IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i6p2832-d1100984.html
   My bibliography  Save this article

Research on the Ignition Process and Flame Stabilization of a Combination of Step and Strut: Experimental and Numerical Study

Author

Listed:
  • Shilong Zhao

    (School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China)

  • Hui Xiao

    (School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China)

  • Yafan Li

    (School of Aeronautics and Astronautics, Sun Yat-sen University, Shenzhen 518107, China)

Abstract

A combined application of step and strut was put forward to achieve reliable ignition and flame stabilization. In this work, the ignition process and temperature distribution have been tested, and a new reduction approach applied to jet fuel oxidation mechanism was developed to present a flow map via tracking C and H reaction paths, then the minor and major reactions were verified according to relative occurrence probabilities. With the half decrease of mechanism size, bias occurred and was controlled within 1.8%. This reduction method had such characteristics as universality, intuition, and quantification, due to its inherent simplification theory. This simulation of ignition process was always consistent with experimental results, which depicted kernel generation, flamelet breakup and flame propagation. Also, the influence of inlet temperature on outlet temperature and component distribution was performed, the biases of experimental and numerical results were within 5%. Chemical characteristics of Kerosene/air premixed combustible had changed and side reactions occurred to jet fuel above 900 K, which led to a converse effect on flame spreading. The side reactions aggravated the increasing coproducts of CO and CH4, which caused the decrease of volumetric heat production.

Suggested Citation

  • Shilong Zhao & Hui Xiao & Yafan Li, 2023. "Research on the Ignition Process and Flame Stabilization of a Combination of Step and Strut: Experimental and Numerical Study," Energies, MDPI, vol. 16(6), pages 1-16, March.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2832-:d:1100984
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/6/2832/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/6/2832/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Shu, Jun & Fu, Jianqin & Liu, Jingping & Ma, Yinjie & Wang, Shuqian & Deng, Banglin & Zeng, Dongjian, 2019. "Effects of injector spray angle on combustion and emissions characteristics of a natural gas (NG)-diesel dual fuel engine based on CFD coupled with reduced chemical kinetic model," Applied Energy, Elsevier, vol. 233, pages 182-195.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Van Chien Pham & Jae-Hyuk Choi & Beom-Seok Rho & Jun-Soo Kim & Kyunam Park & Sang-Kyun Park & Van Vang Le & Won-Ju Lee, 2021. "A Numerical Study on the Combustion Process and Emission Characteristics of a Natural Gas-Diesel Dual-Fuel Marine Engine at Full Load," Energies, MDPI, vol. 14(5), pages 1-28, March.
    2. Krishnamoorthi, M. & Sreedhara, S. & Prakash Duvvuri, Pavan, 2020. "Experimental, numerical and exergy analyses of a dual fuel combustion engine fuelled with syngas and biodiesel/diesel blends," Applied Energy, Elsevier, vol. 263(C).
    3. Yang, Kailin & Wang, Zhongshu & Zhang, Kechao & Wang, Dan & Xie, Fangxi & Xu, Yun & Yang, Kaiqiang, 2023. "Impact of natural gas injection timing on the combustion and emissions performance of a dual-direct-injection diesel/natural gas engine," Energy, Elsevier, vol. 270(C).
    4. Motlagh, Tara Yazdani & Azadani, Leila N. & Yazdani, Kaveh, 2020. "Multi-objective optimization of diesel injection parameters in a natural gas/diesel reactivity controlled compression ignition engine," Applied Energy, Elsevier, vol. 279(C).
    5. Pei, Zhongwen & Liu, Kaimin & Luo, Wusheng & Yang, Jing & Li, Yangtao, 2023. "Experimental study on the effect of aftertreatment system on the energy flow pattern and emission reduction of a natural gas engine under world harmonized transient cycle," Energy, Elsevier, vol. 263(PB).
    6. Fu, Jianqin & Deng, Banglin & Liu, Xiaoqiang & Shu, Jun & Xu, Ying & Liu, Jingping, 2020. "The experimental study on transient emissions and engine behaviors of a sporting motorcycle under World Motorcycle Test Cycle," Energy, Elsevier, vol. 211(C).
    7. Qinglin Zhang & Zhaoping Xu & Shuangshuang Liu & Liang Liu, 2020. "Effects of Injector Spray Angle on Performance of an Opposed-Piston Free-Piston Engine," Energies, MDPI, vol. 13(14), pages 1-17, July.
    8. Zandie, Mohammad & Ng, Hoon Kiat & Gan, Suyin & Muhamad Said, Mohd Farid & Cheng, Xinwei, 2022. "A comprehensive CFD study of the spray combustion, soot formation and emissions of ternary mixtures of diesel, biodiesel and gasoline under compression ignition engine-relevant conditions," Energy, Elsevier, vol. 260(C).
    9. Zhou, Haiqin & Li, Xiangrong & Chen, Yanlin & Kang, Yuning & Liu, Dong & Liu, Fushui, 2020. "The effect of spray angle on the combustion and emission performance of a separated swirl combustion system in a diesel engine," Energy, Elsevier, vol. 190(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2832-:d:1100984. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.