IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2018i1p53-d193056.html
   My bibliography  Save this article

Composites with Excellent Insulation and High Adaptability for Lightweight Envelopes

Author

Listed:
  • Liang Guo

    (Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China)

  • Wenbin Tong

    (Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China)

  • Yexin Xu

    (Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China)

  • Hong Ye

    (Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China)

Abstract

Lightweight insulation materials are widely used in lightweight buildings, cold-chain vehicles and containers. A kind of insulation composite, which can combine the super insulation of state-of-the-art insulation materials or structures and the machinability or adaptability of traditional insulation materials, was proposed. The composite consists of two components, i.e., polyurethane (PU) foam as the base material and vacuum insulation panel (VIP) or silica aerogel as the core material. The core material is in plate shape and covered with the base material on all sides. The thermal conductivity of the core material is nearly one order lower than that of the base material. The effective thermal conductivity of the insulation composite was explored by simulation. Simulation results show that the effective thermal conductivity of the composite increases with the increase of the thermal conductivity of the core material. The effective thermal conductivities of the composites decrease with the increase of the cross-section area of the core material perpendicular to heat flow direction and the thicknesses of the core material parallel with heat flow direction. These rules can be elucidated by a series-parallel mode thermal resistance network method, which was verified by the measured results. For composite with a VIP as the core material, when the cross-section area and thickness of the VIP are respectively larger than 60% and 21% of the composite, the composite’s effective thermal conductivity can be 50% or less than that of the base material. Simulated heat loss of the envelope adopting the insulation composites with VIP as the core material is nearly a half of that of the envelope adopting traditional insulation materials.

Suggested Citation

  • Liang Guo & Wenbin Tong & Yexin Xu & Hong Ye, 2018. "Composites with Excellent Insulation and High Adaptability for Lightweight Envelopes," Energies, MDPI, vol. 12(1), pages 1-10, December.
  • Handle: RePEc:gam:jeners:v:12:y:2018:i:1:p:53-:d:193056
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/1/53/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/1/53/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Alam, M. & Singh, H. & Limbachiya, M.C., 2011. "Vacuum Insulation Panels (VIPs) for building construction industry – A review of the contemporary developments and future directions," Applied Energy, Elsevier, vol. 88(11), pages 3592-3602.
    2. Zhang Yang & Takao Katsura & Masahiro Aihara & Makoto Nakamura & Katsunori Nagano, 2018. "Investigation into Window Insulation Retrofitting of Existing Buildings Using Thin and Translucent Frame-Structure Vacuum Insulation Panels," Energies, MDPI, vol. 11(2), pages 1-13, January.
    3. Zhang Yang & Takao Katsura & Masahiro Aihara & Makoto Nakamura & Katsunori Nagano, 2017. "Development of Numerical Heat Transfer and the Structural Model to Design Slim and Translucent Vacuum Layer Type Insulation Panels to Retrofitting Insulation in Existing Buildings," Energies, MDPI, vol. 10(12), pages 1-15, December.
    4. Schiavoni, S. & D׳Alessandro, F. & Bianchi, F. & Asdrubali, F., 2016. "Insulation materials for the building sector: A review and comparative analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 988-1011.
    5. Biswas, Kaushik & Desjarlais, Andre & Smith, Douglas & Letts, John & Yao, Jennifer & Jiang, Timothy, 2018. "Development and thermal performance verification of composite insulation boards containing foam-encapsulated vacuum insulation panels," Applied Energy, Elsevier, vol. 228(C), pages 1159-1172.
    6. Kalnæs, Simen Edsjø & Jelle, Bjørn Petter, 2014. "Vacuum insulation panel products: A state-of-the-art review and future research pathways," Applied Energy, Elsevier, vol. 116(C), pages 355-375.
    7. Nussbaumer, T. & Wakili, K. Ghazi & Tanner, Ch., 2006. "Experimental and numerical investigation of the thermal performance of a protected vacuum-insulation system applied to a concrete wall," Applied Energy, Elsevier, vol. 83(8), pages 841-855, August.
    8. Kaushik Biswas, 2018. "Development and Validation of Numerical Models for Evaluation of Foam-Vacuum Insulation Panel Composite Boards, Including Edge Effects," Energies, MDPI, vol. 11(9), pages 1-16, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. De Masi, Rosa Francesca & Ruggiero, Silvia & Vanoli, Giuseppe Peter, 2020. "Multi-layered wall with vacuum insulation panels: Results of 5-years in-field monitoring and numerical analysis of aging effect on building consumptions," Applied Energy, Elsevier, vol. 278(C).
    2. Gonçalves, Márcio & Simões, Nuno & Serra, Catarina & Flores-Colen, Inês, 2020. "A review of the challenges posed by the use of vacuum panels in external insulation finishing systems," Applied Energy, Elsevier, vol. 257(C).
    3. Alam, M. & Singh, H. & Suresh, S. & Redpath, D.A.G., 2017. "Energy and economic analysis of Vacuum Insulation Panels (VIPs) used in non-domestic buildings," Applied Energy, Elsevier, vol. 188(C), pages 1-8.
    4. Kaushik Biswas & Rohit Jogineedi & Andre Desjarlais, 2019. "Experimental and Numerical Examination of Naturally-Aged Foam-VIP Composites," Energies, MDPI, vol. 12(13), pages 1-12, July.
    5. Villasmil, Willy & Fischer, Ludger J. & Worlitschek, Jörg, 2019. "A review and evaluation of thermal insulation materials and methods for thermal energy storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 103(C), pages 71-84.
    6. Božiček, D. & Peterková, J. & Zach, J. & Košir, M., 2024. "Vacuum insulation panels: An overview of research literature with an emphasis on environmental and economic studies for building applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PA).
    7. Abdul Mujeebu, Muhammad & Ashraf, Noman & Alsuwayigh, Abdulkarim, 2016. "Energy performance and economic viability of nano aerogel glazing and nano vacuum insulation panel in multi-story office building," Energy, Elsevier, vol. 113(C), pages 949-956.
    8. Biswas, Kaushik & Desjarlais, Andre & Smith, Douglas & Letts, John & Yao, Jennifer & Jiang, Timothy, 2018. "Development and thermal performance verification of composite insulation boards containing foam-encapsulated vacuum insulation panels," Applied Energy, Elsevier, vol. 228(C), pages 1159-1172.
    9. Abdul Mujeebu, Muhammad & Ashraf, Noman & Alsuwayigh, Abdulkarim H., 2016. "Effect of nano vacuum insulation panel and nanogel glazing on the energy performance of office building," Applied Energy, Elsevier, vol. 173(C), pages 141-151.
    10. Chen, Zhou & Chen, Zhaofeng & Yang, Zhaogang & Hu, Jiaming & Yang, Yong & Chang, Lingqian & Lee, L. James & Xu, Tengzhou, 2015. "Preparation and characterization of vacuum insulation panels with super-stratified glass fiber core material," Energy, Elsevier, vol. 93(P1), pages 945-954.
    11. Kaushik Biswas, 2018. "Development and Validation of Numerical Models for Evaluation of Foam-Vacuum Insulation Panel Composite Boards, Including Edge Effects," Energies, MDPI, vol. 11(9), pages 1-16, August.
    12. Kylili, Angeliki & Fokaides, Paris A. & Christou, Petros & Kalogirou, Soteris A., 2014. "Infrared thermography (IRT) applications for building diagnostics: A review," Applied Energy, Elsevier, vol. 134(C), pages 531-549.
    13. Taesub Lim & Jaewang Seok & Daeung Danny Kim, 2017. "A Comparative Study of Energy Performance of Fumed Silica Vacuum Insulation Panels in an Apartment Building," Energies, MDPI, vol. 10(12), pages 1-12, December.
    14. Yang, Yang & Chen, Sarula, 2022. "Thermal insulation solutions for opaque envelope of low-energy buildings: A systematic review of methods and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    15. Li, Xiangyu & Chen, Huisu & Li, Huiqiang & Liu, Lin & Lu, Zeyu & Zhang, Tao & Duan, Wen Hui, 2015. "Integration of form-stable paraffin/nanosilica phase change material composites into vacuum insulation panels for thermal energy storage," Applied Energy, Elsevier, vol. 159(C), pages 601-609.
    16. Elaouzy, Y. & El Fadar, A., 2022. "Energy, economic and environmental benefits of integrating passive design strategies into buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    17. Iole Nardi & Tullio De Rubeis & Edoardo Buzzi & Stefano Sfarra & Dario Ambrosini & Domenica Paoletti, 2016. "Modeling and Optimization of the Thermal Performance of a Wood-Cement Block in a Low-Energy House Construction," Energies, MDPI, vol. 9(9), pages 1-17, August.
    18. Nemanič, V. & Zajec, B. & Žumer, M. & Figar, N. & Kavšek, M. & Mihelič, I., 2014. "Synthesis and characterization of melamine–formaldehyde rigid foams for vacuum thermal insulation," Applied Energy, Elsevier, vol. 114(C), pages 320-326.
    19. Kim, Jongmin & Jang, Choonghyo & Song, Tae-Ho, 2012. "Combined heat transfer in multi-layered radiation shields for vacuum insulation panels: Theoretical/numerical analyses and experiment," Applied Energy, Elsevier, vol. 94(C), pages 295-302.
    20. Long, Linshuang & Ye, Hong & Liu, Minghou, 2016. "A new insight into opaque envelopes in a passive solar house: Properties and roles," Applied Energy, Elsevier, vol. 183(C), pages 685-699.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2018:i:1:p:53-:d:193056. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.