IDEAS home Printed from https://ideas.repec.org/a/gam/jmathe/v11y2023i19p4137-d1251756.html
   My bibliography  Save this article

Analysis of the Influence of Calculation Parameters on the Design of the Gearbox of a High-Power Wind Turbine

Author

Listed:
  • Francisco Rubio

    (Mechanical and Biomechanical Engineering University Research Institute, Universitat Politècnica de València, Camí de Vera s/n, 46022 Valencia, Spain)

  • Carlos Llopis-Albert

    (Mechanical and Biomechanical Engineering University Research Institute, Universitat Politècnica de València, Camí de Vera s/n, 46022 Valencia, Spain)

  • Ana M. Pedrosa

    (Mechanical and Biomechanical Engineering University Research Institute, Universitat Politècnica de València, Camí de Vera s/n, 46022 Valencia, Spain)

Abstract

As wind turbine power requirements have evolved from the order of kilowatts (kWs) to the order of several megawatts (MWs), wind turbine components have been subjected to more demanding and critical operating conditions. The wind turbine must cope with higher wind loads due to larger blade sizes, which are also time-varying, and, ultimately, higher power levels. One of the challenges in the manufacture of high-power wind turbines lies in the gearbox and consists of achieving ever-greater power density without compromising efficiency, i.e., greater load capacity with lower weight (and production cost) and reduced power losses. Epicyclic geartrains are used to build the gearbox due to various advantages in relation to conventional gear systems, such as higher feasible gear ratios, higher efficiency, compactnesss, and lower weight. In this paper, several epicyclic geartrains with different structures will be analysed to reveal the influence that certain design parameters have on the size and weight of the gearbox components in the selected model and, therefore, of the gearbox itself. For this purpose, the theoretical model of the gearbox will be planned and the influence of the calculation parameters on the gearbox design will be analyzed following ISO 6336. Special emphasis is placed on the influence of the material used; the modulus and tooth width on the size and weight of the gearbox will be observed. Critical stresses are also calculated. The goal is to prepare the theoretical basis for an optimization process subject to geometric, kinematic, and dynamic constraints that will result in a gearbox as compact, energy-dense, and light as possible without compromising the service life of the components.

Suggested Citation

  • Francisco Rubio & Carlos Llopis-Albert & Ana M. Pedrosa, 2023. "Analysis of the Influence of Calculation Parameters on the Design of the Gearbox of a High-Power Wind Turbine," Mathematics, MDPI, vol. 11(19), pages 1-19, September.
    • Handle: RePEc:gam:jmathe:v:11:y:2023:i:19:p:4137-:d:1251756
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2227-7390/11/19/4137/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2227-7390/11/19/4137/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Mingming Zhao & Jinchen Ji, 2016. "Dynamic Analysis of Wind Turbine Gearbox Components," Energies, MDPI, vol. 9(2), pages 1-18, February.
    2. Adriana Florescu & Sorin Barabas & Tiberiu Dobrescu, 2019. "Research on Increasing the Performance of Wind Power Plants for Sustainable Development," Sustainability, MDPI, vol. 11(5), pages 1-19, February.
    3. Cristina Vázquez-Hernández & Javier Serrano-González & Gabriel Centeno, 2017. "A Market-Based Analysis on the Main Characteristics of Gearboxes Used in Onshore Wind Turbines," Energies, MDPI, vol. 10(11), pages 1-17, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xiaocui Chen & Qirui Wang & Yuquan Zhang & Yuan Zheng, 2024. "Dynamic Behavior of a 10 MW Floating Wind Turbine Concrete Platform under Harsh Conditions," Mathematics, MDPI, vol. 12(3), pages 1-19, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Radu Saulescu & Mircea Neagoe & Codruta Jaliu & Olimpiu Munteanu, 2021. "A Comparative Performance Analysis of Counter-Rotating Dual-Rotor Wind Turbines with Speed-Adding Increasers," Energies, MDPI, vol. 14(9), pages 1-21, May.
    2. Fan, Zhixin & Zhu, Caichao, 2019. "The optimization and the application for the wind turbine power-wind speed curve," Renewable Energy, Elsevier, vol. 140(C), pages 52-61.
    3. Chenyang Zhou & Yanxia Shen, 2022. "Suppression of Wind Generator Speed Vibration Based on the Internal Model Control with Three Degrees of Freedom," Energies, MDPI, vol. 15(19), pages 1-26, October.
    4. W. Dheelibun Remigius & Anand Natarajan, 2022. "A review of wind turbine drivetrain loads and load effects for fixed and floating wind turbines," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 11(1), January.
    5. Cristian Velandia-Cardenas & Yolanda Vidal & Francesc Pozo, 2021. "Wind Turbine Fault Detection Using Highly Imbalanced Real SCADA Data," Energies, MDPI, vol. 14(6), pages 1-26, March.
    6. Yaru Yang & Hua Li & Jin Yao & Wenxiang Gao & Haiyan Peng, 2019. "Analysis on the Force and Life of Gearbox in Double-Rotor Wind Turbine," Energies, MDPI, vol. 12(21), pages 1-19, November.
    7. Hanieh Seyedhashemi & Benoît Hingray & Christophe Lavaysse & Théo Chamarande, 2021. "The Impact of Low-Resource Periods on the Reliability of Wind Power Systems for Rural Electrification in Africa," Energies, MDPI, vol. 14(11), pages 1-18, May.
    8. Radu Saulescu & Mircea Neagoe & Codruta Jaliu, 2018. "Conceptual Synthesis of Speed Increasers for Wind Turbine Conversion Systems," Energies, MDPI, vol. 11(9), pages 1-33, August.
    9. Gorg Abdelmassih & Mohammed Al-Numay & Abdelali El Aroudi, 2021. "Map Optimization Fuzzy Logic Framework in Wind Turbine Site Selection with Application to the USA Wind Farms," Energies, MDPI, vol. 14(19), pages 1-15, September.
    10. Mircea Neagoe & Radu Saulescu & Codruta Jaliu, 2019. "Design and Simulation of a 1 DOF Planetary Speed Increaser for Counter-Rotating Wind Turbines with Counter-Rotating Electric Generators," Energies, MDPI, vol. 12(9), pages 1-19, May.
    11. Jinjing An & Guoping Chen & Zhuo Zou & Yaojie Sun & Ran Liu & Lirong Zheng, 2021. "An IoT-Based Traceability Platform for Wind Turbines," Energies, MDPI, vol. 14(9), pages 1-17, May.
    12. Zhiyu Jiang & Weifei Hu & Wenbin Dong & Zhen Gao & Zhengru Ren, 2017. "Structural Reliability Analysis of Wind Turbines: A Review," Energies, MDPI, vol. 10(12), pages 1-25, December.
    13. Tania García-Sánchez & Irene Muñoz-Benavente & Emilio Gómez-Lázaro & Ana Fernández-Guillamón, 2020. "Modelling Types 1 and 2 Wind Turbines Based on IEC 61400-27-1: Transient Response under Voltage Dips," Energies, MDPI, vol. 13(16), pages 1-19, August.
    14. Chenyang Zhou & Yanxia Shen, 2022. "A PID Control Method Based on Internal Model Control to Suppress Vibration of the Transmission Chain of Wind Power Generation System," Energies, MDPI, vol. 15(16), pages 1-18, August.
    15. Amina Bensalah & Georges Barakat & Yacine Amara, 2022. "Electrical Generators for Large Wind Turbine: Trends and Challenges," Energies, MDPI, vol. 15(18), pages 1-36, September.
    16. Shengjin Wang & Hongru Yang & Quoc Bao Pham & Dao Nguyen Khoi & Pham Thi Thao Nhi, 2020. "An Ensemble Framework to Investigate Wind Energy Sustainability Considering Climate Change Impacts," Sustainability, MDPI, vol. 12(3), pages 1-17, January.
    17. Ding, Fangfang & Tian, Zhigang & Zhao, Fuqiong & Xu, Hao, 2018. "An integrated approach for wind turbine gearbox fatigue life prediction considering instantaneously varying load conditions," Renewable Energy, Elsevier, vol. 129(PA), pages 260-270.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:11:y:2023:i:19:p:4137-:d:1251756. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.