IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i24p8030-d1298812.html
   My bibliography  Save this article

Model-Based Calibration and Control of Tailpipe Nitrogen Oxide Emissions in a Light-Duty Diesel Engine and Its Assessment through Model-In-The-Loop

Author

Listed:
  • Stefano d’Ambrosio

    (Energy Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy)

  • Cosimo Di Dio

    (Energy Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy)

  • Roberto Finesso

    (Energy Department, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino, Italy)

Abstract

The present paper investigates two different strategies for model-based calibration and control of tailpipe nitrogen oxide emissions in a light-duty 3.0 L diesel engine equipped with an aftertreatment system (ATS). The latter includes a diesel oxidation catalyst (DOC), a diesel particulate filter (DPF), and an underfloor selective catalytic reduction (SCR) device, in which the injection of diesel exhaust fluid (DEF), marketed as ‘AdBlue’, is also taken into account. The engine was modeled in the GT-SUITE environment, and a previously developed model-based combustion controller was integrated in the model, which is capable of adjusting the start of injection of the main pulse and the total injected fuel mass, in order to achieve desired targets of engine-out nitrogen oxide emissions (NOx) and brake mean effective pressure (BMEP). First, a model-based calibration strategy consisting of the minimization of an objective function that takes into account fuel consumption and AdBlue injection was developed and assessed by exploring different weight factors. Then, a direct model-based controller of tailpipe nitrogen oxide emissions was designed, which exploits the real-time value of the SCR efficiency to define engine-out NOx emission targets for the combustion controller. Both strategies exploit the model-based combustion controller and were tested through a Model-in-the-Loop (MiL) under steady-state and transient conditions. The advantages in terms of tailpipe NOx emissions, fuel consumption, and AdBlue injection were finally discussed.

Suggested Citation

  • Stefano d’Ambrosio & Cosimo Di Dio & Roberto Finesso, 2023. "Model-Based Calibration and Control of Tailpipe Nitrogen Oxide Emissions in a Light-Duty Diesel Engine and Its Assessment through Model-In-The-Loop," Energies, MDPI, vol. 16(24), pages 1-29, December.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:24:p:8030-:d:1298812
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/24/8030/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/24/8030/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Asprion, Jonas & Chinellato, Oscar & Guzzella, Lino, 2013. "A fast and accurate physics-based model for the NOx emissions of Diesel engines," Applied Energy, Elsevier, vol. 103(C), pages 221-233.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rafael R. Maes & Geert Potters & Erik Fransen & Rowan Van Schaeren & Silvia Lenaerts, 2022. "Influence of Adding Low Concentration of Oxygenates in Mineral Diesel Oil and Biodiesel on the Concentration of NO, NO 2 and Particulate Matter in the Exhaust Gas of a One-Cylinder Diesel Generator," IJERPH, MDPI, vol. 19(13), pages 1-18, June.
    2. Seungha Lee & Youngbok Lee & Gyujin Kim & Kyoungdoug Min, 2017. "Development of a Real-Time Virtual Nitric Oxide Sensor for Light-Duty Diesel Engines," Energies, MDPI, vol. 10(3), pages 1-21, March.
    3. Tauzia, Xavier & Maiboom, Alain & Karaky, Hassan, 2017. "Semi-physical models to assess the influence of CI engine calibration parameters on NOx and soot emissions," Applied Energy, Elsevier, vol. 208(C), pages 1505-1518.
    4. Bo Liu & Fuwu Yan & Jie Hu & Richard Fiifi Turkson & Feng Lin, 2016. "Modeling and Multi-Objective Optimization of NO x Conversion Efficiency and NH 3 Slip for a Diesel Engine," Sustainability, MDPI, vol. 8(5), pages 1-13, May.
    5. Rahmani, R. & Rahnejat, H. & Fitzsimons, B. & Dowson, D., 2017. "The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction," Applied Energy, Elsevier, vol. 191(C), pages 568-581.
    6. Roberto Finesso & Gilles Hardy & Alessandro Mancarella & Omar Marello & Antonio Mittica & Ezio Spessa, 2019. "Real-Time Simulation of Torque and Nitrogen Oxide Emissions in an 11.0 L Heavy-Duty Diesel Engine for Model-Based Combustion Control," Energies, MDPI, vol. 12(3), pages 1-32, January.
    7. Roberto Finesso & Gilles Hardy & Claudio Maino & Omar Marello & Ezio Spessa, 2017. "A New Control-Oriented Semi-Empirical Approach to Predict Engine-Out NOx Emissions in a Euro VI 3.0 L Diesel Engine," Energies, MDPI, vol. 10(12), pages 1-26, November.
    8. d’Ambrosio, Stefano & Finesso, Roberto & Fu, Lezhong & Mittica, Antonio & Spessa, Ezio, 2014. "A control-oriented real-time semi-empirical model for the prediction of NOx emissions in diesel engines," Applied Energy, Elsevier, vol. 130(C), pages 265-279.
    9. Molina, S. & Guardiola, C. & Martín, J. & García-Sarmiento, D., 2014. "Development of a control-oriented model to optimise fuel consumption and NOX emissions in a DI Diesel engine," Applied Energy, Elsevier, vol. 119(C), pages 405-416.
    10. Liu, Yintong & Li, Liguang & Ye, Junyu & Wu, Zhijun & Deng, Jun, 2015. "Numerical simulation study on correlation between ion current signal and NOX emissions in controlled auto-ignition engine," Applied Energy, Elsevier, vol. 156(C), pages 776-782.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:24:p:8030-:d:1298812. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.