IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i20p5047-d1496238.html
   My bibliography  Save this article

Control of Liquid Hydrocarbon Combustion Parameters in Burners with Superheated Steam Supply

Author

Listed:
  • Evgeny Kopyev

    (Kutateladze Institute of Thermophysics of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk 630090, Russia)

  • Viktor Kuznetsov

    (Kutateladze Institute of Thermophysics of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk 630090, Russia
    Department of Thermophysics, Siberian Federal University, Krasnoyarsk 660041, Russia)

  • Andrey Minakov

    (Kutateladze Institute of Thermophysics of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk 630090, Russia
    Department of Thermophysics, Siberian Federal University, Krasnoyarsk 660041, Russia)

  • Sergey Alekseenko

    (Kutateladze Institute of Thermophysics of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk 630090, Russia)

  • Oleg Sharypov

    (Kutateladze Institute of Thermophysics of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk 630090, Russia)

Abstract

A numerical simulation of reacting mixture flow in a full-scale combustion chamber of a prototype burner with a fuel-sprayed jet of superheated steam and a controlled excess air ratio was performed based on a verified model. The influence of steam jets on the combustion parameters of the created prototype device was analyzed based on the results, and a comparison with data from various atmospheric burners, including evaporative and spray types, direct-flow and vortex types, and those with natural and forced (regulated) air supply, was made. Various schemes for supplying steam to burner devices were discussed. It was shown that the relative steam consumption is a parameter for controlling the emission of toxic combustion products, such as NOx and CO, for all designs. A high burner performance is achieved when superheated steam is supplied at more than 250 °C with a relative steam flow rate of >0.6. The design features of the burner systems and operational parameters that ensure high thermal and environmental efficiency when burning various types of fuel and waste are identified.

Suggested Citation

  • Evgeny Kopyev & Viktor Kuznetsov & Andrey Minakov & Sergey Alekseenko & Oleg Sharypov, 2024. "Control of Liquid Hydrocarbon Combustion Parameters in Burners with Superheated Steam Supply," Energies, MDPI, vol. 17(20), pages 1-13, October.
    • Handle: RePEc:gam:jeners:v:17:y:2024:i:20:p:5047-:d:1496238
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/20/5047/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/17/20/5047/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Cheng, Shuo & Wang, Yuhua & Fumitake, Takahashi & Kouji, Tokimatsu & Li, Aimin & Kunio, Yoshikawa, 2017. "Effect of steam and oil sludge ash additive on the products of oil sludge pyrolysis," Applied Energy, Elsevier, vol. 185(P1), pages 146-157.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hakimian, Hanie & Pyo, Sumin & Kim, Young-Min & Jae, Jungho & Show, Pau Loke & Rhee, Gwang Hoon & Chen, Wei-Hsin & Park, Young-Kwon, 2022. "Increased aromatics production by co-feeding waste oil sludge to the catalytic pyrolysis of cellulose," Energy, Elsevier, vol. 239(PD).
    2. Chen, Xiaoling & Zhang, Yongxing & Xu, Baoshen & Li, Yifan, 2022. "A simple model for estimation of higher heating value of oily sludge," Energy, Elsevier, vol. 239(PA).
    3. Sajadi, Mahdi & Mokhtarani, Nader, 2023. "Catalytic pyrolysis of oil sludge using the nano alumina powder," Energy, Elsevier, vol. 270(C).
    4. Liu, Huidong & Xu, Guoren & Li, Guibai, 2021. "Autocatalytic sludge pyrolysis by biochar derived from pharmaceutical sludge for biogas upgrading," Energy, Elsevier, vol. 229(C).
    5. Luo, Juan & Ma, Rui & Huang, Xiaofei & Sun, Shichang & Wang, Hao, 2020. "Bio-fuels generation and the heat conversion mechanisms in different microwave pyrolysis modes of sludge," Applied Energy, Elsevier, vol. 266(C).
    6. Zhang, Xu & Guo, Wei & Pan, Junfan & Zhu, Chaofan & Deng, Sunhua, 2024. "In-situ pyrolysis of oil shale in pressured semi-closed system: Insights into products characteristics and pyrolysis mechanism," Energy, Elsevier, vol. 286(C).
    7. Sun, Yongqi & Chen, Jingjing & Zhang, Zuotai, 2019. "General roles of sludge ash, CaO and Al2O3 on the sludge pyrolysis toward clean utilizations," Applied Energy, Elsevier, vol. 233, pages 412-423.
    8. Xu, Hao & Hungwe, Douglas & Yang, Pu & Yu, Mengzhu & Cheng, Shuo & Yoshikawa, Kunio & Takahashi, Fumitake, 2024. "Oil sludge addition enables prediction of biomass pyrolysis product profiles by synergistic behaviors between biomass components and oil sludge," Applied Energy, Elsevier, vol. 362(C).
    9. Quan, Hongping & Li, Pengfei & Duan, Wenmeng & Chen, Liao & Xing, Langman, 2019. "A series of methods for investigating the effect of a flow improver on the asphaltene and resin of crude oil," Energy, Elsevier, vol. 187(C).
    10. Liu, Zhongzhe & Hughes, Matthew & Tong, Yiran & Zhou, Jizhi & Kreutter, William & Valtierra, Danny & Singer, Simcha & Zitomer, Daniel & McNamara, Patrick, 2021. "Enhanced energy and resource recovery via synergistic catalytic pyrolysis of byproducts from thermal processing of wastewater solids," Renewable Energy, Elsevier, vol. 177(C), pages 475-481.
    11. Uyar, Mahmut & Aydın, Hüseyin, 2022. "Production of low sulfur diesel-like fuel from crude oil wastes by pyrolytic distillation and its usage in a diesel engine," Energy, Elsevier, vol. 244(PA).
    12. Cheng, Shuo & Zhang, Hongtao & Chang, Fengmin & Zhang, Feng & Wang, Kaijun & Qin, Ya & Huang, Tixiao, 2019. "Combustion behavior and thermochemical treatment scheme analysis of oil sludges and oil sludge semicokes," Energy, Elsevier, vol. 167(C), pages 575-587.
    13. Hongyuan Qi & Huayi Jiang & Yanzhen You & Juan Hu & Yulong Wang & Zhe Wu & Hongxin Qi, 2022. "Mechanism of Magnetic Nanoparticle Enhanced Microwave Pyrolysis for Oily Sludge," Energies, MDPI, vol. 15(4), pages 1-22, February.
    14. Zhang, Xitong & Xu, Jiayu & Ran, Shuai & Gao, Ying & Lyu, Yinong & Pan, Yueshen & Cao, Fei & Lin, Yunhao & Yang, Zixu & Wang, Zhongxian & Guo, Dandan & Wang, Qi & Zhu, Lin & Zhu, Yuezhao, 2022. "Experimental study on catalytic pyrolysis of oily sludge for H2 production under new nickel-ore-based catalysts," Energy, Elsevier, vol. 249(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:20:p:5047-:d:1496238. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.