IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i20p12963-d938571.html
   My bibliography  Save this article

Electric Kettles: An Assessment of Energy-Saving Potentials for Policy Making in the European Union

Author

Listed:
  • Antoine Durand

    (Fraunhofer Institute for Systems and Innovation Research ISI, 76139 Karlsruhe, Germany)

  • Simon Hirzel

    (Fraunhofer Institute for Systems and Innovation Research ISI, 76139 Karlsruhe, Germany)

  • Clemens Rohde

    (Fraunhofer Institute for Systems and Innovation Research ISI, 76139 Karlsruhe, Germany)

  • Marcel Gebele

    (Fraunhofer Institute for Systems and Innovation Research ISI, 76139 Karlsruhe, Germany)

  • Carlos Lopes

    (The Swedish Energy Agency, 631 04 Eskilstuna, Sweden)

  • Emma Olsson

    (The Swedish Energy Agency, 631 04 Eskilstuna, Sweden)

  • Robin Barkhausen

    (Fraunhofer Institute for Systems and Innovation Research ISI, 76139 Karlsruhe, Germany)

Abstract

Electric kettles are found in almost every household in the European Union. Within the preparatory study to establish the Ecodesign Working Plan 2015–2017, the electricity consumption of this product group in Europe was estimated at 20 to 33 TWh in 2012, with an energy-saving potential of more than 20%. This led to an Ecodesign preparatory study on kettles in 2020 to analyse the potential role of environmental policy-making for electric kettles in Europe in more detail. Based on elements from this study, this paper reviews worldwide policies covering this product group, methods to assess its energy efficiency and analyses of the potential of technical improvements to enhance energy efficiency. A method is suggested for measuring the power of kettles, and corresponding power-temperature measurements of selected kettles are presented. Overall, the findings indicate that technical optimization alone has a limited potential to improve the energy efficiency of kettles and to highlight the absence of a standard for measuring the energy consumption of electric kettles. However, user-related aspects of operating kettles offer a substantial saving potential. Heating too much water or at higher than required temperatures increase the energy consumption and related energy costs of private households. This could provide leverage for policy makers to improve the market and to reduce the environmental impact of this product group beyond mere technical optimization of energy efficiency, including aspects related to circular economy and energy sufficiency.

Suggested Citation

  • Antoine Durand & Simon Hirzel & Clemens Rohde & Marcel Gebele & Carlos Lopes & Emma Olsson & Robin Barkhausen, 2022. "Electric Kettles: An Assessment of Energy-Saving Potentials for Policy Making in the European Union," Sustainability, MDPI, vol. 14(20), pages 1-17, October.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:20:p:12963-:d:938571
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/20/12963/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/20/12963/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Murray, D.M. & Liao, J. & Stankovic, L. & Stankovic, V., 2016. "Understanding usage patterns of electric kettle and energy saving potential," Applied Energy, Elsevier, vol. 171(C), pages 231-242.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sonia Sandez & Valeria Ibáñez‐Forés & Victoria Pérez‐Belis & Pablo Juan & María D. Bovea, 2023. "Consumer practices regarding the purchase, use, willingness to repair, and disposal of small electric and electronic equipment: A Spanish survey on kettles," Journal of Industrial Ecology, Yale University, vol. 27(6), pages 1613-1625, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jia, Kunqi & Guo, Ge & Xiao, Jucheng & Zhou, Huan & Wang, Zhihua & He, Guangyu, 2019. "Data compression approach for the home energy management system," Applied Energy, Elsevier, vol. 247(C), pages 643-656.
    2. Liu, Bo & Luan, Wenpeng & Yu, Yixin, 2017. "Dynamic time warping based non-intrusive load transient identification," Applied Energy, Elsevier, vol. 195(C), pages 634-645.
    3. Du, Feng & Zhang, Jiangfeng & Li, Hailong & Yan, Jinyue & Galloway, Stuart & Lo, Kwok L., 2016. "Modelling the impact of social network on energy savings," Applied Energy, Elsevier, vol. 178(C), pages 56-65.
    4. Stankovic, L. & Stankovic, V. & Liao, J. & Wilson, C., 2016. "Measuring the energy intensity of domestic activities from smart meter data," Applied Energy, Elsevier, vol. 183(C), pages 1565-1580.
    5. Du, Feng & Yue, Hong & Zhang, Jiangfeng, 2023. "Influence of advertisement control to residential energy savings in large networks," Applied Energy, Elsevier, vol. 333(C).
    6. Li, Guannan & Hu, Yunpeng & Chen, Huanxin & Li, Haorong & Hu, Min & Guo, Yabin & Liu, Jiangyan & Sun, Shaobo & Sun, Miao, 2017. "Data partitioning and association mining for identifying VRF energy consumption patterns under various part loads and refrigerant charge conditions," Applied Energy, Elsevier, vol. 185(P1), pages 846-861.
    7. Sonia Sandez & Valeria Ibáñez‐Forés & Victoria Pérez‐Belis & Pablo Juan & María D. Bovea, 2023. "Consumer practices regarding the purchase, use, willingness to repair, and disposal of small electric and electronic equipment: A Spanish survey on kettles," Journal of Industrial Ecology, Yale University, vol. 27(6), pages 1613-1625, December.
    8. Ahmadi-Karvigh, Simin & Ghahramani, Ali & Becerik-Gerber, Burcin & Soibelman, Lucio, 2018. "Real-time activity recognition for energy efficiency in buildings," Applied Energy, Elsevier, vol. 211(C), pages 146-160.
    9. Zhao, Bochao & Ye, Minxiang & Stankovic, Lina & Stankovic, Vladimir, 2020. "Non-intrusive load disaggregation solutions for very low-rate smart meter data," Applied Energy, Elsevier, vol. 268(C).
    10. Rashid, Haroon & Singh, Pushpendra & Stankovic, Vladimir & Stankovic, Lina, 2019. "Can non-intrusive load monitoring be used for identifying an appliance’s anomalous behaviour?," Applied Energy, Elsevier, vol. 238(C), pages 796-805.
    11. Yilmaz, S. & Majcen, D. & Heidari, M. & Mahmoodi, J. & Brosch, T. & Patel, M.K., 2019. "Analysis of the impact of energy efficiency labelling and potential changes on electricity demand reduction of white goods using a stock model: The case of Switzerland," Applied Energy, Elsevier, vol. 239(C), pages 117-132.
    12. Liu, Chao & Akintayo, Adedotun & Jiang, Zhanhong & Henze, Gregor P. & Sarkar, Soumik, 2018. "Multivariate exploration of non-intrusive load monitoring via spatiotemporal pattern network," Applied Energy, Elsevier, vol. 211(C), pages 1106-1122.
    13. Andersen, Frits Møller & Baldini, Mattia & Hansen, Lars Gårn & Jensen, Carsten Lynge, 2017. "Households’ hourly electricity consumption and peak demand in Denmark," Applied Energy, Elsevier, vol. 208(C), pages 607-619.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:20:p:12963-:d:938571. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.