IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i9p3061-d799530.html
   My bibliography  Save this article

The Impact of Thermal Inertia on the Indoor Thermal Environment of Light Steel Framing Constructions

Author

Listed:
  • Eduardo Roque

    (RISCO—Risks and Sustainability in Construction, Department of Civil Engineering, University of Aveiro, 3810-193 Aveiro, Portugal)

  • Romeu Vicente

    (RISCO—Risks and Sustainability in Construction, Department of Civil Engineering, University of Aveiro, 3810-193 Aveiro, Portugal)

  • Ricardo M. S. F. Almeida

    (Department of Civil Engineering, Polytechnic Institute of Viseu, School of Technology and Management, Campus Politécnico de Repeses, 3504-510 Viseu, Portugal
    CONSTRUCT-LFC, Faculty of Engineering (FEUP), University of Porto, Rua Dr. Roberto Frias s/n, 4200-465 Porto, Portugal)

  • Victor M. Ferreira

    (RISCO—Risks and Sustainability in Construction, Department of Civil Engineering, University of Aveiro, 3810-193 Aveiro, Portugal)

Abstract

Typically, reinforced concrete and brick masonry construction is the most common construction system of the majority of the southern European residential building stock. However, the lightweight steel framing (LSF) construction system has been progressively assuming a relevant position in the residential sector. Since LSF is not the traditional construction system, the indoor thermal environment of these buildings has not been widely studied and discussed considering the southern European climate context. The low thermal inertia of this construction system is commonly pointed to as a possible weakness in warmer climates. The present work aims to address this research gap by evaluating and comparing the LSF and masonry construction systems in terms of the indoor thermal environment focusing on the level of thermal inertia. The considered methodology lies in a long-term experimental campaign based on the construction and monitoring of two identical experimental test cells, differing only in the construction system. The test cells are in the central region of Portugal. The monitoring period elapsed over an entire year. Dynamic simulations are also carried out with a model experimentally validated to consider a wider range of climatic conditions. It is shown that internally insulating the ground floor has an impact on the indoor thermal environment of the LSF test cell by accentuating the indoor air temperature fluctuations and magnitude of the extreme peak values. However, the results also reveal that the faster and closer response to the outdoor conditions may be beneficial for LSF buildings during the heating season.

Suggested Citation

  • Eduardo Roque & Romeu Vicente & Ricardo M. S. F. Almeida & Victor M. Ferreira, 2022. "The Impact of Thermal Inertia on the Indoor Thermal Environment of Light Steel Framing Constructions," Energies, MDPI, vol. 15(9), pages 1-17, April.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:9:p:3061-:d:799530
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/9/3061/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/9/3061/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Stazi, Francesca & Tomassoni, Elisa & Bonfigli, Cecilia & Di Perna, Costanzo, 2014. "Energy, comfort and environmental assessment of different building envelope techniques in a Mediterranean climate with a hot dry summer," Applied Energy, Elsevier, vol. 134(C), pages 176-196.
    2. Ormandy, David & Ezratty, Véronique, 2012. "Health and thermal comfort: From WHO guidance to housing strategies," Energy Policy, Elsevier, vol. 49(C), pages 116-121.
    3. Grzegorz Nawalany & Paweł Sokołowski, 2019. "Building–Soil Thermal Interaction: A Case Study," Energies, MDPI, vol. 12(15), pages 1-12, July.
    4. Paweł Sokołowski & Grzegorz Nawalany, 2020. "Analysis of Energy Exchange with the Ground in a Two-Chamber Vegetable Cold Store, Assuming Different Lengths of Technological Break, with the Use of a Numerical Calculation Method—A Case Study," Energies, MDPI, vol. 13(18), pages 1-15, September.
    5. Eduardo Roque & Romeu Vicente & Ricardo M. S. F. Almeida, 2021. "Indoor Thermal Environment Challenges of Light Steel Framing in the Southern European Context," Energies, MDPI, vol. 14(21), pages 1-23, October.
    6. Verbeke, Stijn & Audenaert, Amaryllis, 2018. "Thermal inertia in buildings: A review of impacts across climate and building use," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2300-2318.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Zhikai & Zhang, Huang & Wang, Yaran & Fan, Xianwang & You, Shijun & Li, Ang, 2023. "Data-driven predictive model for feedback control of supply temperature in buildings with radiator heating system," Energy, Elsevier, vol. 280(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Eduardo Roque & Romeu Vicente & Ricardo M. S. F. Almeida, 2021. "Indoor Thermal Environment Challenges of Light Steel Framing in the Southern European Context," Energies, MDPI, vol. 14(21), pages 1-23, October.
    2. Paweł Sokołowski & Grzegorz Nawalany & Małgorzata Michalik, 2022. "Analysis of the Impact of Flooring Material and Construction Solutions on Heat Exchange with the Ground in a Historic Wooden Building," Energies, MDPI, vol. 15(16), pages 1-17, August.
    3. Paweł Sokołowski & Grzegorz Nawalany & Tomasz Jakubowski & Ernest Popardowski & Vasyl Lopushniak & Atilgan Atilgan, 2022. "Numerical Analysis of Thermal Impact between the Cooling Facility and the Ground," Energies, MDPI, vol. 15(24), pages 1-16, December.
    4. Grzegorz Nawalany & Paweł Sokołowski, 2021. "Numerical Analysis of the Effect of Ground Dampness on Heat Transfer between Greenhouse and Ground," Sustainability, MDPI, vol. 13(6), pages 1-10, March.
    5. Avendaño-Vera, Constanza & Martinez-Soto, Aner & Marincioni, Valentina, 2020. "Determination of optimal thermal inertia of building materials for housing in different Chilean climate zones," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    6. Gupta, V. & Deb, C., 2023. "Envelope design for low-energy buildings in the tropics: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 186(C).
    7. Guo, Yurun & Wang, Shugang & Wang, Jihong & Zhang, Tengfei & Ma, Zhenjun & Jiang, Shuang, 2024. "Key district heating technologies for building energy flexibility: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PB).
    8. Daniela D’Alessandro & Andrea Rebecchi & Letizia Appolloni & Andrea Brambilla & Silvio Brusaferro & Maddalena Buffoli & Maurizio Carta & Alessandra Casuccio & Liliana Coppola & Maria Vittoria Corazza , 2023. "Re-Thinking the Environment, Cities, and Living Spaces for Public Health Purposes, According with the COVID-19 Lesson: The LVII Erice Charter," Land, MDPI, vol. 12(10), pages 1-17, September.
    9. Burlinson, Andrew & Giulietti, Monica & Law, Cherry & Liu, Hui-Hsuan, 2021. "Fuel poverty and financial distress," Energy Economics, Elsevier, vol. 102(C).
    10. Grzegorz Nawalany & Paweł Sokołowski, 2020. "Improved Energy Management in an Intermittently Heated Building Using a Large Broiler House in Central Europe as an Example," Energies, MDPI, vol. 13(6), pages 1-12, March.
    11. Leccese, Francesco & Salvadori, Giacomo & Asdrubali, Francesco & Gori, Paola, 2018. "Passive thermal behaviour of buildings: Performance of external multi-layered walls and influence of internal walls," Applied Energy, Elsevier, vol. 225(C), pages 1078-1089.
    12. Wang, Y. & Mauree, D. & Sun, Q. & Lin, H. & Scartezzini, J.L. & Wennersten, R., 2020. "A review of approaches to low-carbon transition of high-rise residential buildings in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    13. He, Ke-Lun & Chen, Qun & Ma, Huan & Zhao, Tian & Hao, Jun-Hong, 2020. "An isomorphic multi-energy flow modeling for integrated power and thermal system considering nonlinear heat transfer constraint," Energy, Elsevier, vol. 211(C).
    14. Baglivo, Cristina & Congedo, Paolo Maria & D'Agostino, Delia & Zacà, Ilaria, 2015. "Cost-optimal analysis and technical comparison between standard and high efficient mono-residential buildings in a warm climate," Energy, Elsevier, vol. 83(C), pages 560-575.
    15. Leila Luttenberger Marić & Hrvoje Keko & Marko Delimar, 2022. "The Role of Local Aggregator in Delivering Energy Savings to Household Consumers," Energies, MDPI, vol. 15(8), pages 1-27, April.
    16. Mara Hammerle & Paul J. Burke, 2022. "Solar PV and energy poverty in Australia's residential sector," Australian Journal of Agricultural and Resource Economics, Australian Agricultural and Resource Economics Society, vol. 66(4), pages 822-841, October.
    17. Rodrigues, Eugénio & Fernandes, Marco S. & Gaspar, Adélio Rodrigues & Gomes, Álvaro & Costa, José J., 2019. "Thermal transmittance effect on energy consumption of Mediterranean buildings with different thermal mass," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    18. Chau, C.K. & Xu, J.M. & Leung, T.M. & Ng, W.Y., 2017. "Evaluation of the impacts of end-of-life management strategies for deconstruction of a high-rise concrete framed office building," Applied Energy, Elsevier, vol. 185(P2), pages 1595-1603.
    19. Buratti, C. & Palladino, D. & Ricciardi, P., 2016. "Application of a new 13-value thermal comfort scale to moderate environments," Applied Energy, Elsevier, vol. 180(C), pages 859-866.
    20. Taleghani, Mohammad & Tenpierik, Martin & Kurvers, Stanley & van den Dobbelsteen, Andy, 2013. "A review into thermal comfort in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 201-215.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:9:p:3061-:d:799530. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.