IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i12p9483-d1169914.html
   My bibliography  Save this article

Is Loose-Fill Plastic Waste an Opportunity for Thermal Insulation in Cold and Humid Tropical Climates?

Author

Listed:
  • Bruno Malet-Damour

    (PIMENT Laboratory, University of Reunion Island, 97430 Le Tampon, France
    Current address: 120 Avenue Raymond Barre, 97430 Le Tampon, France.)

  • Jean-Pierre Habas

    (ICGM, CNRS, ENSCM, University Montpellier, 34293 Montpellier, France)

  • Dimitri Bigot

    (PIMENT Laboratory, University of Reunion Island, 97430 Le Tampon, France)

Abstract

This paper addresses the plastic waste management challenge by proposing a sustainable solution for the building sector. The proposed solution uses Loose-Fill Plastic Waste (LFPW) as a thermal insulation material, the world’s first in plastic waste recovery. To investigate the potential of this new path, an experimental study was conducted on test cells in Reunion Island’s cold and wet climate. It was revealed that LFPW (size between 3 and 4 mm with 8 cm thickness) can reduce surface temperatures by nearly 3.2 °C, with a maximum difference by almost 22.2 °C. The thermal phase shift is significant (190 mn) and comparable to conventional thermal insulation solutions. The study results suggest that LFPW can provide an effective and economical solution to the challenge of plastic waste management while promoting sustainable development.

Suggested Citation

  • Bruno Malet-Damour & Jean-Pierre Habas & Dimitri Bigot, 2023. "Is Loose-Fill Plastic Waste an Opportunity for Thermal Insulation in Cold and Humid Tropical Climates?," Sustainability, MDPI, vol. 15(12), pages 1-19, June.
  • Handle: RePEc:gam:jsusta:v:15:y:2023:i:12:p:9483-:d:1169914
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/12/9483/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/15/12/9483/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Djongyang, Noël & Tchinda, René & Njomo, Donatien, 2010. "Thermal comfort: A review paper," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2626-2640, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gentiel Acar & Marijke Steeman & Nathan Van Den Bossche, 2024. "Reusing Thermal Insulation Materials: Reuse Potential and Durability Assessment of Stone Wool Insulation in Flat Roofs," Sustainability, MDPI, vol. 16(4), pages 1-22, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Laura J. Elstub & Shimra J. Fine & Karl E. Zelik, 2021. "Exoskeletons and Exosuits Could Benefit from Mode-Switching Body Interfaces That Loosen/Tighten to Improve Thermal Comfort," IJERPH, MDPI, vol. 18(24), pages 1-12, December.
    2. Ribeiro, Thatiana Jessica da Silva & Mady, Carlos Eduardo Keutenedjian, 2022. "Comparison among exergy analysis methods applied to a human body thermal model," Energy, Elsevier, vol. 239(PE).
    3. Djamila, Harimi, 2017. "Indoor thermal comfort predictions: Selected issues and trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 569-580.
    4. Francesco Asdrubali & Cinzia Buratti & Franco Cotana & Giorgio Baldinelli & Michele Goretti & Elisa Moretti & Catia Baldassarri & Elisa Belloni & Francesco Bianchi & Antonella Rotili & Marco Vergoni &, 2013. "Evaluation of Green Buildings’ Overall Performance through in Situ Monitoring and Simulations," Energies, MDPI, vol. 6(12), pages 1-23, December.
    5. Amir Faraji & Maria Rashidi & Fatemeh Rezaei & Payam Rahnamayiezekavat, 2023. "A Meta-Synthesis Review of Occupant Comfort Assessment in Buildings (2002–2022)," Sustainability, MDPI, vol. 15(5), pages 1-36, February.
    6. Feng, Yanxiao & Liu, Shichao & Wang, Julian & Yang, Jing & Jao, Ying-Ling & Wang, Nan, 2022. "Data-driven personal thermal comfort prediction: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    7. Michael Short & Sergio Rodriguez & Richard Charlesworth & Tracey Crosbie & Nashwan Dawood, 2019. "Optimal Dispatch of Aggregated HVAC Units for Demand Response: An Industry 4.0 Approach," Energies, MDPI, vol. 12(22), pages 1-20, November.
    8. Van Craenendonck, Stijn & Lauriks, Leen & Vuye, Cedric & Kampen, Jarl, 2018. "A review of human thermal comfort experiments in controlled and semi-controlled environments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3365-3378.
    9. Enescu, Diana, 2017. "A review of thermal comfort models and indicators for indoor environments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1353-1379.
    10. Escandón, Rocío & Suárez, Rafael & Sendra, Juan José, 2019. "Field assessment of thermal comfort conditions and energy performance of social housing: The case of hot summers in the Mediterranean climate," Energy Policy, Elsevier, vol. 128(C), pages 377-392.
    11. Azar, Elie & Nikolopoulou, Christina & Papadopoulos, Sokratis, 2016. "Integrating and optimizing metrics of sustainable building performance using human-focused agent-based modeling," Applied Energy, Elsevier, vol. 183(C), pages 926-937.
    12. Haider Latif & Samira Rahnama & Alessandro Maccarini & Goran Hultmark & Peter V. Nielsen & Alireza Afshari, 2022. "Precision Ventilation in an Open-Plan Office: A New Application of Active Chilled Beam (ACB) with a JetCone Feature," Sustainability, MDPI, vol. 14(7), pages 1-17, April.
    13. Omar al-Ani & Sanjoy Das & Hongyu Wu, 2023. "Imitation Learning with Deep Attentive Tabular Neural Networks for Environmental Prediction and Control in Smart Home," Energies, MDPI, vol. 16(13), pages 1-19, June.
    14. Pilechiha, Peiman & Mahdavinejad, Mohammadjavad & Pour Rahimian, Farzad & Carnemolla, Phillippa & Seyedzadeh, Saleh, 2020. "Multi-objective optimisation framework for designing office windows: quality of view, daylight and energy efficiency," Applied Energy, Elsevier, vol. 261(C).
    15. Yuan, Jihui & Huang, Pei & Chai, Jiale, 2022. "Development of a calibrated typical meteorological year weather file in system design of zero-energy building for performance improvements," Energy, Elsevier, vol. 259(C).
    16. Verbeke, Stijn & Audenaert, Amaryllis, 2018. "Thermal inertia in buildings: A review of impacts across climate and building use," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2300-2318.
    17. Hsiao-Chi Nieh & Shu-Fen Su, 2018. "Forced-Air Warming for Rewarming and Comfort Following Laparoscopy: A Randomized Controlled Trail," Clinical Nursing Research, , vol. 27(5), pages 540-559, June.
    18. Hongyu Du & Fengqi Zhou & Wenbo Cai & Yongli Cai & Yanqing Xu, 2021. "Thermal and Humidity Effect of Urban Green Spaces with Different Shapes: A Case Study of Shanghai, China," IJERPH, MDPI, vol. 18(11), pages 1-13, June.
    19. Giovanni Bianco & Stefano Bracco & Federico Delfino & Lorenzo Gambelli & Michela Robba & Mansueto Rossi, 2020. "A Building Energy Management System Based on an Equivalent Electric Circuit Model," Energies, MDPI, vol. 13(7), pages 1-23, April.
    20. Pisello, A.L. & Pigliautile, I. & Andargie, M. & Berger, C. & Bluyssen, P.M. & Carlucci, S. & Chinazzo, G. & Deme Belafi, Z. & Dong, B. & Favero, M. & Ghahramani, A. & Havenith, G. & Heydarian, A. & K, 2021. "Test rooms to study human comfort in buildings: A review of controlled experiments and facilities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:12:p:9483-:d:1169914. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.