IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i16p3905-d1451897.html
   My bibliography  Save this article

New External Design Temperatures and Geospatial Models for Poland and Central Europe for Building Heat Load Calculations

Author

Listed:
  • Piotr Narowski

    (Faculty of Building Services, Hydro and Environmental Engineering, Warsaw University of Technology, 00-653 Warsaw, Poland)

  • Dariusz Heim

    (Faculty of Process and Environmental Engineering, Lodz University of Technology, 93-005 Lodz, Poland)

  • Maciej Mijakowski

    (Faculty of Building Services, Hydro and Environmental Engineering, Warsaw University of Technology, 00-653 Warsaw, Poland)

Abstract

This article proposes new values and geospatial models of winter and summer external design temperatures for designing buildings’ heating, ventilation, and air-conditioning (HVAC) systems. The climatic design parameters applicable in Poland for the sizing of these installations are approximately 50 years old and do not correspond to Poland’s current climate. New values of climatic design parameters were determined following the methods described in European standards and the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Handbook of Fundamentals. The determined climatic design parameters, particularly the winter and summer external design temperatures, were compared with those currently in force by law in Poland. The external air design dry-bulb temperatures presented in the article were developed based on meteorological and climatic data from the years 1991–2020 from two data sources: synoptic data from the Institute of Meteorology and Water Management (IMWM) in Poland and reanalysis models of the ERA5 database of the European Centre for Medium-Range Weather Forecasts (ECMWF). According to ASHRAE, with 99.6% and 0.4% frequency of occurrence, external air design dry-bulb temperatures for winter and summer were used to develop mathematical geospatial models of external design temperatures for the Central Europe area with Poland’s territory in the centre part. Scattered data from 667 meteorological stations were interpolated to 40,000 uniform mesh points using a biharmonic spline interpolation method to develop these models. Linear regression and ANOVA analysis for the ERA5-generated data from 900 checkpoint data items were used to estimate the correctness of these models. Verified models were used to calculate winter and summer external design temperature isolines presented together with colour space representation on Mercator projected maps of Central Europe.

Suggested Citation

  • Piotr Narowski & Dariusz Heim & Maciej Mijakowski, 2024. "New External Design Temperatures and Geospatial Models for Poland and Central Europe for Building Heat Load Calculations," Energies, MDPI, vol. 17(16), pages 1-21, August.
    • Handle: RePEc:gam:jeners:v:17:y:2024:i:16:p:3905-:d:1451897
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/16/3905/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/17/16/3905/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Spandagos, Constantinos & Ng, Tze Ling, 2017. "Equivalent full-load hours for assessing climate change impact on building cooling and heating energy consumption in large Asian cities," Applied Energy, Elsevier, vol. 189(C), pages 352-368.
    2. De Rosa, Mattia & Bianco, Vincenzo & Scarpa, Federico & Tagliafico, Luca A., 2014. "Heating and cooling building energy demand evaluation; a simplified model and a modified degree days approach," Applied Energy, Elsevier, vol. 128(C), pages 217-229.
    3. Park, Haryn & Kim, Jin-Kuk & Yi, Sung Chul, 2023. "Optimization of site utility systems for renewable energy integration," Energy, Elsevier, vol. 269(C).
    4. Li, Honglian & Zhang, Tiantian & Wang, An & Wang, Mengli & Huang, Jin & Hu, Yao, 2023. "A new method of generating extreme building energy year and its application," Energy, Elsevier, vol. 278(PB).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jiang, Dachuan & Xiao, Weihua & Wang, Jianhua & Wang, Hao & Zhao, Yong & Li, Baoqi & Zhou, Pu, 2018. "Evaluation of the effects of one cold wave on heating energy consumption in different regions of northern China," Energy, Elsevier, vol. 142(C), pages 331-338.
    2. Agnieszka Malec & Tomasz Cholewa & Alicja Siuta-Olcha, 2021. "Influence of Cold Water Inlets and Obstacles on the Energy Efficiency of the Hot Water Production Process in a Hot Water Storage Tank," Energies, MDPI, vol. 14(20), pages 1-26, October.
    3. Omar, M.N. & Samak, A.A. & Keshek, M.H. & Elsisi, S.F., 2020. "Simulation and validation model for using the energy produced from broiler litter waste in their house and its requirement of energy," Renewable Energy, Elsevier, vol. 159(C), pages 920-928.
    4. Liang Chen & Yuanfan Zheng & Jia Yu & Yuanhang Peng & Ruipeng Li & Shilingyun Han, 2024. "A GIS-Based Approach for Urban Building Energy Modeling under Climate Change with High Spatial and Temporal Resolution," Energies, MDPI, vol. 17(17), pages 1-24, August.
    5. Papada, Lefkothea & Kaliampakos, Dimitris, 2016. "Developing the energy profile of mountainous areas," Energy, Elsevier, vol. 107(C), pages 205-214.
    6. D'Amico, A. & Ciulla, G. & Panno, D. & Ferrari, S., 2019. "Building energy demand assessment through heating degree days: The importance of a climatic dataset," Applied Energy, Elsevier, vol. 242(C), pages 1285-1306.
    7. Yazdanie, M. & Orehounig, K., 2021. "Advancing urban energy system planning and modeling approaches: Gaps and solutions in perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    8. Prades-Gil, C. & Viana-Fons, J.D. & Masip, X. & Cazorla-Marín, A. & Gómez-Navarro, T., 2023. "An agile heating and cooling energy demand model for residential buildings. Case study in a mediterranean city residential sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 175(C).
    9. Seyed Amin Tabatabaei & Wim Van der Ham & Michel C. A. Klein & Jan Treur, 2017. "A Data Analysis Technique to Estimate the Thermal Characteristics of a House," Energies, MDPI, vol. 10(9), pages 1-19, September.
    10. Tarroja, Brian & Chiang, Felicia & AghaKouchak, Amir & Samuelsen, Scott & Raghavan, Shuba V. & Wei, Max & Sun, Kaiyu & Hong, Tianzhen, 2018. "Translating climate change and heating system electrification impacts on building energy use to future greenhouse gas emissions and electric grid capacity requirements in California," Applied Energy, Elsevier, vol. 225(C), pages 522-534.
    11. Mendes, Vítor Freitas & Cruz, Alexandre Santana & Gomes, Adriano Pinto & Mendes, Júlia Castro, 2024. "A systematic review of methods for evaluating the thermal performance of buildings through energy simulations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PA).
    12. Küçüktopcu, Erdem & Cemek, Bilal, 2018. "A study on environmental impact of insulation thickness of poultry building walls," Energy, Elsevier, vol. 150(C), pages 583-590.
    13. Nnaemeka Vincent Emodi & Taha Chaiechi & ABM Rabiul Alam Beg, 2018. "The impact of climate change on electricity demand in Australia," Energy & Environment, , vol. 29(7), pages 1263-1297, November.
    14. Perera, D.W.U. & Winkler, D. & Skeie, N.-O., 2016. "Multi-floor building heating models in MATLAB and Modelica environments," Applied Energy, Elsevier, vol. 171(C), pages 46-57.
    15. Gao, Yuan & Hu, Zehuan & Chen, Wei-An & Liu, Mingzhe, 2024. "Solutions to the insufficiency of label data in renewable energy forecasting: A comparative and integrative analysis of domain adaptation and fine-tuning," Energy, Elsevier, vol. 302(C).
    16. Burleyson, Casey D. & Voisin, Nathalie & Taylor, Z. Todd & Xie, Yulong & Kraucunas, Ian, 2018. "Simulated building energy demand biases resulting from the use of representative weather stations," Applied Energy, Elsevier, vol. 209(C), pages 516-528.
    17. Felipe Rosas-Díaz & David Gilberto García-Hernández & Cesar A. Juárez-Alvarado, 2024. "Development of Lignocellulosic-Based Insulation Materials from Agave fourcroydes and Washingtonia filifera for Use in Sustainable Buildings," Sustainability, MDPI, vol. 16(13), pages 1-17, June.
    18. Kheiri, Farshad & Haberl, Jeff S. & Baltazar, Juan-Carlos, 2023. "Impact of outdoor humidity conditions on building energy performance and environmental footprint in the degree days-based climate classification," Energy, Elsevier, vol. 283(C).
    19. Pilechiha, Peiman & Mahdavinejad, Mohammadjavad & Pour Rahimian, Farzad & Carnemolla, Phillippa & Seyedzadeh, Saleh, 2020. "Multi-objective optimisation framework for designing office windows: quality of view, daylight and energy efficiency," Applied Energy, Elsevier, vol. 261(C).
    20. Ciulla, Giuseppina & Lo Brano, Valerio & D’Amico, Antonino, 2016. "Modelling relationship among energy demand, climate and office building features: A cluster analysis at European level," Applied Energy, Elsevier, vol. 183(C), pages 1021-1034.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:16:p:3905-:d:1451897. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.