IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v143y2013i1p62-71.html
   My bibliography  Save this article

Influence of dependency between demands and returns in a reverse logistics system

Author

Listed:
  • Zerhouni, Hichem
  • Gayon, Jean-Philippe
  • Frein, Yannick

Abstract

We consider two reverse logistics systems where returned products are as good as new. For the first system, the product return flow is independent of the demand flow. We prove that the optimal policy is of base-stock type and we establish monotonicity results for the optimal base-stock levels, with respect to the system parameters (arrival rate, production rate, return rate, production cost, lost-sale cost, return cost and holding cost). We also provide an efficient algorithm to compute the optimal base-stock level. For the second system, demands and returns are strongly correlated: a satisfied demand induces a product return after a stochastic return lead-time, with a certain probability. When the return lead-time is null, we extend the results obtained for the first system. When the return lead-time is positive, the optimal control problem is more complex and we do not prove that the optimal policy is of base-stock type. However, we provide a framework to analyse base-stock policies. Finally, we carry out a numerical study on many scenarios to investigate the impact of ignoring dependency between demands and returns. We observe that ignoring this dependency yields to non-negligible cost increase.

Suggested Citation

  • Zerhouni, Hichem & Gayon, Jean-Philippe & Frein, Yannick, 2013. "Influence of dependency between demands and returns in a reverse logistics system," International Journal of Production Economics, Elsevier, vol. 143(1), pages 62-71.
    • Handle: RePEc:eee:proeco:v:143:y:2013:i:1:p:62-71
    DOI: 10.1016/j.ijpe.2010.10.014
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S092552731000407X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2010.10.014?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kiesmuller, Gudrun P. & van der Laan, Erwin A., 2001. "An inventory model with dependent product demands and returns," International Journal of Production Economics, Elsevier, vol. 72(1), pages 73-87, June.
    2. Gregory DeCroix & Jing-Sheng Song & Paul Zipkin, 2005. "A Series System with Returns: Stationary Analysis," Operations Research, INFORMS, vol. 53(2), pages 350-362, April.
    3. Fleischmann, Moritz & Kuik, Roelof & Dekker, Rommert, 2002. "Controlling inventories with stochastic item returns: A basic model," European Journal of Operational Research, Elsevier, vol. 138(1), pages 63-75, April.
    4. Albert Y. Ha, 1997. "Inventory Rationing in a Make-to-Stock Production System with Several Demand Classes and Lost Sales," Management Science, INFORMS, vol. 43(8), pages 1093-1103, August.
    5. Gregory A. DeCroix & Paul H. Zipkin, 2005. "Inventory Management for an Assembly System with Product or Component Returns," Management Science, INFORMS, vol. 51(8), pages 1250-1265, August.
    6. Fleischmann, Moritz & Kuik, Roelof, 2003. "On optimal inventory control with independent stochastic item returns," European Journal of Operational Research, Elsevier, vol. 151(1), pages 25-37, November.
    7. Michael H. Veatch & Lawrence M. Wein, 1996. "Scheduling a Make-To-Stock Queue: Index Policies and Hedging Points," Operations Research, INFORMS, vol. 44(4), pages 634-647, August.
    8. Fleischmann, Moritz & Bloemhof-Ruwaard, Jacqueline M. & Dekker, Rommert & van der Laan, Erwin & van Nunen, Jo A. E. E. & Van Wassenhove, Luk N., 1997. "Quantitative models for reverse logistics: A review," European Journal of Operational Research, Elsevier, vol. 103(1), pages 1-17, November.
    9. Cheung, Ki Ling & Yuan, Xue-Ming, 2003. "An infinite horizon inventory model with periodic order commitment," European Journal of Operational Research, Elsevier, vol. 146(1), pages 52-66, April.
    10. de Brito, Marisa P. & Dekker, Rommert, 2003. "Modelling product returns in inventory control--exploring the validity of general assumptions," International Journal of Production Economics, Elsevier, vol. 81(1), pages 225-241, January.
    11. Vincent P. Simpson, 1978. "Optimum Solution Structure for a Repairable Inventory Problem," Operations Research, INFORMS, vol. 26(2), pages 270-281, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tianji Yang & Chao Fu & Xinbao Liu & Jun Pei & Lin Liu & Panos M. Pardalos, 2018. "Closed-loop supply chain inventory management with recovery information of reusable containers," Journal of Combinatorial Optimization, Springer, vol. 35(1), pages 266-292, January.
    2. Elia, Valerio & Gnoni, Maria Grazia, 2015. "Designing an effective closed loop system for pallet management," International Journal of Production Economics, Elsevier, vol. 170(PC), pages 730-740.
    3. Iassinovskaia, Galina & Limbourg, Sabine & Riane, Fouad, 2017. "The inventory-routing problem of returnable transport items with time windows and simultaneous pickup and delivery in closed-loop supply chains," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 570-582.
    4. Goedhart, Joost & Haijema, René & Akkerman, Renzo, 2023. "Modelling the influence of returns for an omni-channel retailer," European Journal of Operational Research, Elsevier, vol. 306(3), pages 1248-1263.
    5. Xiong, Yu & Li, Gendao & Zhou, Yu & Fernandes, Kiran & Harrison, Richard & Xiong, Zhongkai, 2014. "Dynamic pricing models for used products in remanufacturing with lost-sales and uncertain quality," International Journal of Production Economics, Elsevier, vol. 147(PC), pages 678-688.
    6. Gökbayrak, Esra & Kayış, Enis, 2023. "Single item periodic review inventory control with sales dependent stochastic return flows," International Journal of Production Economics, Elsevier, vol. 255(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gregory A. DeCroix, 2006. "Optimal Policy for a Multiechelon Inventory System with Remanufacturing," Operations Research, INFORMS, vol. 54(3), pages 532-543, June.
    2. Gregory A. DeCroix & Jing-Sheng Song & Paul H. Zipkin, 2009. "Managing an Assemble-to-Order System with Returns," Manufacturing & Service Operations Management, INFORMS, vol. 11(1), pages 144-159, October.
    3. Gregory A. DeCroix & Paul H. Zipkin, 2005. "Inventory Management for an Assembly System with Product or Component Returns," Management Science, INFORMS, vol. 51(8), pages 1250-1265, August.
    4. Vercraene, Samuel & Gayon, Jean-Philippe, 2013. "Optimal control of a production-inventory system with productreturns," International Journal of Production Economics, Elsevier, vol. 142(2), pages 302-310.
    5. Gökbayrak, Esra & Kayış, Enis, 2023. "Single item periodic review inventory control with sales dependent stochastic return flows," International Journal of Production Economics, Elsevier, vol. 255(C).
    6. Flapper, Simme Douwe & Gayon, Jean-Philippe & Lim, Lâm Laurent, 2014. "On the optimal control of manufacturing and remanufacturing activities with a single shared server," European Journal of Operational Research, Elsevier, vol. 234(1), pages 86-98.
    7. Xuanming Su, 2009. "Consumer Returns Policies and Supply Chain Performance," Manufacturing & Service Operations Management, INFORMS, vol. 11(4), pages 595-612, March.
    8. de Brito, Marisa P. & Dekker, Rommert, 2003. "Modelling product returns in inventory control--exploring the validity of general assumptions," International Journal of Production Economics, Elsevier, vol. 81(1), pages 225-241, January.
    9. Tsiliyannis, Christos Aristeides, 2018. "Markov chain modeling and forecasting of product returns in remanufacturing based on stock mean-age," European Journal of Operational Research, Elsevier, vol. 271(2), pages 474-489.
    10. Zolfagharinia, Hossein & Hafezi, Maryam & Farahani, Reza Zanjirani & Fahimnia, Behnam, 2014. "A hybrid two-stock inventory control model for a reverse supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 67(C), pages 141-161.
    11. Gregory DeCroix & Jing-Sheng Song & Paul Zipkin, 2005. "A Series System with Returns: Stationary Analysis," Operations Research, INFORMS, vol. 53(2), pages 350-362, April.
    12. Goedhart, Joost & Haijema, René & Akkerman, Renzo, 2023. "Modelling the influence of returns for an omni-channel retailer," European Journal of Operational Research, Elsevier, vol. 306(3), pages 1248-1263.
    13. Feng, Yan & Viswanathan, S., 2014. "Heuristics with guaranteed performance bounds for a manufacturing system with product recovery," European Journal of Operational Research, Elsevier, vol. 232(2), pages 322-329.
    14. Xiting Gong & Xiuli Chao, 2013. "Technical Note---Optimal Control Policy for Capacitated Inventory Systems with Remanufacturing," Operations Research, INFORMS, vol. 61(3), pages 603-611, June.
    15. Gou, Qinglong & Liang, Liang & Huang, Zhimin & Xu, Chuanyong, 2008. "A joint inventory model for an open-loop reverse supply chain," International Journal of Production Economics, Elsevier, vol. 116(1), pages 28-42, November.
    16. Shi, Jianmai & Zhang, Guoqing & Sha, Jichang, 2011. "Optimal production and pricing policy for a closed loop system," Resources, Conservation & Recycling, Elsevier, vol. 55(6), pages 639-647.
    17. Zhou, Li & Xie, Jiaping & Gu, Xiaoyu & Lin, Yong & Ieromonachou, Petros & Zhang, Xiaole, 2016. "Forecasting return of used products for remanufacturing using Graphical Evaluation and Review Technique (GERT)," International Journal of Production Economics, Elsevier, vol. 181(PB), pages 315-324.
    18. Wei, Cansheng & Li, Yongjian & Cai, Xiaoqiang, 2011. "Robust optimal policies of production and inventory with uncertain returns and demand," International Journal of Production Economics, Elsevier, vol. 134(2), pages 357-367, December.
    19. Perez Becker, Nicole & Arts, Joachim & Reichardt, Sven & Lange, Anne, 2024. "Managing inventories of reusable containers for food take-away at a restaurant," International Journal of Production Economics, Elsevier, vol. 267(C).
    20. Wenting Pan & Candice H. Huynh, 2023. "Optimal operational strategies for online retailers with demand and return uncertainty," Operations Management Research, Springer, vol. 16(2), pages 755-767, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:143:y:2013:i:1:p:62-71. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.