IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i22p8708-d978129.html
   My bibliography  Save this article

Numerical Study on Particulate Fouling Characteristics of Flue with a Particulate Fouling Model Considering Deposition and Removal Mechanisms

Author

Listed:
  • Peng Liu

    (School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China)

  • Wei Liu

    (School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China)

  • Kexin Gong

    (School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China)

  • Chengjun Han

    (Dalian Huarui Heavy Industry Group Co., Ltd., Dalian 116013, China)

  • Hong Zhang

    (Dalian Huarui Heavy Industry Group Co., Ltd., Dalian 116013, China)

  • Zhucheng Sui

    (Dalian Huarui Heavy Industry Group Co., Ltd., Dalian 116013, China)

  • Renguo Hu

    (Dalian Huarui Heavy Industry Group Co., Ltd., Dalian 116013, China)

Abstract

Due to a large amount of particulate matter in industrial flue gas, the formation of particulate deposits on the flue wall will increase the instability of equipment operation, which needs to be solved urgently. In this paper, a numerical investigation on the characteristics of particulate deposition and removal in the furnace flue was carried out for waste heat and energy recovery. This research adopted a comprehensive fouling model combined with the discrete phase model (DPM) which was performed by the CFD framework and extended by user-defined functions (UDFs). Firstly, the particulate deposition and removal algorithms were proposed to develop the judgment criterion of particle fouling based on the Grant and Tabakoff particle–wall rebound model and the Johnson–Kendall–Roberts (JKR) theory. This model not only considered the particles transport, sticking, rebound, and removal behaviors, but also analyzed the deposition occurring through the multiple impactions of particles with the flue wall. Then, the influence of furnace gas velocity, particle concentration, and inflection angle α of the tee section on the particulate fouling were predicted. The results show that the furnace gas velocity, particle concentration, and flue structure have significant effects on particle fouling and distribution, and the particle fouling mainly occurs in the blind elbow section and the tee sections of the flue. In addition, the fouling mass of particles decreases with an increasing furnace gas velocity and the decrease in particle concentration. Lastly, the fouling mass of particles decreases with the increase in the inflection angle α of the tee section, and the location of particle fouling gradually transfers from the blind elbow section to the tee section.

Suggested Citation

  • Peng Liu & Wei Liu & Kexin Gong & Chengjun Han & Hong Zhang & Zhucheng Sui & Renguo Hu, 2022. "Numerical Study on Particulate Fouling Characteristics of Flue with a Particulate Fouling Model Considering Deposition and Removal Mechanisms," Energies, MDPI, vol. 15(22), pages 1-22, November.
  • Handle: RePEc:gam:jeners:v:15:y:2022:i:22:p:8708-:d:978129
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/22/8708/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/15/22/8708/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Abd-Elhady, M.S. & Rindt, C.C.M. & Wijers, J.G. & van Steenhoven, A.A., 2005. "Particulate fouling in waste incinerators as influenced by the critical sticking velocity and layer porosity," Energy, Elsevier, vol. 30(8), pages 1469-1479.
    2. Ke Tian & Zicheng Tang & Jin Wang & Milan Vujanović & Min Zeng & Qiuwang Wang, 2021. "Numerical Investigations of Film Cooling and Particle Impact on the Blade Leading Edge," Energies, MDPI, vol. 14(4), pages 1-14, February.
    3. Tong, Zi-Xiang & Li, Ming-Jia & He, Ya-Ling & Tan, Hou-Zhang, 2017. "Simulation of real time particle deposition and removal processes on tubes by coupled numerical method," Applied Energy, Elsevier, vol. 185(P2), pages 2181-2193.
    4. Chen, Zhanxiu & Zheng, Dan & Wang, Jin & Chen, Lei & Sundén, Bengt, 2020. "Experimental investigation on heat transfer characteristics of various nanofluids in an indoor electric heater," Renewable Energy, Elsevier, vol. 147(P1), pages 1011-1018.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Fenghai & Zhao, Chaoyue & Guo, Qianqian & Li, Yang & Fan, Hongli & Guo, Mingxi & Wu, Lishun & Huang, Jiejie & Fang, Yitian, 2020. "Exploration in ash-deposition (AD) behavior modification of low-rank coal by manure addition," Energy, Elsevier, vol. 208(C).
    2. Tang, Song-Zhen & Wang, Fei-Long & He, Ya-Ling & Yu, Yang & Tong, Zi-Xiang, 2019. "Parametric optimization of H-type finned tube with longitudinal vortex generators by response surface model and genetic algorithm," Applied Energy, Elsevier, vol. 239(C), pages 908-918.
    3. Tong, Zi-Xiang & Li, Ming-Jia & He, Ya-Ling & Tan, Hou-Zhang, 2017. "Simulation of real time particle deposition and removal processes on tubes by coupled numerical method," Applied Energy, Elsevier, vol. 185(P2), pages 2181-2193.
    4. Wen Wang & Yan Yan & Yeqi Zhou & Jiahuan Cui, 2022. "Review of Advanced Effusive Cooling for Gas Turbine Blades," Energies, MDPI, vol. 15(22), pages 1-28, November.
    5. Kuruneru, Sahan Trushad Wickramasooriya & Sauret, Emilie & Saha, Suvash Chandra & Gu, YuanTong, 2016. "Numerical investigation of the temporal evolution of particulate fouling in metal foams for air-cooled heat exchangers," Applied Energy, Elsevier, vol. 184(C), pages 531-547.
    6. Cai, Yongtie & Tay, Kunlin & Zheng, Zhimin & Yang, Wenming & Wang, Hui & Zeng, Guang & Li, Zhiwang & Keng Boon, Siah & Subbaiah, Prabakaran, 2018. "Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review," Applied Energy, Elsevier, vol. 230(C), pages 1447-1544.
    7. Zhiming Qiao & Hongjun Xiang & Genrong Cao & Zhibo Qiao & Qing’ao Lv & Xichao Yuan & Lei Chen, 2022. "Simulation Analysis of Emptying the Explosives in Projectiles with Electromagnetic Heating," Energies, MDPI, vol. 16(1), pages 1-12, December.
    8. Zheng, Zhimin & Yang, Wenming & Wang, Hui & Zhou, Anqi & Cai, Yongtie & Zeng, Guang & Xu, Hongpeng, 2021. "Development of a mechanistic fouling model for predicting deposit formation in a woodchip-fired grate boiler," Energy, Elsevier, vol. 220(C).
    9. Shen, Chao & Lv, Guoquan & Wei, Shen & Zhang, Chunxiao & Ruan, Changyun, 2020. "Investigating the performance of a novel solar lighting/heating system using spectrum-sensitive nanofluids," Applied Energy, Elsevier, vol. 270(C).
    10. Zhang, Tianyi & Chen, Lei & Wang, Jin, 2023. "Multi-objective optimization of elliptical tube fin heat exchangers based on neural networks and genetic algorithm," Energy, Elsevier, vol. 269(C).
    11. Gong, Yan & Zhang, Qing & Guo, Qinghua & Xue, Zhicun & Wang, Fuchen & Yu, Guangsuo, 2017. "Vision-based investigation on the ash/slag particle deposition characteristics in an impinging entrained-flow gasifier," Applied Energy, Elsevier, vol. 206(C), pages 1184-1193.
    12. Yiming Li & Fujun Sun & Wenbin Shi & Xingan Liu & Tianlai Li, 2022. "Numerical Simulation of Ventilation Performance in Mushroom Solar Greenhouse Design," Energies, MDPI, vol. 15(16), pages 1-18, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:22:p:8708-:d:978129. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.