IDEAS home Printed from https://ideas.repec.org/a/sae/engenv/v29y2018i5p822-836.html
   My bibliography  Save this article

Effect of the turbine diameter on the generated power of a solar chimney power plant

Author

Listed:
  • Ahmed Ayadi
  • Zied Driss
  • Abdallah Bouabidi
  • Mohamed S Abid

Abstract

The solar chimney power plants produce electricity and thermal heat using the solar radiation. The thermal study of the solar chimney power plants is required since these systems are characterized by their high costs. This paper focuses on the study of a solar chimney power plant coupled with a turbine to increase the generated power. Thus, four turbine diameters are proposed. For each configuration, the distribution of the magnitude velocity, the air temperature, and the pressure was discussed. The results indicate that the generated power increases with the increase of the turbine diameter. This technical solution is identified interesting for designers to increase the generated power.

Suggested Citation

  • Ahmed Ayadi & Zied Driss & Abdallah Bouabidi & Mohamed S Abid, 2018. "Effect of the turbine diameter on the generated power of a solar chimney power plant," Energy & Environment, , vol. 29(5), pages 822-836, August.
  • Handle: RePEc:sae:engenv:v:29:y:2018:i:5:p:822-836
    DOI: 10.1177/0958305X18761148
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/0958305X18761148
    Download Restriction: no

    File URL: https://libkey.io/10.1177/0958305X18761148?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Ayadi, Ahmed & Bouabidi, Abdallah & Driss, Zied & Abid, Mohamed Salah, 2018. "Experimental and numerical analysis of the collector roof height effect on the solar chimney performance," Renewable Energy, Elsevier, vol. 115(C), pages 649-662.
    2. Driss, Zied & Mlayeh, Olfa & Driss, Slah & Maaloul, Makram & Abid, Mohamed Salah, 2016. "Study of the incidence angle effect on the aerodynamic structure characteristics of an incurved Savonius wind rotor placed in a wind tunnel," Energy, Elsevier, vol. 113(C), pages 894-908.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nirmalendu Biswas & Dipak Kumar Mandal & Sharmistha Bose & Nirmal K. Manna & Ali Cemal Benim, 2023. "Experimental Treatment of Solar Chimney Power Plant—A Comprehensive Review," Energies, MDPI, vol. 16(17), pages 1-41, August.
    2. Singh, Ajeet Pratap & Kumar, Amit & Akshayveer, & Singh, O.P., 2021. "A novel concept of integrating bell-mouth inlet in converging-diverging solar chimney power plant," Renewable Energy, Elsevier, vol. 169(C), pages 318-334.
    3. Can Kang & Wisdom Opare & Chen Pan & Ziwen Zou, 2018. "Upstream Flow Control for the Savonius Rotor under Various Operation Conditions," Energies, MDPI, vol. 11(6), pages 1-20, June.
    4. Praveen, Vivek & Das, Pritam & Chandramohan, V.P., 2021. "A novel concept of introducing a fillet at the chimney base of solar updraft tower plant and thereby improving the performance: A numerical study," Renewable Energy, Elsevier, vol. 179(C), pages 37-46.
    5. Das, Pritam & Chandramohan, V.P., 2019. "Computational study on the effect of collector cover inclination angle, absorber plate diameter and chimney height on flow and performance parameters of solar updraft tower (SUT) plant," Energy, Elsevier, vol. 172(C), pages 366-379.
    6. Sedighi, Ali Asghar & Deldoost, Zeynab & Karambasti, Bahram Mahjoob, 2020. "Effect of thermal energy storage layer porosity on performance of solar chimney power plant considering turbine pressure drop," Energy, Elsevier, vol. 194(C).
    7. Bakri, Badis & Eleuch, Oumaima & Ketata, Ahmed & Driss, Slah & Driss, Zied & Benguesmia, Hani, 2018. "Study of the turbulent flow in a newly solar air heater test bench with natural and forced convection modes," Energy, Elsevier, vol. 161(C), pages 1028-1041.
    8. Tahani, Mojtaba & Rabbani, Ali & Kasaeian, Alibakhsh & Mehrpooya, Mehdi & Mirhosseini, Mojtaba, 2017. "Design and numerical investigation of Savonius wind turbine with discharge flow directing capability," Energy, Elsevier, vol. 130(C), pages 327-338.
    9. Maia, Cristiana Brasil & Castro Silva, Janaína de Oliveira, 2022. "Thermodynamic assessment of a small-scale solar chimney," Renewable Energy, Elsevier, vol. 186(C), pages 35-50.
    10. Farzadi, Ramin & Bazargan, Majid, 2023. "3D numerical simulation of the Darrieus vertical axis wind turbine with J-type and straight blades under various operating conditions including self-starting mode," Energy, Elsevier, vol. 278(PB).
    11. Karimian, S.M.H. & Abdolahifar, Abolfazl, 2020. "Performance investigation of a new Darrieus Vertical Axis Wind Turbine," Energy, Elsevier, vol. 191(C).
    12. Muhammed, Hardi A. & Atrooshi, Soorkeu A., 2019. "Modeling solar chimney for geometry optimization," Renewable Energy, Elsevier, vol. 138(C), pages 212-223.
    13. Weli, Rizgar Bakr & Atrooshi, Soorkeu A. & Schwarze, Ruediger, 2021. "Investigation of the performance parameters of a sloped collector solar chimney model – An adaptation for the North of Iraq," Renewable Energy, Elsevier, vol. 176(C), pages 504-519.
    14. Seungjin Lee & Yoon Seok Kim & Joong Yull Park, 2018. "Numerical Investigation on the Effects of Baffles with Various Thermal and Geometrical Conditions on Thermo-Fluid Dynamics and Kinetic Power of a Solar Updraft Tower," Energies, MDPI, vol. 11(9), pages 1-14, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:engenv:v:29:y:2018:i:5:p:822-836. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.