IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i17p4360-d403313.html
   My bibliography  Save this article

Numerical Modeling and Performance Evaluation of Standing Wave Thermoacoustic Refrigerators with a Multi-Layered Stack

Author

Listed:
  • Umar Nawaz Bhatti

    (Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia)

  • Salem Bashmal

    (Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia)

  • Sikandar Khan

    (Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia)

  • Rached Ben-Mansour

    (Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia)

Abstract

Thermoacoustic refrigerators have huge potential to replace conventional refrigeration systems as an alternative clean refrigeration technology. These devices utilize conversion of acoustic power and heat energy to generate the desired cooling. The stack plays a pivotal role in the performance of Standing Wave Thermoacoustic Refrigerators (SWTARs), as the heat transfer takes place across it. Performance of stacks can be significantly improved by making an arrangement of different materials inside the stack, resulting in anisotropic thermal properties along the length. In the present numerical study, the effect of multi-layered stack on the refrigeration performance of a SWTAR has been evaluated in terms of temperature drop across the stack, acoustic power consumed and device Coefficient of Performance (COP). Two different aspects of multi-layered stack, namely, different material combinations and different lengths of stacked layers, have been investigated. The combinations of four stack materials and length ratios have been investigated. The numerical results showed that multi-layered stacks produce lower refrigeration temperatures, consume less energy and have higher COP value than their homogeneous counterparts. Among all the material combinations of multi-layered stack investigated, stacks composed of a material layer with low thermal conductivity at the ends, i.e., RVC, produced the best performance with an increase of 26.14% in temperature drop value, reduction in the acoustic power consumption by 4.55% and COP enhancement of 5.12%. The results also showed that, for a constant overall length, an increase in length of side stacked material layer results in an increase in values of both temperature drop and COP.

Suggested Citation

  • Umar Nawaz Bhatti & Salem Bashmal & Sikandar Khan & Rached Ben-Mansour, 2020. "Numerical Modeling and Performance Evaluation of Standing Wave Thermoacoustic Refrigerators with a Multi-Layered Stack," Energies, MDPI, vol. 13(17), pages 1-25, August.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:17:p:4360-:d:403313
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/17/4360/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/17/4360/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zolpakar, Nor Atiqah & Mohd-Ghazali, Normah & Hassan El-Fawal, Mawahib, 2016. "Performance analysis of the standing wave thermoacoustic refrigerator: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 626-634.
    2. Boe-Shong Hong & Tsu-Yu Lin, 2015. "System Identification and Resonant Control of Thermoacoustic Engines for Robust Solar Power," Energies, MDPI, vol. 8(5), pages 1-22, May.
    3. Fabio Auriemma & Elio Di Giulio & Marialuisa Napolitano & Raffaele Dragonetti, 2020. "Porous Cores in Small Thermoacoustic Devices for Building Applications," Energies, MDPI, vol. 13(11), pages 1-19, June.
    4. Tsuda, Kenichiro & Ueda, Yuki, 2017. "Critical temperature of traveling- and standing-wave thermoacoustic engines using a wet regenerator," Applied Energy, Elsevier, vol. 196(C), pages 62-67.
    5. Ahmed Hamood & Artur J. Jaworski & Xiaoan Mao, 2019. "Development and Assessment of Two-Stage Thermoacoustic Electricity Generator," Energies, MDPI, vol. 12(9), pages 1-18, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jakub Kajurek & Artur Rusowicz, 2020. "Experimental Investigation on the Thermoacoustic Effect in Easily Accessible Porous Materials," Energies, MDPI, vol. 14(1), pages 1-10, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Geng & Tang, Lihua & Mace, Brian & Yu, Zhibin, 2021. "Multi-physics coupling in thermoacoustic devices: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    2. Jakub Kajurek & Artur Rusowicz, 2020. "Experimental Investigation on the Thermoacoustic Effect in Easily Accessible Porous Materials," Energies, MDPI, vol. 14(1), pages 1-10, December.
    3. Guo, Lixian & Zhao, Dan & Cheng, Li & Dong, Xu & Xu, Jingyuan, 2024. "Enhancing energy conversion performances in standing-wave thermoacoustic engine with externally forcing periodic oscillations," Energy, Elsevier, vol. 292(C).
    4. Zhang, Yutao & Shi, Xueqiang & Li, Yaqing & Zhang, Yuanbo & Liu, Yurui, 2020. "Characteristics of thermoacoustic conversion and coupling effect at different temperature gradients," Energy, Elsevier, vol. 197(C).
    5. Luo, Jiaqi & Zhou, Qiang & Jin, Tao, 2023. "Theoretical and experimental investigation of acoustic field adjustment of a gas-liquid standing-wave thermoacoustic engine," Energy, Elsevier, vol. 276(C).
    6. Chen, Geng & Wang, Yufan & Tang, Lihua & Wang, Kai & Yu, Zhibin, 2020. "Large eddy simulation of thermally induced oscillatory flow in a thermoacoustic engine," Applied Energy, Elsevier, vol. 276(C).
    7. Tan, Jingqi & Wei, Jianjian & Jin, Tao, 2020. "Electrical-analogy network model of a modified two-phase thermofluidic oscillator with regenerator for low-grade heat recovery," Applied Energy, Elsevier, vol. 262(C).
    8. Sindhu Preetham Burugupally & Leland Weiss, 2018. "Power Generation via Small Length Scale Thermo-Mechanical Systems: Current Status and Challenges, a Review," Energies, MDPI, vol. 11(9), pages 1-22, August.
    9. Armando Di Meglio & Nicola Massarotti, 2022. "CFD Modeling of Thermoacoustic Energy Conversion: A Review," Energies, MDPI, vol. 15(10), pages 1-38, May.
    10. Yang, Rui & Meir, Avishai & Ramon, Guy Z., 2022. "A standing-wave, phase-change thermoacoustic engine: Experiments and model projections," Energy, Elsevier, vol. 258(C).
    11. Wang, Kaixin & Hu, Zhan-Chao, 2023. "Experimental investigation of a novel standing-wave thermoacoustic engine based on PCHE and supercritical CO2," Energy, Elsevier, vol. 282(C).
    12. Meir, Avishai & Offner, Avshalom & Ramon, Guy Z., 2018. "Low-temperature energy conversion using a phase-change acoustic heat engine," Applied Energy, Elsevier, vol. 231(C), pages 372-379.
    13. Jin, Tao & Yang, Rui & Wang, Yi & Liu, Yuanliang & Feng, Ye, 2016. "Phase adjustment analysis and performance of a looped thermoacoustic prime mover with compliance/resistance tube," Applied Energy, Elsevier, vol. 183(C), pages 290-298.
    14. Fabio Auriemma & Elio Di Giulio & Marialuisa Napolitano & Raffaele Dragonetti, 2020. "Porous Cores in Small Thermoacoustic Devices for Building Applications," Energies, MDPI, vol. 13(11), pages 1-19, June.
    15. Yang, Rui & Wang, Junxiang & Luo, Ercang, 2023. "Revisiting the evaporative Stirling engine: The mechanism and a case study via thermoacoustic theory," Energy, Elsevier, vol. 273(C).
    16. Yang, Rui & Meir, Avishai & Ramon, Guy Z., 2020. "Theoretical performance characteristics of a travelling-wave phase-change thermoacoustic engine for low-grade heat recovery," Applied Energy, Elsevier, vol. 261(C).
    17. Hamood, Ahmed & Jaworski, Artur J., 2023. "Thermoacoustic cascade engine free from resonance length," Energy, Elsevier, vol. 271(C).
    18. Artur J. Jaworski, 2019. "Special Issue “Fluid Flow and Heat Transfer”," Energies, MDPI, vol. 12(16), pages 1-4, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:17:p:4360-:d:403313. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.