IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v10y2017i5p596-d97148.html
   My bibliography  Save this article

Electricity Production by the Application of a Low Voltage DC-DC Boost Converter to a Continuously Operating Flat-Plate Microbial Fuel Cell

Author

Listed:
  • Young Eun Song

    (School of Chemical and Biomolecular Engineering, Pusan National University, Jangjeon-Dong, Geumjeong-gu, Busan 46241, Korea)

  • Hitesh C. Boghani

    (Sustainable Environment Research Centre (SERC), Faculty of Computing, Engineering and Science, University of South Wales, Pontypridd CF37 1DL, UK)

  • Hong Suck Kim

    (The MFC Research and Business Development (R&BD) Center, K-water Institute, Jeonmin-Dong, Yuseong-Gu, Daejeon 34045, Korea)

  • Byung Goon Kim

    (The MFC Research and Business Development (R&BD) Center, K-water Institute, Jeonmin-Dong, Yuseong-Gu, Daejeon 34045, Korea)

  • Taeho Lee

    (Department of Civil and Environmental Engineering, Pusan National University, Jangjeon-Dong, Geumjeong-gu, Busan 46241, Korea)

  • Byong-Hun Jeon

    (Department of Natural Resources and Environmental Engineering, Hanyang University, Seoul 04763, Korea)

  • Giuliano C. Premier

    (Sustainable Environment Research Centre (SERC), Faculty of Computing, Engineering and Science, University of South Wales, Pontypridd CF37 1DL, UK)

  • Jung Rae Kim

    (School of Chemical and Biomolecular Engineering, Pusan National University, Jangjeon-Dong, Geumjeong-gu, Busan 46241, Korea)

Abstract

An ultra-low voltage customized DC-DC booster circuit was developed using a LTC3108 converter, and used continuously on a flat-plate microbial fuel cell (FPM) system. The boost converter successfully stepped up the microbial fuel cell (MFC) voltage from ~0.5 V to 3.3 and 5.0 V of outputs. The designed circuit and system displayed the dynamic variations of the source FPM as well as the output voltage through the designed three connection points within the booster circuit. The source MFC voltage was interrelated with the booster circuit and its performance, and it adapted to the set points of the booster dynamically. The maximum output power density of the MFC with the DC-DC booster circuit was 8.16 W/m 3 compared to the maximum source FPM input power of 14.27 W/m 3 at 100 Ω, showing a conversion efficiency of 26–57%, but with a 10-fold higher output than that of the source voltage. The combined LTC3108 with FPM supplied power for electronic devices using synthetic and real domestic wastewater. This report presents a promising strategy for utilizing the electrical energy produced from MFCs, and expands the applicability of bioelectrochemical systems with an improved energy efficiency of the present wastewater treatment system.

Suggested Citation

  • Young Eun Song & Hitesh C. Boghani & Hong Suck Kim & Byung Goon Kim & Taeho Lee & Byong-Hun Jeon & Giuliano C. Premier & Jung Rae Kim, 2017. "Electricity Production by the Application of a Low Voltage DC-DC Boost Converter to a Continuously Operating Flat-Plate Microbial Fuel Cell," Energies, MDPI, vol. 10(5), pages 1-16, April.
    • Handle: RePEc:gam:jeners:v:10:y:2017:i:5:p:596-:d:97148
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/10/5/596/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/10/5/596/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Wang, Yun-Hai & Wang, Bai-Shi & Pan, Bin & Chen, Qing-Yun & Yan, Wei, 2013. "Electricity production from a bio-electrochemical cell for silver recovery in alkaline media," Applied Energy, Elsevier, vol. 112(C), pages 1337-1341.
    2. Sevda, Surajbhan & Dominguez-Benetton, Xochitl & Vanbroekhoven, Karolien & De Wever, Heleen & Sreekrishnan, T.R. & Pant, Deepak, 2013. "High strength wastewater treatment accompanied by power generation using air cathode microbial fuel cell," Applied Energy, Elsevier, vol. 105(C), pages 194-206.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jeongjin Yeo & Taeyoung Kim & Jae Kyung Jang & Yoonseok Yang, 2018. "Practical Maximum-Power Extraction in Single Microbial Fuel Cell by Effective Delivery through Power Management System," Energies, MDPI, vol. 11(9), pages 1-11, September.
    2. Jiyun Baek & Changman Kim & Young Eun Song & Hyeon Sung Im & Mutyala Sakuntala & Jung Rae Kim, 2018. "Separation of Acetate Produced from C1 Gas Fermentation Using an Electrodialysis-Based Bioelectrochemical System," Energies, MDPI, vol. 11(10), pages 1-12, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Roustazadeh Sheikhyousefi, P. & Nasr Esfahany, M. & Colombo, A. & Franzetti, A. & Trasatti, S.P. & Cristiani, P., 2017. "Investigation of different configurations of microbial fuel cells for the treatment of oilfield produced water," Applied Energy, Elsevier, vol. 192(C), pages 457-465.
    2. Li, Yan & Williams, Isaiah & Xu, Zhiheng & Li, Baikun & Li, Baitao, 2016. "Energy-positive nitrogen removal using the integrated short-cut nitrification and autotrophic denitrification microbial fuel cells (MFCs)," Applied Energy, Elsevier, vol. 163(C), pages 352-360.
    3. Adrián Hernández-Fernández & Eduardo Iniesta-López & Yolanda Garrido & Ioannis A. Ieropoulos & Francisco J. Hernández-Fernández, 2023. "Microbial Fuel Cell Using a Novel Ionic-Liquid-Type Membrane-Cathode Assembly with Heterotrophic Anodic Denitrification for Slurry Treatment," Sustainability, MDPI, vol. 15(20), pages 1-18, October.
    4. Wang, Zhongli & Zhang, Baogang & Jiang, Yufeng & Li, Yunlong & He, Chao, 2018. "Spontaneous thallium (I) oxidation with electricity generation in single-chamber microbial fuel cells," Applied Energy, Elsevier, vol. 209(C), pages 33-42.
    5. Jianzhong, Liu & Ruikun, Wang & Jianfei, Xi & Junhu, Zhou & Kefa, Cen, 2014. "Pilot-scale investigation on slurrying, combustion, and slagging characteristics of coal slurry fuel prepared using industrial wasteliquid," Applied Energy, Elsevier, vol. 115(C), pages 309-319.
    6. Toczyłowska-Mamińska, Renata & Pielech-Przybylska, Katarzyna & Sekrecka-Belniak, Anna & Dziekońska-Kubczak, Urszula, 2020. "Stimulation of electricity production in microbial fuel cells via regulation of syntrophic consortium development," Applied Energy, Elsevier, vol. 271(C).
    7. Modestra, J. Annie & Reddy, C. Nagendranatha & Krishna, K. Vamshi & Min, Booki & Mohan, S. Venkata, 2020. "Regulated surface potential impacts bioelectrogenic activity, interfacial electron transfer and microbial dynamics in microbial fuel cell," Renewable Energy, Elsevier, vol. 149(C), pages 424-434.
    8. Venkata Mohan, S. & Velvizhi, G. & Annie Modestra, J. & Srikanth, S., 2014. "Microbial fuel cell: Critical factors regulating bio-catalyzed electrochemical process and recent advancements," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 779-797.
    9. Gu, Yifan & Li, Yue & Li, Xuyao & Luo, Pengzhou & Wang, Hongtao & Robinson, Zoe P. & Wang, Xin & Wu, Jiang & Li, Fengting, 2017. "The feasibility and challenges of energy self-sufficient wastewater treatment plants," Applied Energy, Elsevier, vol. 204(C), pages 1463-1475.
    10. ElMekawy, Ahmed & Hegab, Hanaa M. & Vanbroekhoven, Karolien & Pant, Deepak, 2014. "Techno-productive potential of photosynthetic microbial fuel cells through different configurations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 617-627.
    11. Ewing, Timothy & Ha, Phuc Thi & Beyenal, Haluk, 2017. "Evaluation of long-term performance of sediment microbial fuel cells and the role of natural resources," Applied Energy, Elsevier, vol. 192(C), pages 490-497.
    12. Wu, Yi-cheng & Wang, Ze-jie & Zheng, Yue & Xiao, Yong & Yang, Zhao-hui & Zhao, Feng, 2014. "Light intensity affects the performance of photo microbial fuel cells with Desmodesmus sp. A8 as cathodic microorganism," Applied Energy, Elsevier, vol. 116(C), pages 86-90.
    13. Li, Xiaojing & Wang, Xin & Zhang, Yueyong & Ding, Ning & Zhou, Qixing, 2014. "Opening size optimization of metal matrix in rolling-pressed activated carbon air–cathode for microbial fuel cells," Applied Energy, Elsevier, vol. 123(C), pages 13-18.
    14. Chen, Qing-Yun & Fu, Rong & Fang, Xiao-Wen & Cai, Wen-Fang & Wang, Yun-Hai & Cheng, Shao-An, 2015. "Cr-methanol fuel cell for efficient Cr(VI) removal and high power production," Applied Energy, Elsevier, vol. 138(C), pages 31-35.
    15. Santoro, Carlo & Abad, Fernando Benito & Serov, Alexey & Kodali, Mounika & Howe, Kerry J. & Soavi, Francesca & Atanassov, Plamen, 2017. "Supercapacitive microbial desalination cells: New class of power generating devices for reduction of salinity content," Applied Energy, Elsevier, vol. 208(C), pages 25-36.
    16. Kumar, Vikash & Nandy, Arpita & Das, Suparna & Salahuddin, M. & Kundu, Patit P., 2015. "Performance assessment of partially sulfonated PVdF-co-HFP as polymer electrolyte membranes in single chambered microbial fuel cells," Applied Energy, Elsevier, vol. 137(C), pages 310-321.
    17. Wang, Hongtao & Yang, Yi & Keller, Arturo A. & Li, Xiang & Feng, Shijin & Dong, Ya-nan & Li, Fengting, 2016. "Comparative analysis of energy intensity and carbon emissions in wastewater treatment in USA, Germany, China and South Africa," Applied Energy, Elsevier, vol. 184(C), pages 873-881.
    18. Toczyłowska-Mamińska, Renata & Szymona, Karolina & Madej, Hubert & Wong, Wan Zhen & Bala, Agnieszka & Brutkowski, Wojciech & Krajewski, Krzysztof & H’ng, Paik San & Mamiński, Mariusz, 2015. "Cellulolytic and electrogenic activity of Enterobacter cloacae in mediatorless microbial fuel cell," Applied Energy, Elsevier, vol. 160(C), pages 88-93.
    19. Pasternak, Grzegorz & Greenman, John & Ieropoulos, Ioannis, 2016. "Regeneration of the power performance of cathodes affected by biofouling," Applied Energy, Elsevier, vol. 173(C), pages 431-437.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:10:y:2017:i:5:p:596-:d:97148. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.