commercial vehicle’s steering wheel with strong idle jitter at the idle state, the intrinsic characteristics and vibration isolation performances of the powertrain suspension system were studied in detail. A multi-sensor-based measurement strategy was utilized to evaluate the idle jitter severity of the steering wheel. In order to improve the indicators of the decoupling degree, the vibration transmissibility, and the resonant frequency distributions of the engine suspension system, an optimization model of engine suspension system was established. Parameters of the optimized suspension system were obtained by multi-objective particle swarm optimization. Finally, the effectiveness and feasibility of the optimization algorithm to solve the problem of the vehicle’s steering wheel jitter at idle states were verified through a test using multiple acceleration sensors, which has practical values in the engineering field.

Suggested Citation

  • Shuilong He & Binqiang Chen & Zhansi Jiang & Yanxue Wang & Fuyun Liu, 2018. "Control of steering wheel idle jitter based on optimization of engine suspension system with verifications using multi-sensor measurement," International Journal of Distributed Sensor Networks, , vol. 14(6), pages 15501477187, June.
    • Handle: RePEc:sae:intdis:v:14:y:2018:i:6:p:1550147718782373
    DOI: 10.1177/1550147718782373
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/1550147718782373
    Download Restriction: no
    File URL: https://libkey.io/10.1177/1550147718782373?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Delgarm, N. & Sajadi, B. & Kowsary, F. & Delgarm, S., 2016. "Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO)," Applied Energy, Elsevier, vol. 170(C), pages 293-303.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Saurbayeva, Assemgul & Memon, Shazim Ali & Kim, Jong, 2023. "Integrated multi-stage sensitivity analysis and multi-objective optimization approach for PCM integrated residential buildings in different climate zones," Energy, Elsevier, vol. 278(PB).
    2. Roth, Jonathan & Martin, Amory & Miller, Clayton & Jain, Rishee K., 2020. "SynCity: Using open data to create a synthetic city of hourly building energy estimates by integrating data-driven and physics-based methods," Applied Energy, Elsevier, vol. 280(C).
    3. Niemelä, Tuomo & Kosonen, Risto & Jokisalo, Juha, 2016. "Cost-optimal energy performance renovation measures of educational buildings in cold climate," Applied Energy, Elsevier, vol. 183(C), pages 1005-1020.
    4. Liang, Xinbin & Zhu, Xu & Chen, Siliang & Jin, Xinqiao & Xiao, Fu & Du, Zhimin, 2023. "Physics-constrained cooperative learning-based reference models for smart management of chillers considering extrapolation scenarios," Applied Energy, Elsevier, vol. 349(C).
    5. García Kerdan, Iván & Raslan, Rokia & Ruyssevelt, Paul & Morillón Gálvez, David, 2017. "A comparison of an energy/economic-based against an exergoeconomic-based multi-objective optimisation for low carbon building energy design," Energy, Elsevier, vol. 128(C), pages 244-263.
    6. Lee, Junghun & Kim, Jeonggook & Song, Doosam & Kim, Jonghun & Jang, Cheolyong, 2017. "Impact of external insulation and internal thermal density upon energy consumption of buildings in a temperate climate with four distinct seasons," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1081-1088.
    7. Rabani, Mehrdad & Bayera Madessa, Habtamu & Mohseni, Omid & Nord, Natasa, 2020. "Minimizing delivered energy and life cycle cost using Graphical script: An office building retrofitting case," Applied Energy, Elsevier, vol. 268(C).
    8. Harkouss, Fatima & Fardoun, Farouk & Biwole, Pascal Henry, 2018. "Passive design optimization of low energy buildings in different climates," Energy, Elsevier, vol. 165(PA), pages 591-613.
    9. Kangji Li & Lei Pan & Wenping Xue & Hui Jiang & Hanping Mao, 2017. "Multi-Objective Optimization for Energy Performance Improvement of Residential Buildings: A Comparative Study," Energies, MDPI, vol. 10(2), pages 1-23, February.
    10. Zeng, Zhiqiang & Hong, Mengna & Li, Jigeng & Man, Yi & Liu, Huanbin & Li, Zeeman & Zhang, Huanhuan, 2018. "Integrating process optimization with energy-efficiency scheduling to save energy for paper mills," Applied Energy, Elsevier, vol. 225(C), pages 542-558.
    11. Gezen, Mesliha & Karaaslan, Abdulkerim, 2022. "Energy planning based on Vision-2023 of Turkey with a goal programming under fuzzy multi-objectives," Energy, Elsevier, vol. 261(PA).
    12. Tezer, Tuba & Yaman, Ramazan & Yaman, Gülşen, 2017. "Evaluation of approaches used for optimization of stand-alone hybrid renewable energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 840-853.
    13. Yu, Min Gyung & Pavlak, Gregory S., 2022. "Extracting interpretable building control rules from multi-objective model predictive control data sets," Energy, Elsevier, vol. 240(C).
    14. Yin, Qian & Du, Wen-Jing & Cheng, Lin, 2017. "Optimization design of heat recovery systems on rotary kilns using genetic algorithms," Applied Energy, Elsevier, vol. 202(C), pages 153-168.
    15. Hong, Taehoon & Kim, Jimin & Lee, Minhyun, 2019. "A multi-objective optimization model for determining the building design and occupant behaviors based on energy, economic, and environmental performance," Energy, Elsevier, vol. 174(C), pages 823-834.
    16. Yujie Zhang & Yukun Wang & Xiaopeng Li & Yiliu Liu & Weizheng Gao, 2024. "Condition-based maintenance optimization for deteriorating systems considering performance-based contracting and destructive inspections," Journal of Risk and Reliability, , vol. 238(2), pages 247-259, April.
    17. Chen, Yizhong & He, Li & Li, Jing & Cheng, Xi & Lu, Hongwei, 2016. "An inexact bi-level simulation–optimization model for conjunctive regional renewable energy planning and air pollution control for electric power generation systems," Applied Energy, Elsevier, vol. 183(C), pages 969-983.
    18. Tan, Yutong & Peng, Jinqing & Luo, Yimo & Gao, Jing & Luo, Zhengyi & Wang, Meng & Curcija, Dragan C., 2022. "Parametric study of venetian blinds for energy performance evaluation and classification in residential buildings," Energy, Elsevier, vol. 239(PD).
    19. Li, Jinchao & Wu, Qianqian & Tian, Yu & Fan, Liguo, 2021. "Monthly Henry Hub natural gas spot prices forecasting using variational mode decomposition and deep belief network," Energy, Elsevier, vol. 227(C).
    20. Wang, Hao & Chen, Xiwen & Vital, Natan & Duffy, Edward & Razi, Abolfazl, 2024. "Energy optimization for HVAC systems in multi-VAV open offices: A deep reinforcement learning approach," Applied Energy, Elsevier, vol. 356(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:intdis:v:14:y:2018:i:6:p:1550147718782373. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.