IDEAS home Printed from https://ideas.repec.org/a/inm/oropre/v46y1998i1p36-45.html
   My bibliography  Save this article

Partial Characterization of Optimal Hedging Point Policies in Unreliable Two-Part-Type Manufacturing Systems

Author

Listed:
  • N. Srivatsan

    (Intel Corporation, Chandler, Arizona)

  • Yves Dallery

    (Université Pierre et Marie Curie, Paris, France)

Abstract

The production control problem in unreliable manufacturing systems has generated a great deal of interest recently. The goal is the real-time calculation of production rates to minimize total expected surplus and backlog costs in a production system. A class of feedback control policies, called hedging point policies, has been studied in literature and shown to be optimal for certain single-part-type systems. This paper focuses mainly on the performance of hedging point policies in two-part-type systems. We first generalize known stability results for hedging point policies in single-part-type systems and extend them to two-part-type systems. An average cost analysis of trajectories is then used to partially characterize an optimal policy belonging to this class. A complete characterization is obtained for special parameter values. The results in this paper provide insights for designing simple yet effective heuristics for controlling manufacturing systems producing many part-types.

Suggested Citation

  • N. Srivatsan & Yves Dallery, 1998. "Partial Characterization of Optimal Hedging Point Policies in Unreliable Two-Part-Type Manufacturing Systems," Operations Research, INFORMS, vol. 46(1), pages 36-45, February.
    • Handle: RePEc:inm:oropre:v:46:y:1998:i:1:p:36-45
    DOI: 10.1287/opre.46.1.36
    as

    Download full text from publisher

    File URL: http://dx.doi.org/10.1287/opre.46.1.36
    Download Restriction: no
    File URL: https://libkey.io/10.1287/opre.46.1.36?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Michael H. Veatch & Lawrence M. Wein, 1996. "Scheduling a Make-To-Stock Queue: Index Policies and Hedging Points," Operations Research, INFORMS, vol. 44(4), pages 634-647, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Polotski, V. & Kenne, J.-P. & Gharbi, A., 2019. "Joint production and maintenance optimization in flexible hybrid Manufacturing–Remanufacturing systems under age-dependent deterioration," International Journal of Production Economics, Elsevier, vol. 216(C), pages 239-254.
    2. Vladimir Polotski & Jean-Pierre Kenne & Ali Gharbi, 2017. "Set-up and production planning in hybrid manufacturing–remanufacturing systems with large returns," International Journal of Production Research, Taylor & Francis Journals, vol. 55(13), pages 3766-3787, July.
    3. Chen Shaoxiang, 2004. "The Optimality of Hedging Point Policies for Stochastic Two-Product Flexible Manufacturing Systems," Operations Research, INFORMS, vol. 52(2), pages 312-322, April.
    4. Francis De Vericourt & Fikri Karaesmen & Yves Dallery, 2000. "Dynamic Scheduling in a Make-to-Stock System: A Partial Characterization of Optimal Policies," Operations Research, INFORMS, vol. 48(5), pages 811-819, October.
    5. S. P. Sethi & H. Yan & H. Zhang & Q. Zhang, 2002. "Optimal and Hierarchical Controls in Dynamic Stochastic Manufacturing Systems: A Survey," Manufacturing & Service Operations Management, INFORMS, vol. 4(2), pages 133-170.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jemai, Zied & Karaesmen, Fikri, 2005. "The influence of demand variability on the performance of a make-to-stock queue," European Journal of Operational Research, Elsevier, vol. 164(1), pages 195-205, July.
    2. Zerhouni, Hichem & Gayon, Jean-Philippe & Frein, Yannick, 2013. "Influence of dependency between demands and returns in a reverse logistics system," International Journal of Production Economics, Elsevier, vol. 143(1), pages 62-71.
    3. Chao, Gary H., 2013. "Production and availability policies through the Markov Decision Process and myopic methods for contractual and selective orders," European Journal of Operational Research, Elsevier, vol. 225(3), pages 383-392.
    4. Arts, Joachim, 2017. "A multi-item approach to repairable stocking and expediting in a fluctuating demand environment," European Journal of Operational Research, Elsevier, vol. 256(1), pages 102-115.
    5. Zhou, Bin & Zhao, Yao & Katehakis, Michael N., 2007. "Effective control policies for stochastic inventory systems with a minimum order quantity and linear costs," International Journal of Production Economics, Elsevier, vol. 106(2), pages 523-531, April.
    6. Arreola-Risa, Antonio & Giménez-García, Víctor M. & Martínez-Parra, José Luis, 2011. "Optimizing stochastic production-inventory systems: A heuristic based on simulation and regression analysis," European Journal of Operational Research, Elsevier, vol. 213(1), pages 107-118, August.
    7. Hongler, Max-Olivier & Ciprut, Philippe, 2001. "Production indices obtained by a myopic policy for non-Markovian dynamics," International Journal of Production Economics, Elsevier, vol. 74(1-3), pages 115-123, December.
    8. Gayon, Jean-Philippe & Vercraene, Samuel & Flapper, Simme Douwe P., 2017. "Optimal control of a production-inventory system with product returns and two disposal options," European Journal of Operational Research, Elsevier, vol. 262(2), pages 499-508.
    9. Sanajian, Nima & BalcIog[small tilde]lu, BarIs, 2009. "The impact of production time variability on make-to-stock queue performance," European Journal of Operational Research, Elsevier, vol. 194(3), pages 847-855, May.
    10. Rezaei Somarin, Aghil & Chen, Songlin & Asian, Sobhan & Wang, David Z.W., 2017. "A heuristic stock allocation rule for repairable service parts," International Journal of Production Economics, Elsevier, vol. 184(C), pages 131-140.
    11. Flapper, Simme Douwe & Gayon, Jean-Philippe & Lim, Lâm Laurent, 2014. "On the optimal control of manufacturing and remanufacturing activities with a single shared server," European Journal of Operational Research, Elsevier, vol. 234(1), pages 86-98.
    12. ElHafsi, Mohsen & Fang, Jianxin & Camus, Herve, 2018. "Optimal control of a continuous-time W-configuration assemble-to-order system," European Journal of Operational Research, Elsevier, vol. 267(3), pages 917-932.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:inm:oropre:v:46:y:1998:i:1:p:36-45. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Asher (email available below). General contact details of provider: https://edirc.repec.org/data/inforea.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.