IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i19p7083-d926167.html
   My bibliography  Save this article

How to Train an Artificial Neural Network to Predict Higher Heating Values of Biofuel

Author

Listed:
  • Anna Matveeva

    (Institute of Solid State Chemistry and Mechanochemistry, 18 Kutateladze Str., 630090 Novosibirsk, Russia)

  • Aleksey Bychkov

    (Institute of Solid State Chemistry and Mechanochemistry, 18 Kutateladze Str., 630090 Novosibirsk, Russia
    Department of Business, Novosibirsk State Technical University, 20 Karl Marx Ave., 630073 Novosibirsk, Russia)

Abstract

Plant biomass is one of the most promising and easy-to-use sources of renewable energy. Direct determination of higher heating values of fuel in an adiabatic calorimeter is too expensive and time-consuming to be used as a routine analysis. Indirect calculation of higher heating values using the data from the ultimate and proximate analyses is a more rapid and less equipment-intensive method. This study assessed the fitting performance of a multilayer perceptron as an artificial neural network for estimating higher heating values of biomass. The analysis was conducted using a specially gathered large and heterogeneous dataset (720 biomass samples) that included the experimental data of ultimate and proximate analysis on grass plants, peat, husks and shells, organic residues, municipal solid wastes, sludge, straw, and untreated wood. The quantity and preprocessing of data (namely, rejection of dependent and noisy variables; dataset centralization) were shown to make a major contribution to prediction accuracy improvement. In particular, it was demonstrated that 550 samples are sufficient to ensure convergence of the algorithm; carbon and hydrogen contents are sufficient ultimate analysis data; and volatile matters can be excluded from proximate analysis. The minimal required complexity of neural network is ~50 neurons.

Suggested Citation

  • Anna Matveeva & Aleksey Bychkov, 2022. "How to Train an Artificial Neural Network to Predict Higher Heating Values of Biofuel," Energies, MDPI, vol. 15(19), pages 1-13, September.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:19:p:7083-:d:926167
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/19/7083/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/19/7083/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Xing, Jiangkuan & Luo, Kun & Wang, Haiou & Gao, Zhengwei & Fan, Jianren, 2019. "A comprehensive study on estimating higher heating value of biomass from proximate and ultimate analysis with machine learning approaches," Energy, Elsevier, vol. 188(C).
    2. Dafnomilis, Ioannis & Hoefnagels, Ric & Pratama, Yudistira W. & Schott, Dingena L. & Lodewijks, Gabriel & Junginger, Martin, 2017. "Review of solid and liquid biofuel demand and supply in Northwest Europe towards 2030 – A comparison of national and regional projections," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 31-45.
    3. Ekaterina S. Titova, 2019. "Biofuel Application as a Factor of Sustainable Development Ensuring: The Case of Russia," Energies, MDPI, vol. 12(20), pages 1-30, October.
    4. Diana Goettsch & Krystel K. Castillo-Villar & Maria Aranguren, 2020. "Machine-Learning Methods to Select Potential Depot Locations for the Supply Chain of Biomass Co-Firing," Energies, MDPI, vol. 13(24), pages 1-18, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mahyar Jahaninasab & Ehsan Taheran & S. Alireza Zarabadi & Mohammadreza Aghaei & Ali Rajabpour, 2023. "A Novel Approach for Reducing Feature Space Dimensionality and Developing a Universal Machine Learning Model for Coated Tubes in Cross-Flow Heat Exchangers," Energies, MDPI, vol. 16(13), pages 1-13, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Przemysław Motyl & Danuta Król & Sławomir Poskrobko & Marek Juszczak, 2020. "Numerical Modelling and Experimental Verification of the Low-Emission Biomass Combustion Process in a Domestic Boiler with Flue Gas Flow around the Combustion Chamber," Energies, MDPI, vol. 13(21), pages 1-16, November.
    2. Kim, Jun Young & Kim, Dongjae & Li, Zezhong John & Dariva, Claudio & Cao, Yankai & Ellis, Naoko, 2023. "Predicting and optimizing syngas production from fluidized bed biomass gasifiers: A machine learning approach," Energy, Elsevier, vol. 263(PC).
    3. Elena Tamburini & Mattias Gaglio & Giuseppe Castaldelli & Elisa Anna Fano, 2020. "Is Bioenergy Truly Sustainable When Land-Use-Change (LUC) Emissions Are Accounted for? The Case-Study of Biogas from Agricultural Biomass in Emilia-Romagna Region, Italy," Sustainability, MDPI, vol. 12(8), pages 1-20, April.
    4. Chen, Xiaoling & Zhang, Yongxing & Xu, Baoshen & Li, Yifan, 2022. "A simple model for estimation of higher heating value of oily sludge," Energy, Elsevier, vol. 239(PA).
    5. Sabarathinam Srinivasan & Suresh Kumarasamy & Zacharias E. Andreadakis & Pedro G. Lind, 2023. "Artificial Intelligence and Mathematical Models of Power Grids Driven by Renewable Energy Sources: A Survey," Energies, MDPI, vol. 16(14), pages 1-56, July.
    6. Karol Tucki & Remigiusz Mruk & Olga Orynycz & Andrzej Wasiak & Katarzyna Botwińska & Arkadiusz Gola, 2019. "Simulation of the Operation of a Spark Ignition Engine Fueled with Various Biofuels and Its Contribution to Technology Management," Sustainability, MDPI, vol. 11(10), pages 1-17, May.
    7. Fekadu Mosisa Wako & Gianmaria Pio & Ernesto Salzano, 2021. "Laminar Burning Velocity and Ignition Delay Time of Oxygenated Biofuel," Energies, MDPI, vol. 14(12), pages 1-26, June.
    8. Yang, Shiliang & Dong, Ruihan & Du, Yanxiang & Wang, Shuai & Wang, Hua, 2021. "Numerical study of the biomass pyrolysis process in a spouted bed reactor through computational fluid dynamics," Energy, Elsevier, vol. 214(C).
    9. Ivan Brandić & Lato Pezo & Nikola Bilandžija & Anamarija Peter & Jona Šurić & Neven Voća, 2023. "Comparison of Different Machine Learning Models for Modelling the Higher Heating Value of Biomass," Mathematics, MDPI, vol. 11(9), pages 1-14, April.
    10. Glasenapp, S. & Fonseca, M. & Weimar, H. & Döring, P. & Aguilar, F.X., 2021. "Conversion factors for residential wood energy in the European Union: an introduction to harmonizing units of measurement," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    11. Esraa Q. Shehab & Farah Faaq Taha & Sabih Hashim Muhodir & Hamza Imran & Krzysztof Adam Ostrowski & Marcin Piechaczek, 2024. "Gradient Boosting Regression Tree Optimized with Slime Mould Algorithm to Predict the Higher Heating Value of Municipal Solid Waste," Energies, MDPI, vol. 17(17), pages 1-19, August.
    12. Dafnomilis, I. & Duinkerken, M.B. & Junginger, M. & Lodewijks, G. & Schott, D.L., 2018. "Optimal equipment deployment for biomass terminal operations," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 115(C), pages 147-163.
    13. Fan, Yee Van & Romanenko, Sergey & Gai, Limei & Kupressova, Ekaterina & Varbanov, Petar Sabev & Klemeš, Jiří Jaromír, 2021. "Biomass integration for energy recovery and efficient use of resources: Tomsk Region," Energy, Elsevier, vol. 235(C).
    14. Onsree, Thossaporn & Tippayawong, Nakorn & Phithakkitnukoon, Santi & Lauterbach, Jochen, 2022. "Interpretable machine-learning model with a collaborative game approach to predict yields and higher heating value of torrefied biomass," Energy, Elsevier, vol. 249(C).
    15. Ivan Brandić & Alan Antonović & Lato Pezo & Božidar Matin & Tajana Krička & Vanja Jurišić & Karlo Špelić & Mislav Kontek & Juraj Kukuruzović & Mateja Grubor & Ana Matin, 2023. "Energy Potentials of Agricultural Biomass and the Possibility of Modelling Using RFR and SVM Models," Energies, MDPI, vol. 16(2), pages 1-10, January.
    16. Prince Waqas Khan & Yongjun Kim & Yung-Cheol Byun & Sang-Joon Lee, 2021. "Influencing Factors Evaluation of Machine Learning-Based Energy Consumption Prediction," Energies, MDPI, vol. 14(21), pages 1-22, November.
    17. Kartal, Furkan & Özveren, Uğur, 2022. "Prediction of torrefied biomass properties from raw biomass," Renewable Energy, Elsevier, vol. 182(C), pages 578-591.
    18. Rafael Estevez & Laura Aguado-Deblas & Alejandro Posadillo & Beatriz Hurtado & Felipa M. Bautista & José M. Hidalgo & Carlos Luna & Juan Calero & Antonio A. Romero & Diego Luna, 2019. "Performance and Emission Quality Assessment in a Diesel Engine of Straight Castor and Sunflower Vegetable Oils, in Diesel/Gasoline/Oil Triple Blends," Energies, MDPI, vol. 12(11), pages 1-13, June.
    19. Büyükkanber, Kaan & Haykiri-Acma, Hanzade & Yaman, Serdar, 2023. "Calorific value prediction of coal and its optimization by machine learning based on limited samples in a wide range," Energy, Elsevier, vol. 277(C).
    20. Inioluwa Christianah Afolabi & Emmanuel I. Epelle & Burcu Gunes & Fatih Güleç & Jude A. Okolie, 2022. "Data-Driven Machine Learning Approach for Predicting the Higher Heating Value of Different Biomass Classes," Clean Technol., MDPI, vol. 4(4), pages 1-15, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:19:p:7083-:d:926167. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.