IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i14p4333-d596627.html
   My bibliography  Save this article

Combustion Characteristics of 0.5 MW Class Oxy-Fuel FGR (Flue Gas Recirculation) Boiler for CO 2 Capture

Author

Listed:
  • Joon Ahn

    (School of Mechanical Engineering, Kookmin University, Seoul 02707, Korea)

  • Hyouck-Ju Kim

    (Korea Institute of Energy Research, Daejeon 34129, Korea)

Abstract

A 0.5 MW class oxy-fuel boiler was developed to capture CO 2 from exhaust gas. We adopted natural gas as the fuel for industrial boilers and identified characteristics different from those of pulverized coal, which has been studied for power plants. We also examined oxy-fuel combustion without flue gas recirculation (FGR), which is not commonly adopted in power plant boilers. Oxy-fuel combustion involves a stretched flame that uniformly heats the combustion chamber. In oxy-natural-gas FGR combustion, water vapor was included in the recirculated gas and the flame was stabilized when the oxygen concentration of the oxidizer was 32% or more. While flame delay was observed at a partial load for oxy-natural-gas FGR combustion, it was not observed for other combustion modes. In oxy-fuel combustion, the flow rate and flame fullness decrease but, except for the upstream region, the temperature near the wall is distributed not lower than that for air combustion because of the effect of gas radiation. For this combustion, while the heat flux is lower than other modes in the upstream region, it is more than 60% larger in the downstream region. When oxy-fuel and FGR combustion were employed in industrial boilers, more than 90% of CO 2 was obtained, enabling capture, sequestration, and boiler performance while satisfying exhaust gas regulations.

Suggested Citation

  • Joon Ahn & Hyouck-Ju Kim, 2021. "Combustion Characteristics of 0.5 MW Class Oxy-Fuel FGR (Flue Gas Recirculation) Boiler for CO 2 Capture," Energies, MDPI, vol. 14(14), pages 1-13, July.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:14:p:4333-:d:596627
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/14/4333/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/14/4333/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Oh, Jeongseog & Noh, Dongsoon, 2015. "Flame characteristics of a non-premixed oxy-fuel jet in a lab-scale furnace," Energy, Elsevier, vol. 81(C), pages 328-343.
    2. Zong Woo Geem & Jin-Hong Kim, 2016. "Optimal Energy Mix with Renewable Portfolio Standards in Korea," Sustainability, MDPI, vol. 8(5), pages 1-14, May.
    3. Gaber, Christian & Schluckner, Christoph & Wachter, Philipp & Demuth, Martin & Hochenauer, Christoph, 2021. "Experimental study on the influence of the nitrogen concentration in the oxidizer on NOx and CO emissions during the oxy-fuel combustion of natural gas," Energy, Elsevier, vol. 214(C).
    4. Park, Nyun-Bae & Park, Sang Yong & Kim, Jong-Jin & Choi, Dong Gu & Yun, Bo Yeong & Hong, Jong Chul, 2017. "Technical and economic potential of highly efficient boiler technologies in the Korean industrial sector," Energy, Elsevier, vol. 121(C), pages 884-891.
    5. Wu, Hai-bo & Xu, Ming-xin & Li, Yan-bing & Wu, Jin-hua & Shen, Jian-chong & Liao, Haiyan, 2020. "Experimental research on the process of compression and purification of CO2 in oxy-fuel combustion," Applied Energy, Elsevier, vol. 259(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zixue Luo & Zixuan Feng & Bo Wu & Qiang Cheng, 2022. "Decoupling Investigation of Furnace Side and Evaporation System in a Pulverized-Coal Oxy-Fuel Combustion Boiler," Energies, MDPI, vol. 15(7), pages 1-12, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bojana Škrbić & Željko Đurišić, 2023. "Novel Planning Methodology for Spatially Optimized RES Development Which Minimizes Flexibility Requirements for Their Integration into the Power System," Energies, MDPI, vol. 16(7), pages 1-34, April.
    2. Yuan, Ye & Li, GuoXiu & Sun, ZuoYu & Li, HongMeng & Zhou, ZiHang, 2016. "Experimental study on the dynamical features of a partially premixed methane jet flame in coflow," Energy, Elsevier, vol. 111(C), pages 593-598.
    3. Rashwan, Sherif S. & Ibrahim, Abdelmaged H. & Abou-Arab, Tharwat W. & Nemitallah, Medhat A. & Habib, Mohamed A., 2017. "Experimental study of atmospheric partially premixed oxy-combustion flames anchored over a perforated plate burner," Energy, Elsevier, vol. 122(C), pages 159-167.
    4. Lazaroiu, Gheorghe & Pop, Elena & Negreanu, Gabriel & Pisa, Ionel & Mihaescu, Lucian & Bondrea, Andreya & Berbece, Viorel, 2017. "Biomass combustion with hydrogen injection for energy applications," Energy, Elsevier, vol. 127(C), pages 351-357.
    5. Lee, Hwarang, 2023. "Decarbonization strategies for steel production with uncertainty in hydrogen direct reduction," Energy, Elsevier, vol. 283(C).
    6. De Giorgi, Maria Grazia & Ficarella, Antonio & Sciolti, Aldebara & Pescini, Elisa & Campilongo, Stefano & Di Lecce, Giorgio, 2017. "Improvement of lean flame stability of inverse methane/air diffusion flame by using coaxial dielectric plasma discharge actuators," Energy, Elsevier, vol. 126(C), pages 689-706.
    7. Sung-Yoon Huh & Chul-Yong Lee, 2017. "A Demand-Side Perspective on Developing a Future Electricity Generation Mix: Identifying Heterogeneity in Social Preferences," Energies, MDPI, vol. 10(8), pages 1-19, August.
    8. Yun, Yunyun & Zhang, Dahai & Yang, Shengchun & Li, Yaping & Yan, Jiahao, 2023. "Low-carbon optimal dispatch of integrated energy system considering the operation of oxy-fuel combustion coupled with power-to-gas and hydrogen-doped gas equipment," Energy, Elsevier, vol. 283(C).
    9. Liu, Lijuan & Zhang, Qi, 2019. "Flame range and energy output in two-phase propylene oxide/air mixtures beyond the original premixed zone," Energy, Elsevier, vol. 171(C), pages 666-677.
    10. Dallavalle, Elisa & Zanuttigh, Barbara & Contestabile, Pasquale & Giuggioli, Alessandro & Speranza, Davide, 2023. "Improved methodology for the optimal mixing of renewable energy sources and application to a multi-use offshore platform," Renewable Energy, Elsevier, vol. 210(C), pages 575-590.
    11. Xu, Ming-Xin & Wu, Hai-Bo & Wu, Ya-Chang & Wang, Han-Xiao & Ouyang, Hao-Dong & Lu, Qiang, 2021. "Design and evaluation of a novel system for the flue gas compression and purification from the oxy-fuel combustion process," Applied Energy, Elsevier, vol. 285(C).
    12. Maria Grazia De Giorgi & Aldebara Sciolti & Stefano Campilongo & Antonio Ficarella, 2017. "Flame Structure and Chemiluminescence Emissions of Inverse Diffusion Flames under Sinusoidally Driven Plasma Discharges," Energies, MDPI, vol. 10(3), pages 1-15, March.
    13. Kougias, Ioannis & Szabó, Sándor & Nikitas, Alexandros & Theodossiou, Nicolaos, 2019. "Sustainable energy modelling of non-interconnected Mediterranean islands," Renewable Energy, Elsevier, vol. 133(C), pages 930-940.
    14. Maria Grazia De Giorgi & Antonio Ficarella & Donato Fontanarosa & Elisa Pescini & Antonio Suma, 2020. "Investigation of the Effects of Plasma Discharges on Methane Decomposition for Combustion Enhancement of a Lean Flame," Energies, MDPI, vol. 13(6), pages 1-19, March.
    15. Choi, Sun & Kim, Tae Young & Kim, Hee Kyung & Koo, Jaye & Kim, Jeong Soo & Kwon, Oh Chae, 2015. "Properties of inverse nonpremixed pure O2/CH4 coflow flames in a model combustor," Energy, Elsevier, vol. 93(P1), pages 1105-1115.
    16. Yuyang Yuan & Lei Wang & Yaming Zhuang & Ying Wu & Xiaotao Bi, 2024. "Energy and Economic Assessment of Oxy-Fuel Combustion CO 2 Capture in Coal-Fired Power Plants," Energies, MDPI, vol. 17(18), pages 1-18, September.
    17. Majidi, Majid & Nojavan, Sayyad & Zare, Kazem, 2017. "A cost-emission framework for hub energy system under demand response program," Energy, Elsevier, vol. 134(C), pages 157-166.
    18. Bogdan Popa & Otilia Nedelcu & Florica Popa & Khalid Ahmad-Rashid & Eliza-Isabela Tică, 2021. "Small Hydropower Plant for Sustainable Electricity from RES Mix," Sustainability, MDPI, vol. 13(22), pages 1-14, November.
    19. Ghazanfar Mehdi & Sara Bonuso & Maria Grazia De Giorgi, 2021. "Effects of Nanosecond Repetitively Pulsed Discharges Timing for Aeroengines Ignition at Low Temperature Conditions by Needle-Ring Plasma Actuator," Energies, MDPI, vol. 14(18), pages 1-19, September.
    20. Duong, Van Minh & Flener, Ursula & Hrbek, Jitka & Hofbauer, Hermann, 2022. "Emission characteristics from the combustion of Acacia Mangium in the automatic feeding pellet stove," Renewable Energy, Elsevier, vol. 186(C), pages 183-194.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:14:p:4333-:d:596627. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.