IDEAS home Printed from https://ideas.repec.org/a/sae/engenv/v34y2023i2p407-428.html
   My bibliography  Save this article

Analysis of vibrations in a diesel engine produced by Jatropha biodiesel using heterogeneous catalyst

Author

Listed:
  • Aparna Singh
  • Akhilesh Kumar Choudhary
  • Shailendra Sinha
  • Hitesh Panchal
  • Kishor Kumar Sadasivuni

Abstract

Extensive consumption of fossil fuel has contributed to the worldwide decline of its reserves and detrimental effect on the environment. Therefore, it is essential to explore alternative option of fuel for diesel engine. The main objective of this research article is to optimize vibrations in a single-cylinder variable compression ratio diesel engine driven by Jatropha biodiesel blend. The heterogeneous catalyst (calcium oxide) is used to manufacture of biodiesel from Jatropha curcas oil by a process of transesterification. The optimization technique (Response Surface Methodology) has been employed to optimize root mean square acceleration of vibration by taking load, compression ratio (CR), and fuel injection pressure (FIP) as engine input parameters. Experiments were designed according to central composite design. The amplitude of the frequency domain signals is determined using Fast Fourier Transform and the influence of input parameters has been investigated in the frequency domain analysis of the vibration signatures. The adequacy and significance of the models have been checked by p -value and F value tests. Regression coefficients Adj. R 2 , R 2 , Pred. R 2 were also found in acceptable range. The experimental outcome reveals that biodiesel yield of 81.6% was obtained at methanol-to-oil molar ratio of 12:1, reaction temperature of 65°C, reaction time of 3 h, and catalyst concentration of 5 wt%. Simultaneously, the model obtained a series of solutions based on the desirability criteria and proposed optimum setting of engine input parameters at a load of 2.59 kg, 17.94 CR, and 268.76 bar FIP for B30 blend. B30 blend generated root mean square acceleration of 4.46 m/s 2 at above optimized conditions. A validation trial was conducted and the percentage of error for root mean square acceleration was found to be 2.3356% and 1.3039%, respectively, for B0 and B30 blend.

Suggested Citation

  • Aparna Singh & Akhilesh Kumar Choudhary & Shailendra Sinha & Hitesh Panchal & Kishor Kumar Sadasivuni, 2023. "Analysis of vibrations in a diesel engine produced by Jatropha biodiesel using heterogeneous catalyst," Energy & Environment, , vol. 34(2), pages 407-428, March.
    • Handle: RePEc:sae:engenv:v:34:y:2023:i:2:p:407-428
    DOI: 10.1177/0958305X211063935
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/0958305X211063935
    Download Restriction: no
    File URL: https://libkey.io/10.1177/0958305X211063935?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Chiatti, Giancarlo & Chiavola, Ornella & Palmieri, Fulvio, 2017. "Vibration and acoustic characteristics of a city-car engine fueled with biodiesel blends," Applied Energy, Elsevier, vol. 185(P1), pages 664-670.
    2. Meher, L.C. & Vidya Sagar, D. & Naik, S.N., 2006. "Technical aspects of biodiesel production by transesterification--a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 10(3), pages 248-268, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hatami, Behnam & Ebrahimi, Aliasghar & Ehrampoush, Mohammad Hassan & Salmani, Mohammad Hossein & Dalvand, Arash & Pirmoradi, Neda & Angelidaki, Irini & Fotidis, Ioannis A. & Mokhtari, Mehdi, 2021. "Recovery of intermittent cycle extended aeration system sludge through conversion into biodiesel by in-situ transesterification," Renewable Energy, Elsevier, vol. 163(C), pages 56-65.
    2. Pullen, James & Saeed, Khizer, 2014. "Factors affecting biodiesel engine performance and exhaust emissions – Part I: Review," Energy, Elsevier, vol. 72(C), pages 1-16.
    3. Siwina, Siraprapha & Leesing, Ratanaporn, 2021. "Bioconversion of durian (Durio zibethinus Murr.) peel hydrolysate into biodiesel by newly isolated oleaginous yeast Rhodotorula mucilaginosa KKUSY14," Renewable Energy, Elsevier, vol. 163(C), pages 237-245.
    4. Kim, Tae-Hyoung & Lee, Kyungho & Oh, Baek-Rock & Lee, Mi-Eun & Seo, Minji & Li, Sheng & Kim, Jae-Kon & Choi, Minkee & Chang, Yong Keun, 2021. "A novel process for the coproduction of biojet fuel and high-value polyunsaturated fatty acid esters from heterotrophic microalgae Schizochytrium sp. ABC101," Renewable Energy, Elsevier, vol. 165(P1), pages 481-490.
    5. Aytav, Emre & Kocar, Günnur, 2013. "Biodiesel from the perspective of Turkey: Past, present and future," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 335-350.
    6. Talebian-Kiakalaieh, Amin & Amin, Nor Aishah Saidina & Mazaheri, Hossein, 2013. "A review on novel processes of biodiesel production from waste cooking oil," Applied Energy, Elsevier, vol. 104(C), pages 683-710.
    7. Rawat, Devendra S. & Joshi, Girdhar & Lamba, Bhawna Y. & Tiwari, Avanish K. & Kumar, Pankaj, 2015. "The effect of binary antioxidant proportions on antioxidant synergy and oxidation stability of Jatropha and Karanja biodiesels," Energy, Elsevier, vol. 84(C), pages 643-655.
    8. George Anastopoulos & Ypatia Zannikou & Stamoulis Stournas & Stamatis Kalligeros, 2009. "Transesterification of Vegetable Oils with Ethanol and Characterization of the Key Fuel Properties of Ethyl Esters," Energies, MDPI, vol. 2(2), pages 1-15, June.
    9. Ennaceri, Houda & Fischer, Kristina & Schulze, Agnes & Moheimani, Navid Reza, 2022. "Membrane fouling control for sustainable microalgal biodiesel production: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    10. Malhotra, Rashi & Ali, Amjad, 2019. "5-Na/ZnO doped mesoporous silica as reusable solid catalyst for biodiesel production via transesterification of virgin cottonseed oil," Renewable Energy, Elsevier, vol. 133(C), pages 606-619.
    11. Murphy, Fionnuala & Devlin, Ger & Deverell, Rory & McDonnell, Kevin, 2014. "Potential to increase indigenous biodiesel production to help meet 2020 targets – An EU perspective with a focus on Ireland," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 154-170.
    12. Marco Castellini & Stefano Ubertini & Diego Barletta & Ilaria Baffo & Pietro Buzzini & Marco Barbanera, 2021. "Techno-Economic Analysis of Biodiesel Production from Microbial Oil Using Cardoon Stalks as Carbon Source," Energies, MDPI, vol. 14(5), pages 1-21, March.
    13. Chen, Yi-Hung & Chen, Jhih-Hong & Luo, Yu-Min, 2012. "Complementary biodiesel combination from tung and medium-chain fatty acid oils," Renewable Energy, Elsevier, vol. 44(C), pages 305-310.
    14. Thamsiriroj, Thanasit & Murphy, Jerry D., 2011. "A critical review of the applicability of biodiesel and grass biomethane as biofuels to satisfy both biofuel targets and sustainability criteria," Applied Energy, Elsevier, vol. 88(4), pages 1008-1019, April.
    15. Verma, Puneet & Sharma, M.P., 2016. "Review of process parameters for biodiesel production from different feedstocks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 1063-1071.
    16. Lau, Pak-Chung & Kwong, Tsz-Lung & Yung, Ka-Fu, 2022. "Manganese glycerolate catalyzed simultaneous esterification and transesterification: The kinetic and mechanistic study, and application in biodiesel and bio-lubricants synthesis," Renewable Energy, Elsevier, vol. 189(C), pages 549-558.
    17. Atapour, Mehdi & Kariminia, Hamid-Reza, 2011. "Characterization and transesterification of Iranian bitter almond oil for biodiesel production," Applied Energy, Elsevier, vol. 88(7), pages 2377-2381, July.
    18. Maity, Sunil K., 2015. "Opportunities, recent trends and challenges of integrated biorefinery: Part II," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1446-1466.
    19. Patel, Madhumita & Kumar, Amit, 2016. "Production of renewable diesel through the hydroprocessing of lignocellulosic biomass-derived bio-oil: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 1293-1307.
    20. Venu, Harish & Raju, V. Dhana & Subramani, Lingesan & Appavu, Prabhu, 2020. "Experimental assessment on the regulated and unregulated emissions of DI diesel engine fuelled with Chlorella emersonii methyl ester (CEME)," Renewable Energy, Elsevier, vol. 151(C), pages 88-102.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:engenv:v:34:y:2023:i:2:p:407-428. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.