IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i17p5372-d624605.html
   My bibliography  Save this article

Simulation and Performance Analysis of Air-Type PVT Collector with Interspaced Baffle-PV Cell Design

Author

Listed:
  • Jong-Gwon Ahn

    (Department of Energy Systems Engineering, Kongju National University, Cheonan 31080, Korea)

  • Ji-Suk Yu

    (Department of Energy Systems Engineering, Kongju National University, Cheonan 31080, Korea)

  • Fred Edmond Boafo

    (Green Energy Technology Research Center, Kongju National University, Cheonan 31080, Korea)

  • Jin-Hee Kim

    (Green Energy Technology Research Center, Kongju National University, Cheonan 31080, Korea)

  • Jun-Tae Kim

    (Department of Energy Systems Engineering, Kongju National University, Cheonan 31080, Korea
    Department of Architectural Engineering, Kongju National University, Cheonan 31080, Korea)

Abstract

A Photovoltaic Thermal (PVT) collector produces heat and electricity simultaneously. Air-type PVT collector uses air as a transfer medium to take heat from PV back side surface. The performance of the air-type PVT collector is affected by design elements such as PV types, inside structures in heat collecting space (baffle or fins), the shape of the air pathway, etc. In this study, an advanced air-type PVT collector was designed with curved baffles (absorber) to improve thermal performance. Within the air-type PVT collector, PV cells were arranged in an interspaced design, and the curved baffles were located in the collecting space to increase heat efficiently. The absorber received solar radiation directly and was utilized as baffles for improving thermal performance. The air-type PVT collector was fabricated and tested in an outdoor environment considering the climatic conditions of Daejeon, Republic of Korea. In addition, based on experiment parameters and data, the annual thermal and electrical performances of the system were analyzed by simulation modeling using the TRNSYS program. Thermal and electrical efficiencies were 37.1% and 6.4% (according to module area) for outdoor test conditions, respectively. Numerical and experimental results were in good agreement with an error of 4% and 0.24% for thermal and electrical efficiencies, respectively. Annual heat gain was 644 kWh th /year, and generated power was 118 kWh el /year.

Suggested Citation

  • Jong-Gwon Ahn & Ji-Suk Yu & Fred Edmond Boafo & Jin-Hee Kim & Jun-Tae Kim, 2021. "Simulation and Performance Analysis of Air-Type PVT Collector with Interspaced Baffle-PV Cell Design," Energies, MDPI, vol. 14(17), pages 1-12, August.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:17:p:5372-:d:624605
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/17/5372/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/17/5372/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Shahsavar, Amin & Khanmohammadi, Shoaib & Khaki, Mahsa & Salmanzadeh, Mazyar, 2018. "Performance assessment of an innovative exhaust air energy recovery system based on the PV/T-assisted thermal wheel," Energy, Elsevier, vol. 162(C), pages 682-696.
    2. Fudholi, Ahmad & Zohri, Muhammad & Rukman, Nurul Shahirah Binti & Nazri, Nurul Syakirah & Mustapha, Muslizainun & Yen, Chan Hoy & Mohammad, Masita & Sopian, Kamaruzzaman, 2019. "Exergy and sustainability index of photovoltaic thermal (PVT) air collector: A theoretical and experimental study," Renewable and Sustainable Energy Reviews, Elsevier, vol. 100(C), pages 44-51.
    3. Jin-Hee Kim & Sang-Myung Kim & Jun-Tae Kim, 2021. "Experimental Performance of an Advanced Air-Type Photovoltaic/Thermal (PVT) Collector with Direct Expansion Air Handling Unit (AHU)," Sustainability, MDPI, vol. 13(2), pages 1-10, January.
    4. Golzari, Soudabeh & Kasaeian, Alibakhsh & Amidpour, Majid & Nasirivatan, Shahin & Mousavi, Soroush, 2018. "Experimental investigation of the effects of corona wind on the performance of an air-cooled PV/T," Renewable Energy, Elsevier, vol. 127(C), pages 284-297.
    5. Ji-Suk Yu & Jin-Hee Kim & Jun-Tae Kim, 2020. "Effect of Triangular Baffle Arrangement on Heat Transfer Enhancement of Air-Type PVT Collector," Sustainability, MDPI, vol. 12(18), pages 1-13, September.
    6. Aste, Niccolò & Chiesa, Giancarlo & Verri, Francesco, 2008. "Design, development and performance monitoring of a photovoltaic-thermal (PVT) air collector," Renewable Energy, Elsevier, vol. 33(5), pages 914-927.
    7. Jin-Hee Kim & Jong-Gwon Ahn & Jun-Tae Kim, 2016. "Demonstration of the Performance of an Air-Type Photovoltaic Thermal (PVT) System Coupled with a Heat-Recovery Ventilator," Energies, MDPI, vol. 9(9), pages 1-15, September.
    8. Sang-Myung Kim & Jin-Hee Kim & Jun-Tae Kim, 2019. "Experimental Study on the Thermal and Electrical Characteristics of an Air-Based Photovoltaic Thermal Collector," Energies, MDPI, vol. 12(14), pages 1-14, July.
    9. Chao Zhou & Ruobing Liang & Jili Zhang, 2017. "Optimization Design Method and Experimental Validation of a Solar PVT Cogeneration System Based on Building Energy Demand," Energies, MDPI, vol. 10(9), pages 1-20, August.
    10. Bellos, Evangelos & Tzivanidis, Christos, 2017. "Yearly performance of a hybrid PV operating with nanofluid," Renewable Energy, Elsevier, vol. 113(C), pages 867-884.
    11. Yandri, Erkata, 2017. "The effect of Joule heating to thermal performance of hybrid PVT collector during electricity generation," Renewable Energy, Elsevier, vol. 111(C), pages 344-352.
    12. Yu-Jin Kim & Kwang-Seob Lee & Libing Yang & Evgueniy Entchev & Eun-Chul Kang & Euy-Joon Lee, 2020. "Validation and Numerical Sensitivity Study of Air Baffle Photovoltaic-Thermal Module," Energies, MDPI, vol. 13(8), pages 1-13, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dong-Kai Liu & Chien-Chun Hsieh & Ting-Wei Liao & Chung-Feng Jeffrey Kuo, 2023. "The Use of the Taguchi Method with Grey Relational Analysis for Nanofluid-Phase Change-Optimized Parameter Design at a Rooftop Solar Photovoltaic Thermal Composite Module for Small Households," Sustainability, MDPI, vol. 15(20), pages 1-25, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Abdelrazik, A.S. & Shboul, Bashar & Elwardany, Mohamed & Zohny, R.N. & Osama, Ahmed, 2022. "The recent advancements in the building integrated photovoltaic/thermal (BIPV/T) systems: An updated review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 170(C).
    2. Pang, Wei & Cui, Yanan & Zhang, Qian & Wilson, Gregory.J. & Yan, Hui, 2020. "A comparative analysis on performances of flat plate photovoltaic/thermal collectors in view of operating media, structural designs, and climate conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    3. Shiravi, Amir Hossein & Firoozzadeh, Mohammad & Lotfi, Marzieh, 2022. "Experimental study on the effects of air blowing and irradiance intensity on the performance of photovoltaic modules, using Central Composite Design," Energy, Elsevier, vol. 238(PA).
    4. Byeong-Hwa An & Kwang-Hwan Choi & Hwi-Ung Choi, 2022. "Influence of Triangle-Shaped Obstacles on the Energy and Exergy Performance of an Air-Cooled Photovoltaic Thermal (PVT) Collector," Sustainability, MDPI, vol. 14(20), pages 1-19, October.
    5. Hwi-Ung Choi & Kwang-Hwan Choi, 2022. "Performance Evaluation of PVT Air Collector Coupled with a Triangular Block in Actual Climate Conditions in Korea," Energies, MDPI, vol. 15(11), pages 1-12, June.
    6. Hwi-Ung Choi & Kwang-Hwan Choi, 2020. "Performance Evaluation of PV/T Air Collector Having a Single-Pass Double-Flow Air Channel and Non-Uniform Cross-Section Transverse Rib," Energies, MDPI, vol. 13(9), pages 1-13, May.
    7. Yao, Jian & Dou, Pengbo & Zheng, Sihang & Zhao, Yao & Dai, Yanjun & Zhu, Junjie & Novakovic, Vojislav, 2022. "Co-generation ability investigation of the novel structured PVT heat pump system and its effect on the “Carbon neutral” strategy of Shanghai," Energy, Elsevier, vol. 239(PA).
    8. Sundar, L. Syam & Singh, Manoj K. & Punnaiah, V. & Sousa, Antonio C.M., 2018. "Experimental investigation of Al2O3/water nanofluids on the effectiveness of solar flat-plate collectors with and without twisted tape inserts," Renewable Energy, Elsevier, vol. 119(C), pages 820-833.
    9. Tuncer, Azim Doğuş & Khanlari, Ataollah, 2023. "Improving the performance of a triple-flow solar air collector using recyclable aluminum cans as extended heat transfer surfaces: An energetic, exergetic, economic and environmental survey," Energy, Elsevier, vol. 282(C).
    10. Vengadesan, Elumalai & Senthil, Ramalingam, 2020. "A review on recent developments in thermal performance enhancement methods of flat plate solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    11. Kim, Yu Jin & Entchev, Evgeuniy & Na, Sun Ik & Kang, Eun Chul & Baik, Young-Jin & Lee, Euy Joon, 2023. "Investigation of system optimization and control logic on a solar geothermal hybrid heat pump system based on integral effect test data," Energy, Elsevier, vol. 284(C).
    12. Mohammad K. Najjar & Eduardo Linhares Qualharini & Ahmed W. A. Hammad & Dieter Boer & Assed Haddad, 2019. "Framework for a Systematic Parametric Analysis to Maximize Energy Output of PV Modules Using an Experimental Design," Sustainability, MDPI, vol. 11(10), pages 1-24, May.
    13. Ji-Suk Yu & Jin-Hee Kim & Jun-Tae Kim, 2020. "Effect of Triangular Baffle Arrangement on Heat Transfer Enhancement of Air-Type PVT Collector," Sustainability, MDPI, vol. 12(18), pages 1-13, September.
    14. Paya-Marin, Miguel A. & Roy, Krishanu & Chen, Jian-Fei & Masood, Rehan & Lawson, R. Mark & Gupta, Bhaskar Sen & Lim, James B.P., 2020. "Large-scale experiment of a novel non-domestic building using BPSC systems for energy saving," Renewable Energy, Elsevier, vol. 152(C), pages 799-811.
    15. Ibrahim, Adnan & Othman, Mohd Yusof & Ruslan, Mohd Hafidz & Mat, Sohif & Sopian, Kamaruzzaman, 2011. "Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 352-365, January.
    16. Theodora Karanisa & Yasmine Achour & Ahmed Ouammi & Sami Sayadi, 2022. "Smart greenhouses as the path towards precision agriculture in the food-energy and water nexus: case study of Qatar," Environment Systems and Decisions, Springer, vol. 42(4), pages 521-546, December.
    17. Widyolar, Bennett K. & Abdelhamid, Mahmoud & Jiang, Lun & Winston, Roland & Yablonovitch, Eli & Scranton, Gregg & Cygan, David & Abbasi, Hamid & Kozlov, Aleksandr, 2017. "Design, simulation and experimental characterization of a novel parabolic trough hybrid solar photovoltaic/thermal (PV/T) collector," Renewable Energy, Elsevier, vol. 101(C), pages 1379-1389.
    18. Achour, Yasmine & Ouammi, Ahmed & Zejli, Driss, 2021. "Technological progresses in modern sustainable greenhouses cultivation as the path towards precision agriculture," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).
    19. Spertino, Filippo & Corona, Fabio, 2013. "Monitoring and checking of performance in photovoltaic plants: A tool for design, installation and maintenance of grid-connected systems," Renewable Energy, Elsevier, vol. 60(C), pages 722-732.
    20. Abdelhamid, Mahmoud & Widyolar, Bennett K. & Jiang, Lun & Winston, Roland & Yablonovitch, Eli & Scranton, Gregg & Cygan, David & Abbasi, Hamid & Kozlov, Aleksandr, 2016. "Novel double-stage high-concentrated solar hybrid photovoltaic/thermal (PV/T) collector with nonimaging optics and GaAs solar cells reflector," Applied Energy, Elsevier, vol. 182(C), pages 68-79.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:17:p:5372-:d:624605. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.