IDEAS home Printed from https://ideas.repec.org/a/ibn/masjnl/v9y2015i7p140.html
   My bibliography  Save this article

Feed Plate and Feed Adsorbent Temperature Optimisation of Distillation – Adsorption Process to Produce Absolute Ethanol

Author

Listed:
  • Fadlilatul Taufany
  • Nonot Soewarno
  • Koko Yuwono
  • Dimas Ardiyanta
  • Melvina Eliana
  • Indi Raisa Girsang

Abstract

Two subsequent separation processes are required to produce absolute ethanol (at least purity of 99.5% v/v),namely the distillation and adsorption processes. Thus, it is important to find the optimum operation conditionfor those following processes. The aims of the present study are to optimize the feed plate of distillation and thetemperature of feed adsorbent. This study is conducted using a continuous sieve tray distillation system with thenumber of 16 trays, the length-diameter ratio of 80.64, the reflux ratio of 3.5, and the feed with ethanol contentof 10 % v/v ethanol, which is produced via the fermentation process of molasses. To conduct the first aim of thisstudy, the feed enters the distillation column with several of variable feed plate, i.e. 12, 13, 14, and 15. This feedplate location is calculated from the top of the column. On the other hand, the second aim of this study, isconducted using the subsequent combination of distillation and adsorbent columns, where the distillate (purity ofethanol around 95% v/v) from the distillation column is then flowed into the adsorbent column with various feedadsorbent temperature, i.e. 80 °C, 90 °C, 100 °C, and 110 °C, to be purified as an absolute ethanol. Here theadsorbent column is designed as a fix bed adsorption column with a molecular sieve of 3A (zeolite) is used as anadsorbent for that purification process. Our results showed that the optimum feed plate is 14, because at thisplate the ethanol distillate has the highest content among those various variables. Meanwhile, the optimumtemperature of feed adsorbent is 90° C, which requires the least energy for the distillation - adsorption process,i.e. at 18691 kJ/kg absolute ethanol. This primary study is expected to be an alternative way to optimize theoperating condition of the sieve tray distillation-molecular sieve adsorption system by means of acquiring aminimum energy involving in the process to achieve the highest purity of ethanol.

Suggested Citation

  • Fadlilatul Taufany & Nonot Soewarno & Koko Yuwono & Dimas Ardiyanta & Melvina Eliana & Indi Raisa Girsang, 2015. "Feed Plate and Feed Adsorbent Temperature Optimisation of Distillation – Adsorption Process to Produce Absolute Ethanol," Modern Applied Science, Canadian Center of Science and Education, vol. 9(7), pages 140-140, July.
  • Handle: RePEc:ibn:masjnl:v:9:y:2015:i:7:p:140
    as

    Download full text from publisher

    File URL: https://ccsenet.org/journal/index.php/mas/article/download/50823/27271
    Download Restriction: no

    File URL: https://ccsenet.org/journal/index.php/mas/article/view/50823
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Kumar, Santosh & Singh, Neetu & Prasad, Ram, 2010. "Anhydrous ethanol: A renewable source of energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1830-1844, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Małgorzata Hawrot-Paw & Aleksander Stańczuk, 2022. "From Waste Biomass to Cellulosic Ethanol by Separate Hydrolysis and Fermentation (SHF) with Trichoderma viride," Sustainability, MDPI, vol. 15(1), pages 1-10, December.
    2. Musaab O. El-Faroug & Fuwu Yan & Maji Luo & Richard Fiifi Turkson, 2016. "Spark Ignition Engine Combustion, Performance and Emission Products from Hydrous Ethanol and Its Blends with Gasoline," Energies, MDPI, vol. 9(12), pages 1-24, November.
    3. Aditiya, H.B. & Mahlia, T.M.I. & Chong, W.T. & Nur, Hadi & Sebayang, A.H., 2016. "Second generation bioethanol production: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 66(C), pages 631-653.
    4. Han, Dandan & E, Jiaqiang & Deng, Yuanwang & Chen, Jingwei & Leng, Erwei & Liao, Gaoliang & Zhao, Xiaohuan & Feng, Changling & Zhang, Feng, 2021. "A review of studies using hydrocarbon adsorption material for reducing hydrocarbon emissions from cold start of gasoline engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    5. Tgarguifa, Ahmed & Abderafi, Souad & Bounahmidi, Tijani, 2018. "Energy efficiency improvement of a bioethanol distillery, by replacing a rectifying column with a pervaporation unit," Renewable Energy, Elsevier, vol. 122(C), pages 239-250.
    6. Carlos Alberto Torres Cantero & Guadalupe Lopez Lopez & Victor M. Alvarado & Ricardo F. Escobar Jimenez & Jesse Y. Rumbo Morales & Eduardo M. Sanchez Coronado, 2017. "Control Structures Evaluation for a Salt Extractive Distillation Pilot Plant: Application to Bio-Ethanol Dehydration," Energies, MDPI, vol. 10(9), pages 1-29, August.
    7. Ashraf Elfasakhany, 2021. "State of Art of Using Biofuels in Spark Ignition Engines," Energies, MDPI, vol. 14(3), pages 1-26, February.
    8. Zhenbin Chen & Jiaojun Deng & Haisheng Zhen & Chenyu Wang & Li Wang, 2022. "Experimental Investigation of Hydrous Ethanol Gasoline on Engine Noise, Cyclic Variations and Combustion Characteristics," Energies, MDPI, vol. 15(5), pages 1-17, February.
    9. Saad Ahmad & Ali Turab Jafry & Muteeb ul Haq & Naseem Abbas & Huma Ajab & Arif Hussain & Uzair Sajjad, 2023. "Performance and Emission Characteristics of Second-Generation Biodiesel with Oxygenated Additives," Energies, MDPI, vol. 16(13), pages 1-33, July.
    10. Che Mat, S. & Idroas, M.Y. & Teoh, Y.H. & Hamid, M.F. & Sharudin, H. & Pahmi, M.A.A.H., 2022. "Optimization of ternary blends among refined palm oil-hexanol-melaleuca cajuputi oil and engine emissions analysis of the blends," Renewable Energy, Elsevier, vol. 196(C), pages 451-461.
    11. Kun-Ho Chen & Yei-Chin Chao, 2019. "Characterization of Performance of Short Stroke Engines with Valve Timing for Blended Bioethanol Internal Combustion," Energies, MDPI, vol. 12(4), pages 1-13, February.
    12. Thangavelu, Saravana Kannan & Ahmed, Abu Saleh & Ani, Farid Nasir, 2016. "Review on bioethanol as alternative fuel for spark ignition engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 820-835.
    13. Malik, Arunima & Lenzen, Manfred & Ely, Rômulo Neves & Dietzenbacher, Erik, 2014. "Simulating the impact of new industries on the economy: The case of biorefining in Australia," Ecological Economics, Elsevier, vol. 107(C), pages 84-93.
    14. Tgarguifa, Ahmed & Abderafi, Souad & Bounahmidi, Tijani, 2017. "Energetic optimization of Moroccan distillery using simulation and response surface methodology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 415-425.
    15. Amber M. Yeoman & Marvin Shaw & Martyn Ward & Lyndsay Ives & Stephen J. Andrews & Alastair C. Lewis, 2023. "Gas Phase Emissions of Volatile Organic Compounds Arising from the Application of Sunscreens," IJERPH, MDPI, vol. 20(11), pages 1-17, May.
    16. Masum, B.M. & Masjuki, H.H. & Kalam, M.A. & Rizwanul Fattah, I.M. & Palash, S.M. & Abedin, M.J., 2013. "Effect of ethanol–gasoline blend on NOx emission in SI engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 209-222.
    17. Chong, Ting Yen & Cheah, Siang Aun & Ong, Chin Tye & Wong, Lee Yi & Goh, Chern Rui & Tan, Inn Shi & Foo, Henry Chee Yew & Lam, Man Kee & Lim, Steven, 2020. "Techno-economic evaluation of third-generation bioethanol production utilizing the macroalgae waste: A case study in Malaysia," Energy, Elsevier, vol. 210(C).

    More about this item

    JEL classification:

    • R00 - Urban, Rural, Regional, Real Estate, and Transportation Economics - - General - - - General
    • Z0 - Other Special Topics - - General

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:ibn:masjnl:v:9:y:2015:i:7:p:140. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Canadian Center of Science and Education (email available below). General contact details of provider: https://edirc.repec.org/data/cepflch.html .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.