IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i14p2775-d249829.html
   My bibliography  Save this article

An Enhanced Flow-Thermo-Structural Modeling and Validation for the Integrated Analysis of a Film Cooling Nozzle Guide Vane

Author

Listed:
  • Peng Guan

    (School of Power and Energy, Northwestern Ploytechnical University, Xi’an 710072, China)

  • Yan-Ting Ai

    (Faculty of Aviation Engine, Shenyang Aerospace University, Shenyang 110136, China)

  • Cheng-Wei Fei

    (Department of Aeronautics and Astronautics, Fudan University, Shanghai 200433, China)

Abstract

The target of this paper is to develop an enhanced flow-thermo-structural (FTS) model with high computational accuracy, to perform the integrated analysis of film cooling nozzle guide vane (NGV). An efficient turbulence model and weak spring approach are utilized in the enhanced FTS model. In respect of the power balance principle of aeroengine rotor shaft and temperature test of a typical combustor, the mean temperature inlet and five normalization temperature curves were confirmed, respectively. The temperature-sensitive paint (TSP) technology was used to verify the numerical simulation. From this study, we find that the predicted temperature caters for the TSP test well, between which the maximum error is less than 6%, and the maximum thermal stress is 758 MPa around the hole edges and the location of stress concentration keeps the consistency with that of the cracks. The maximum thermal stress increases by 10% with the increasing inlet temperature and reduces by about 16% with the shifting of flame peak from the outer to inner hub. The prediction provides general information on the initiation of cracks on a vane segment. The developed enhanced FTS model is validated to be workable and precise in the integrated analysis of film cooling NGV. The efforts of this study provide an integrated analysis approach of film cooling NGV and are promising to provide guidance for the integrated design of film cooling components besides NGV.

Suggested Citation

  • Peng Guan & Yan-Ting Ai & Cheng-Wei Fei, 2019. "An Enhanced Flow-Thermo-Structural Modeling and Validation for the Integrated Analysis of a Film Cooling Nozzle Guide Vane," Energies, MDPI, vol. 12(14), pages 1-20, July.
  • Handle: RePEc:gam:jeners:v:12:y:2019:i:14:p:2775-:d:249829
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/14/2775/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/14/2775/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Chung, Heeyoon & Sohn, Ho-Seong & Park, Jun Su & Kim, Kyung Min & Cho, Hyung Hee, 2017. "Thermo-structural analysis of cracks on gas turbine vane segment having multiple airfoils," Energy, Elsevier, vol. 118(C), pages 1275-1285.
    2. Huixiang Chen & Daqing Zhou & Yuan Zheng & Shengwen Jiang & An Yu & You Guo, 2018. "Load Rejection Transient Process Simulation of a Kaplan Turbine Model by Co-Adjusting Guide Vanes and Runner Blades," Energies, MDPI, vol. 11(12), pages 1-18, November.
    3. Kim, Kyung Min & Jeon, Yun Heung & Yun, Namgeon & Lee, Dong Hyun & Cho, Hyung Hee, 2011. "Thermo-mechanical life prediction for material lifetime improvement of an internal cooling system in a combustion liner," Energy, Elsevier, vol. 36(2), pages 942-949.
    4. Kim, Kyung Min & Moon, Hokyu & Park, Jun Su & Cho, Hyung Hee, 2014. "Optimal design of impinging jets in an impingement/effusion cooling system," Energy, Elsevier, vol. 66(C), pages 839-848.
    5. Prasert Prapamonthon & Huazhao Xu & Wenshuo Yang & Jianhua Wang, 2017. "Numerical Study of the Effects of Thermal Barrier Coating and Turbulence Intensity on Cooling Performances of a Nozzle Guide Vane," Energies, MDPI, vol. 10(3), pages 1-16, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ke Tian & Zicheng Tang & Jin Wang & Milan Vujanović & Min Zeng & Qiuwang Wang, 2021. "Numerical Investigations of Film Cooling and Particle Impact on the Blade Leading Edge," Energies, MDPI, vol. 14(4), pages 1-14, February.
    2. Hongjie Tang & Shicheng Zhang & Jinhui Li & Lingwei Kong & Baoqiang Zhang & Fei Xing & Huageng Luo, 2023. "Imprecise P-Box Sensitivity Analysis of an Aero-Engine Combustor Performance Simulation Model Considering Correlated Variables," Energies, MDPI, vol. 16(5), pages 1-22, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chung, Heeyoon & Sohn, Ho-Seong & Park, Jun Su & Kim, Kyung Min & Cho, Hyung Hee, 2017. "Thermo-structural analysis of cracks on gas turbine vane segment having multiple airfoils," Energy, Elsevier, vol. 118(C), pages 1275-1285.
    2. Zhang, Yueliang & Li, Jiangheng & Xie, Jin, 2022. "Effects of lateral cooling hole configuration on a swirl-stabilized combustor," Energy, Elsevier, vol. 259(C).
    3. Qian, Xiaoru & Yan, Peigang & Wang, Xiangfeng & Han, Wanjin, 2023. "Effect of thermal barrier coatings and integrated cooling on the conjugate heat transfer and thermal stress distribution of nickel-based superalloy turbine vanes," Energy, Elsevier, vol. 277(C).
    4. Kanmaniraja Radhakrishnan & Jun Su Park, 2021. "Thermal Analysis and Creep Lifetime Prediction Based on the Effectiveness of Thermal Barrier Coating on a Gas Turbine Combustor Liner Using Coupled CFD and FEM Simulation," Energies, MDPI, vol. 14(13), pages 1-21, June.
    5. Nozari, Mohammadreza & Tabejamaat, Sadegh & Sadeghizade, Hasan & Aghayari, Majid, 2021. "Experimental investigation of the effect of gaseous fuel injector geometry on the pollutant formation and thermal characteristics of a micro gas turbine combustor," Energy, Elsevier, vol. 235(C).
    6. Zheming Tong & Zhongqin Yang & Qing Huang & Qiang Yao, 2022. "Numerical Modeling of the Hydrodynamic Performance of Slanted Axial-Flow Urban Drainage Pumps at Shut-Off Condition," Energies, MDPI, vol. 15(5), pages 1-17, March.
    7. Lioua Kolsi & Fatih Selimefendigil & Kaouther Ghachem & Talal Alqahtani & Salem Algarni, 2022. "Multiple Impinging Jet Cooling of a Wavy Surface by Using Double Porous Fins under Non-Uniform Magnetic Field," Mathematics, MDPI, vol. 10(4), pages 1-20, February.
    8. Prasert Prapamonthon & Soemsak Yooyen & Suwin Sleesongsom & Daniele Dipasquale & Huazhao Xu & Jianhua Wang & Zhaoqing Ke, 2018. "Investigation of Cooling Performances of a Non-Film-Cooled Turbine Vane Coated with a Thermal Barrier Coating Using Conjugate Heat Transfer," Energies, MDPI, vol. 11(4), pages 1-17, April.
    9. Grzegorz Peczkis & Piotr Wiśniewski & Andriy Zahorulko, 2021. "Experimental and Numerical Studies on the Influence of Blade Number in a Small Water Turbine," Energies, MDPI, vol. 14(9), pages 1-15, May.
    10. Kim, Kyung Min & Moon, Hokyu & Park, Jun Su & Cho, Hyung Hee, 2014. "Optimal design of impinging jets in an impingement/effusion cooling system," Energy, Elsevier, vol. 66(C), pages 839-848.
    11. Chen, Huixiang & Zhou, Daqing & Kan, Kan & Guo, Junxun & Zheng, Yuan & Binama, Maxime & Xu, Zhe & Feng, Jiangang, 2021. "Transient characteristics during the co-closing guide vanes and runner blades of a bulb turbine in load rejection process," Renewable Energy, Elsevier, vol. 165(P2), pages 28-41.
    12. Sciubba, Enrico, 2015. "Air-cooled gas turbine cycles – Part 1: An analytical method for the preliminary assessment of blade cooling flow rates," Energy, Elsevier, vol. 83(C), pages 104-114.
    13. Fu, Shifeng & Zheng, Yuan & Kan, Kan & Chen, Huixiang & Han, Xingxing & Liang, Xiaoling & Liu, Huiwen & Tian, Xiaoqing, 2020. "Numerical simulation and experimental study of transient characteristics in an axial flow pump during start-up," Renewable Energy, Elsevier, vol. 146(C), pages 1879-1887.
    14. Park, Jun Su & Park, Sehjin & Kim, Kyung Min & Choi, Beom Seok & Cho, Hyung Hee, 2013. "Effect of the thermal insulation on generator and micro gas turbine system," Energy, Elsevier, vol. 59(C), pages 581-589.
    15. Chao Gao & Yang Liu & Ruquan You & Haiwang Li, 2022. "Theoretical and Numerical Study on Thermal Insulation Performance of Thermal Barrier Coatings," Energies, MDPI, vol. 15(19), pages 1-14, September.
    16. Ke Liu & Feng Yang & Zhiyan Yang & Yunxian Zhu & Yongguang Cheng, 2019. "Runner Lifting-Up during Load Rejection Transients of a Kaplan Turbine: Flow Mechanism and Solution," Energies, MDPI, vol. 12(24), pages 1-15, December.
    17. Chen, Zhimin & Chen, Xuejiao & Yang, XuFei & Yu, Bo & Wang, Bohong & Zhu, Jianqin & Chen, Yujie & Cai, Weihua, 2024. "Numerical study on cooling characteristics of turbine blade based on laminated cooling configuration with clapboards," Energy, Elsevier, vol. 299(C).
    18. Łapka, Piotr & Ciepliński, Adrian & Rusowicz, Artur, 2020. "Numerical model and analysis of heat transfer during microjets array impingement," Energy, Elsevier, vol. 203(C).
    19. Haiwang Li & Dawei Zhang & Ruquan You & Yifan Zou & Song Liu, 2023. "Numerical Investigation of the Effects of the Hole Inclination Angle and Blowing Ratio on the Characteristics of Cooling and Stress in an Impingement/Effusion Cooling System," Energies, MDPI, vol. 16(2), pages 1-25, January.
    20. Tariq, Rasikh & Xamán, J. & Bassam, A. & Ricalde, Luis J. & Soberanis, M.A. Escalante, 2020. "Multidimensional assessment of a photovoltaic air collector integrated phase changing material considering Mexican climatic conditions," Energy, Elsevier, vol. 209(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:14:p:2775-:d:249829. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.