IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i9p3157-d802537.html
   My bibliography  Save this article

Studying the Bond Performance of Full-Grouting Rock Bolts Based on the Variable Controlling Method

Author

Listed:
  • Jianhang Chen

    (State Key Laboratory of Coal Resources in Western China, Xi’an University of Science and Technology, Xi’an 710054, China
    Shaanxi Key Laboratory of Geotechnical and Underground Space Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
    School of Energy and Mining Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China)

  • Ziwei Ding

    (State Key Laboratory of Coal Resources in Western China, Xi’an University of Science and Technology, Xi’an 710054, China)

  • Saisai Wu

    (Shaanxi Key Laboratory of Geotechnical and Underground Space Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China)

  • Junwen Zhang

    (School of Energy and Mining Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China)

Abstract

This paper studied the bond performance of full-grouting rock bolts with a theoretical analysis. The variable controlling method was used to study the effect of parameters on the load-carrying force of bars. The results showed that when the bar diameter grew from 15 mm to 25 mm, the maximum force of the bars rose from 194 kN to 349 kN, growing by 80%. As for the stiffness, it grew by 108%. Moreover, when the elastic modulus grew from 50 GPa to 200 GPa, the maximum force rose from 229 kN to 269 kN, only growing by 17%. As for the stiffness, it grew by 100%. When the grouting length increased from 2 m to 3 m, the maximum force rose from 269 kN to 364 kN, growing by 35%. However, the grouting length had almost no effect on the stiffness. Lastly, for the bond slip when the bond strength was reached, when it grew from 1 mm to 3 mm, the maximum force dropped from 281 kN to 258 kN, dropping by 8%. As for the stiffness, it dropped by 44%. This paper is conducive to enriching the base of knowledge.

Suggested Citation

  • Jianhang Chen & Ziwei Ding & Saisai Wu & Junwen Zhang, 2022. "Studying the Bond Performance of Full-Grouting Rock Bolts Based on the Variable Controlling Method," Energies, MDPI, vol. 15(9), pages 1-15, April.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:9:p:3157-:d:802537
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/9/3157/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/9/3157/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Krzysztof Skrzypkowski & Waldemar Korzeniowski & Krzysztof Zagórski & Anna Zagórska, 2019. "Flexibility and Load-Bearing Capacity of Roof Bolting as Functions of Mounting Depth and Hole Diameter," Energies, MDPI, vol. 12(19), pages 1-23, September.
    2. Zizheng Zhang & Xianyang Yu & Hai Wu & Min Deng, 2019. "Stability Control for Gob-Side Entry Retaining with Supercritical Retained Entry Width in Thick Coal Seam Longwall Mining," Energies, MDPI, vol. 12(7), pages 1-16, April.
    3. Yajun Wang & Yubing Gao & Eryu Wang & Manchao He & Jun Yang, 2018. "Roof Deformation Characteristics and Preventive Techniques Using a Novel Non-Pillar Mining Method of Gob-Side Entry Retaining by Roof Cutting," Energies, MDPI, vol. 11(3), pages 1-17, March.
    4. Krzysztof Skrzypkowski, 2021. "An Experimental Investigation into the Stress-Strain Characteristic under Static and Quasi-Static Loading for Partially Embedded Rock Bolts," Energies, MDPI, vol. 14(5), pages 1-17, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yulong Chen & Junwen Zhang & Jianhang Chen & Xuejie Deng, 2022. "Special Issue: Rock Burst Disasters in Coal Mines," Energies, MDPI, vol. 15(13), pages 1-6, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Erhu Bai & Wenbing Guo & Dongsheng Zhang & Yi Tan & Mingjie Guo & Gaobo Zhao, 2019. "Using the Magnetotelluric Method for Detecting Aquifer Failure Characteristics under High-Intensity Mining of Thick Coal Seams," Energies, MDPI, vol. 12(22), pages 1-14, November.
    2. Krzysztof Lalik & Ireneusz Dominik & Paweł Gut & Krzysztof Skrzypkowski & Waldemar Korzeniowski & Krzysztof Zagórski, 2021. "Non-Destructive Acoustical Rock Bolt Testing System with Intelligent Filtering in Salt Mine ‘Wieliczka’," Energies, MDPI, vol. 14(17), pages 1-16, September.
    3. Wenlong Shen & Meng Wang & Zhengzheng Cao & Faqiang Su & Hua Nan & Xuelong Li, 2019. "Mining-Induced Failure Criteria of Interactional Hard Roof Structures: A Case Study," Energies, MDPI, vol. 12(15), pages 1-17, August.
    4. Xiaoyu Liu & Manchao He & Jiong Wang & Zimin Ma, 2021. "Research on Non-Pillar Coal Mining for Thick and Hard Conglomerate Roof," Energies, MDPI, vol. 14(2), pages 1-14, January.
    5. Shengrong Xie & Yiyi Wu & Fangfang Guo & Hang Zou & Dongdong Chen & Xiao Zhang & Xiang Ma & Ruipeng Liu & Chaowen Wu, 2022. "Application of Pre-Splitting and Roof-Cutting Control Technology in Coal Mining: A Review of Technology," Energies, MDPI, vol. 15(17), pages 1-20, September.
    6. Zhenqian Ma & Dongyue Zhang & Yunqin Cao & Wei Yang & Biao Xu, 2022. "Study of Key Technology of Gob-Side Entry Retention in a High Gas Outburst Coal Seam in the Karst Mountain Area," Energies, MDPI, vol. 15(11), pages 1-21, June.
    7. Lifeng Li & Gan Li & Weili Gong & Jiong Wang & Huilin Deng, 2019. "Energy Evolution Pattern and Roof Control Strategy in Non-Pillar Mining Method of Goaf-Side Entry Retaining by Roof Cutting—A Case Study," Sustainability, MDPI, vol. 11(24), pages 1-18, December.
    8. Zimin Ma & Jiong Wang & Manchao He & Yubing Gao & Jinzhu Hu & Qiong Wang, 2018. "Key Technologies and Application Test of an Innovative Noncoal Pillar Mining Approach: A Case Study," Energies, MDPI, vol. 11(10), pages 1-22, October.
    9. Housheng Jia & Kun Pan & Shaowei Liu & Bo Peng & Kai Fan, 2019. "Evaluation of the Mechanical Instability of Mining Roadway Overburden: Research and Applications," Energies, MDPI, vol. 12(22), pages 1-19, November.
    10. Zhibiao Guo & Haohao Wang & Zimin Ma & Pengfei Wang & Xiaohui Kuai & Xianzhe Zhang, 2021. "Research on the Transmission of Stresses by Roof Cutting near Gob Rocks," Energies, MDPI, vol. 14(5), pages 1-24, February.
    11. Krzysztof Skrzypkowski & Waldemar Korzeniowski & Krzysztof Zagórski & Anna Zagórska, 2020. "Adjustment of the Yielding System of Mechanical Rock Bolts for Room and Pillar Mining Method in Stratified Rock Mass," Energies, MDPI, vol. 13(8), pages 1-23, April.
    12. Krzysztof Skrzypkowski, 2020. "Decreasing Mining Losses for the Room and Pillar Method by Replacing the Inter-Room Pillars by the Construction of Wooden Cribs Filled with Waste Rocks," Energies, MDPI, vol. 13(14), pages 1-20, July.
    13. Qizhi Chen & Baoping Zou & Zhigang Tao & Manchao He & Bo Hu, 2023. "Construction and Application of an Intelligent Roof Stability Evaluation System for the Roof-Cutting Non-Pillar Mining Method," Sustainability, MDPI, vol. 15(3), pages 1-17, February.
    14. Krzysztof Skrzypkowski, 2019. "The Influence of Room and Pillar Method Geometry on the Deposit Utilization Rate and Rock Bolt Load," Energies, MDPI, vol. 12(24), pages 1-15, December.
    15. Peng Kong & Lishuai Jiang & Jinquan Jiang & Yongning Wu & Lianjun Chen & Jianguo Ning, 2019. "Numerical Analysis of Roadway Rock-Burst Hazard under Superposed Dynamic and Static Loads," Energies, MDPI, vol. 12(19), pages 1-19, September.
    16. Houqiang Yang & Changliang Han & Nong Zhang & Yuantian Sun & Dongjiang Pan & Changlun Sun, 2020. "Long High-Performance Sustainable Bolt Technology for the Deep Coal Roadway Roof: A Case Study," Sustainability, MDPI, vol. 12(4), pages 1-14, February.
    17. Xiaowei Guo & Xigui Zheng & Peng Li & Rui Lian & Cancan Liu & Niaz Muhammad Shahani & Cong Wang & Boyang Li & Wenjie Xu & Guowei Lai, 2021. "Full-Stress Anchoring Technology and Application of Bolts in the Coal Roadway," Energies, MDPI, vol. 14(22), pages 1-24, November.
    18. Jinzhu Hu & Manchao He & Jiong Wang & Zimin Ma & Yajun Wang & Xingyu Zhang, 2019. "Key Parameters of Roof Cutting of Gob-Side Entry Retaining in a Deep Inclined Thick Coal Seam with Hard Roof," Energies, MDPI, vol. 12(5), pages 1-19, March.
    19. Krzysztof Skrzypkowski & Waldemar Korzeniowski & Krzysztof Zagórski & Anna Zagórska, 2020. "Modified Rock Bolt Support for Mining Method with Controlled Roof Bending," Energies, MDPI, vol. 13(8), pages 1-20, April.
    20. Jun Yang & Hongyu Wang & Yajun Wang & Binhui Liu & Shilin Hou & Yu Cheng, 2019. "Stability Analysis of the Entry in a New Mining Approach Influenced by Roof Fracture Position," Sustainability, MDPI, vol. 11(22), pages 1-16, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:9:p:3157-:d:802537. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.