IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i21p7323-d672252.html
   My bibliography  Save this article

A Validation Study for RANS Based Modelling of Swirling Pulverized Fuel Flames

Author

Listed:
  • Ali Cemal Benim

    (Center of Flow Simulation (CFS), Department of Mechanical and Process Engineering, Duesseldorf University of Applied Sciences, Muenstersr. 156, D-40476 Duesseldorf, Germany)

  • Cansu Deniz Canal

    (Center of Flow Simulation (CFS), Department of Mechanical and Process Engineering, Duesseldorf University of Applied Sciences, Muenstersr. 156, D-40476 Duesseldorf, Germany
    Faculty of Mechanical Engineering, Istanbul Technical University, Istanbul 34437, Turkey)

  • Yakup Erhan Boke

    (Faculty of Mechanical Engineering, Istanbul Technical University, Istanbul 34437, Turkey)

Abstract

A swirling pulverized coal flame is computationally investigated. A Eulerian–Lagrangian formulation is used to describe the two-phase flow. Turbulence is modelled within a RANS (Reynolds averaged numerical simulation) framework. Four turbulence viscosity- (TV) based models, namely the standard k-ε model, realizable k-ε model, renormalization group theory k-ε model, and the shear stress transport k-ω model are used. In addition, a Reynolds stress transport model (RSM) is employed. The models are assessed by comparing the predicted velocity fields with the measurements of other authors. In terms of overall average values, the agreement of the predictions to the measurements is observed to be within the range 20–40%. A better performance of the RSM compared to the TV models is observed, with a nearly twice as better overall agreement to the experiments, particularly for the swirl velocity. In the second part of the investigation, the resolution of the discrete particle phase in modelling the turbulent particle dispersion (TPD) and particle size distribution (SD) is investigated. Using the discrete random walk model for the TPD, it is shown that even five random walks are sufficient for an accuracy that is quite high, with a less than 1% mean deviation from the solution obtained by thirty random walks. The approximation of the measured SD is determined by a continuous Rosin–Rammler distribution function, and inaccuracies that can occur in its subsequent discretization are demonstrated and discussed. An investigation on the resolution of the SD by discrete particle size classes (SC) indicates that 12 SC are required for an accuracy with a less than 1% mean deviation from the solution with 18 SC. Although these numbers may not necessarily be claimed to be sufficiently universal, they may serve as guidance, at least for SD with similar characteristics.

Suggested Citation

  • Ali Cemal Benim & Cansu Deniz Canal & Yakup Erhan Boke, 2021. "A Validation Study for RANS Based Modelling of Swirling Pulverized Fuel Flames," Energies, MDPI, vol. 14(21), pages 1-33, November.
  • Handle: RePEc:gam:jeners:v:14:y:2021:i:21:p:7323-:d:672252
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/21/7323/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/14/21/7323/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ming Dong & Sufen Li & Jun Xie & Jian Han, 2013. "Experimental Studies on the Normal Impact of Fly Ash Particles with Planar Surfaces," Energies, MDPI, vol. 6(7), pages 1-18, July.
    2. Benim, Ali Cemal & Pfeiffelmann, Björn & Ocłoń, Paweł & Taler, Jan, 2019. "Computational investigation of a lifted hydrogen flame with LES and FGM," Energy, Elsevier, vol. 173(C), pages 1172-1181.
    3. Justina Jaseliūnaitė & Mantas Povilaitis & Ieva Stučinskaitė, 2021. "RANS- and TFC-Based Simulation of Turbulent Combustion in a Small-Scale Venting Chamber," Energies, MDPI, vol. 14(18), pages 1-15, September.
    4. Stroh, Alexander & Alobaid, Falah & Busch, Jan-Peter & Ströhle, Jochen & Epple, Bernd, 2015. "3-D numerical simulation for co-firing of torrefied biomass in a pulverized-fired 1 MWth combustion chamber," Energy, Elsevier, vol. 85(C), pages 105-116.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ming Dong & Jun Xie & Linying Bai & Sufen Li, 2014. "An Experimental Investigation on the Influence of Temperature on the Normal Impact of Fine Particles with a Plane Surface," Energies, MDPI, vol. 7(4), pages 1-16, March.
    2. Ali Cemal Benim & Björn Pfeiffelmann, 2019. "Comparison of Combustion Models for Lifted Hydrogen Flames within RANS Framework," Energies, MDPI, vol. 13(1), pages 1-24, December.
    3. Ramos, Ana & Monteiro, Eliseu & Rouboa, Abel, 2019. "Numerical approaches and comprehensive models for gasification process: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 188-206.
    4. Shuiguang Tong & Xiang Zhang & Zheming Tong & Yanling Wu & Ning Tang & Wei Zhong, 2019. "Online Ash Fouling Prediction for Boiler Heating Surfaces based on Wavelet Analysis and Support Vector Regression," Energies, MDPI, vol. 13(1), pages 1-20, December.
    5. Alobaid, Falah & Ohlemüller, Peter & Ströhle, Jochen & Epple, Bernd, 2015. "Extended Euler–Euler model for the simulation of a 1 MWth chemical–looping pilot plant," Energy, Elsevier, vol. 93(P2), pages 2395-2405.
    6. Rashwan, Sherif S. & Mohany, Atef & Dincer, Ibrahim, 2020. "Investigation of self-induced thermoacoustic instabilities in gas turbine combustors," Energy, Elsevier, vol. 190(C).
    7. Yuanhao Shi & Jie Wen & Fangshu Cui & Jingcheng Wang, 2019. "An Optimization Study on Soot-Blowing of Air Preheaters in Coal-Fired Power Plant Boilers," Energies, MDPI, vol. 12(5), pages 1-15, March.
    8. Jun Xie & Haodong Ma & Chenxi Li & Shaobai Li & Zhengren Zhu & Zheng Fu, 2021. "The Critical Capture Velocity of Coal Ash Particles Oblique Impact on a Stainless Steel Surface," Energies, MDPI, vol. 14(17), pages 1-17, August.
    9. Cai, Yongtie & Tay, Kunlin & Zheng, Zhimin & Yang, Wenming & Wang, Hui & Zeng, Guang & Li, Zhiwang & Keng Boon, Siah & Subbaiah, Prabakaran, 2018. "Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review," Applied Energy, Elsevier, vol. 230(C), pages 1447-1544.
    10. Yuanhao Shi & Qiang Li & Jie Wen & Fangshu Cui & Xiaoqiong Pang & Jianfang Jia & Jianchao Zeng & Jingcheng Wang, 2019. "Soot Blowing Optimization for Frequency in Economizers to Improve Boiler Performance in Coal-Fired Power Plant," Energies, MDPI, vol. 12(15), pages 1-19, July.
    11. Maximilian von Bohnstein & Coskun Yildiz & Lorenz Frigge & Jochen Ströhle & Bernd Epple, 2020. "Simulation Study of the Formation of Corrosive Gases in Coal Combustion in an Entrained Flow Reactor," Energies, MDPI, vol. 13(17), pages 1-24, September.
    12. Tang, Zhenhua & Wang, Zhirong & Zhao, Kun, 2023. "Flame stabilization characteristics of turbulent hydrogen jet flame diluted by nitrogen," Energy, Elsevier, vol. 283(C).
    13. Yin, Chungen, 2020. "Development in biomass preparation for suspension firing towards higher biomass shares and better boiler performance and fuel rangeability," Energy, Elsevier, vol. 196(C).
    14. Alessandro Di Mauro & Marco Ravetto & Prashant Goel & Mirko Baratta & Daniela Anna Misul & Simone Salvadori & Rainer Rothbauer & Riccardo Gretter, 2021. "Modelling Aspects in the Simulation of the Diffusive Flame in A Bluff-Body Geometry," Energies, MDPI, vol. 14(11), pages 1-19, May.
    15. Szufa, S. & Piersa, P. & Junga, R. & Błaszczuk, A. & Modliński, N. & Sobek, S. & Marczak-Grzesik, M. & Adrian, Ł. & Dzikuć, M., 2023. "Numerical modeling of the co-firing process of an in situ steam-torrefied biomass with coal in a 230 MW industrial-scale boiler," Energy, Elsevier, vol. 263(PE).
    16. Ramos, Ana & Monteiro, Eliseu & Silva, Valter & Rouboa, Abel, 2018. "Co-gasification and recent developments on waste-to-energy conversion: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 380-398.
    17. Peng, Yudan & Fu, Guangming & Chen, Jiying & Sun, Baojiang & Sun, Xiaohui, 2024. "Bottom-hole pressure inversion method for nature gas wells based on blowout combustion flame shape parameters," Energy, Elsevier, vol. 294(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:21:p:7323-:d:672252. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.