IDEAS home Printed from https://ideas.repec.org/a/eee/transe/v86y2016icp53-68.html
   My bibliography  Save this article

Inventory control for returnable transport items in a closed-loop supply chain

Author

Listed:
  • Cobb, Barry R.

Abstract

An inventory control model for returnable transport items (RTI) where the manager selects the optimal length for inspection, repair, and purchase cycles is described. Repaired and newly obtained RTI are used in combination to satisfy current production requirements. Uncertain returns are incorporated into the model by determining a satisfactory safety stock level to buffer the inventory of used and repairable containers. The minimum cost solution is obtained when inspection and repair runs begin simultaneously. Cycle times are a function of the expected return rate and repairable percentage, while variability in these random assumptions affects the required safety stock.

Suggested Citation

  • Cobb, Barry R., 2016. "Inventory control for returnable transport items in a closed-loop supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 86(C), pages 53-68.
    • Handle: RePEc:eee:transe:v:86:y:2016:i:c:p:53-68
    DOI: 10.1016/j.tre.2015.12.010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1366554515301848
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.tre.2015.12.010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Richter, Knut, 1996. "The extended EOQ repair and waste disposal model," International Journal of Production Economics, Elsevier, vol. 45(1-3), pages 443-447, August.
    2. Tang, Ou & Grubbstrom, Robert W., 2005. "Considering stochastic lead times in a manufacturing/remanufacturing system with deterministic demands and returns," International Journal of Production Economics, Elsevier, vol. 93(1), pages 285-300, January.
    3. Accorsi, Riccardo & Cascini, Alessandro & Cholette, Susan & Manzini, Riccardo & Mora, Cristina, 2014. "Economic and environmental assessment of reusable plastic containers: A food catering supply chain case study," International Journal of Production Economics, Elsevier, vol. 152(C), pages 88-101.
    4. Mabini, Marilyn C. & Pintelon, Liliane M. & Gelders, Ludo F., 1992. "EOQ type formulations for controlling repairable inventories," International Journal of Production Economics, Elsevier, vol. 28(1), pages 21-33, November.
    5. Kim, Taebok & Glock, Christoph H. & Kwon, Yongjang, 2014. "A closed-loop supply chain for deteriorating products under stochastic container return times," Omega, Elsevier, vol. 43(C), pages 30-40.
    6. Kim, T. & Glock, C. H., 2014. "On the use of RFID in the management of reusable containers in closed-loop supply chains under stochastic container return quantities," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 63689, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    7. Kim, T. & Glock, C. H. & Kwon, Y., 2014. "A closed-loop supply chain for deteriorating products under stochastic container return times," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 62024, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    8. Richter, Knut, 1996. "The EOQ repair and waste disposal model with variable setup numbers," European Journal of Operational Research, Elsevier, vol. 95(2), pages 313-324, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yanlu Guo & Gongli Luo & Guisheng Hou, 2021. "Research on the Evolution of the Express Packaging Recycling Strategy, Considering Government Subsidies and Synergy Benefits," IJERPH, MDPI, vol. 18(3), pages 1-25, January.
    2. Meherishi, Lavanya & Narayana, Sushmita A. & Ranjani, K.S., 2021. "Integrated product and packaging decisions with secondary packaging returns and protective packaging management," European Journal of Operational Research, Elsevier, vol. 292(3), pages 930-952.
    3. Yanqi Zhang & Xiaofei Kou & Haibin Liu & Shiqing Zhang & Liangliang Qie, 2022. "IoT-Enabled Sustainable and Cost-Efficient Returnable Transport Management Strategies in Multimodal Transport Systems," Sustainability, MDPI, vol. 14(18), pages 1-22, September.
    4. Bhattacharya, Sourabh & Govindan, Kannan & Ghosh Dastidar, Surajit & Sharma, Preeti, 2024. "Applications of artificial intelligence in closed-loop supply chains: Systematic literature review and future research agenda," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 184(C).
    5. Jeong, Yoonjea & Saha, Subrata & Moon, Ilkyeong, 2020. "Optimal devanning time and detention charges for container supply chains," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 143(C).
    6. Mahmoudi, Monirehalsadat & Parviziomran, Irandokht, 2020. "Reusable packaging in supply chains: A review of environmental and economic impacts, logistics system designs, and operations management," International Journal of Production Economics, Elsevier, vol. 228(C).
    7. Liu, Wenjie & Liu, Wei & Shen, Ningning & Xu, Zhitao & Xie, Naiming & Chen, Jian & Zhou, Huiyu, 2022. "Pricing and collection decisions of a closed-loop supply chain with fuzzy demand," International Journal of Production Economics, Elsevier, vol. 245(C).
    8. Saraeian, Shideh & Shirazi, Babak & Motameni, Homayun, 2019. "Adaptive control of criticality infrastructure in automatic closed-loop supply chain considering uncertainty," International Journal of Critical Infrastructure Protection, Elsevier, vol. 25(C), pages 102-124.
    9. Barros, Júlio & Cortez, Paulo & Carvalho, M. Sameiro, 2021. "A systematic literature review about dimensioning safety stock under uncertainties and risks in the procurement process," Operations Research Perspectives, Elsevier, vol. 8(C).
    10. Mikhail Y. Kovalyov & Mikhail N. Lukashevich & Erwin Pesch, 2023. "Cost minimizing planning of container inspection and repair in multiple facilities," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 45(1), pages 181-204, March.
    11. Tanksale, Ajinkya N. & Das, Debabrata & Verma, Priyanka & Tiwari, Manoj Kumar, 2021. "Unpacking the role of primary packaging material in designing green supply chains: An integrated approach," International Journal of Production Economics, Elsevier, vol. 236(C).
    12. Chen, Zhixiang & Bidanda, Bopaya, 2019. "Sustainable manufacturing production-inventory decision of multiple factories with JIT logistics, component recovery and emission control," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 128(C), pages 356-383.
    13. Dai, Zhuo & Aqlan, Faisal & Gao, Kuo, 2017. "Optimizing multi-echelon inventory with three types of demand in supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 107(C), pages 141-177.
    14. Fatima Ezzahra Achamrah & Fouad Riane & Evren Sahin & Sabine Limbourg, 2022. "An Artificial-Immune-System-Based Algorithm Enhanced with Deep Reinforcement Learning for Solving Returnable Transport Item Problems," Sustainability, MDPI, vol. 14(10), pages 1-29, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Meherishi, Lavanya & Narayana, Sushmita A. & Ranjani, K.S., 2021. "Integrated product and packaging decisions with secondary packaging returns and protective packaging management," European Journal of Operational Research, Elsevier, vol. 292(3), pages 930-952.
    2. Zhang, Qinhong & Segerstedt, Anders & Tsao, Yu-Chung & Liu, Biyu, 2015. "Returnable packaging management in automotive parts logistics: Dedicated mode and shared mode," International Journal of Production Economics, Elsevier, vol. 168(C), pages 234-244.
    3. Mahmoudi, Monirehalsadat & Parviziomran, Irandokht, 2020. "Reusable packaging in supply chains: A review of environmental and economic impacts, logistics system designs, and operations management," International Journal of Production Economics, Elsevier, vol. 228(C).
    4. Alamri, Adel A. & Syntetos, Aris A., 2018. "Beyond LIFO and FIFO: Exploring an Allocation-In-Fraction-Out (AIFO) policy in a two-warehouse inventory model," International Journal of Production Economics, Elsevier, vol. 206(C), pages 33-45.
    5. Fleischmann, Moritz & Bloemhof-Ruwaard, Jacqueline M. & Dekker, Rommert & van der Laan, Erwin & van Nunen, Jo A. E. E. & Van Wassenhove, Luk N., 1997. "Quantitative models for reverse logistics: A review," European Journal of Operational Research, Elsevier, vol. 103(1), pages 1-17, November.
    6. Tanksale, Ajinkya N. & Das, Debabrata & Verma, Priyanka & Tiwari, Manoj Kumar, 2021. "Unpacking the role of primary packaging material in designing green supply chains: An integrated approach," International Journal of Production Economics, Elsevier, vol. 236(C).
    7. Hsieh, Chung-Chi & Lathifah, Artya, 2022. "Ordering and waste reuse decisions in a make-to-order system under demand uncertainty," European Journal of Operational Research, Elsevier, vol. 303(3), pages 1290-1303.
    8. Choi, Dae-Won & Hwang, Hark & Koh, Shie-Gheun, 2007. "A generalized ordering and recovery policy for reusable items," European Journal of Operational Research, Elsevier, vol. 182(2), pages 764-774, October.
    9. Ullah, Mehran & Sarkar, Biswajit, 2020. "Recovery-channel selection in a hybrid manufacturing-remanufacturing production model with RFID and product quality," International Journal of Production Economics, Elsevier, vol. 219(C), pages 360-374.
    10. El Saadany, Ahmed M.A. & Jaber, Mohamad Y., 2011. "A production/remanufacture model with returns' subassemblies managed differently," International Journal of Production Economics, Elsevier, vol. 133(1), pages 119-126, September.
    11. Omar, Mohd & Yeo, Ivan, 2014. "A production–repair inventory model with time-varying demand and multiple setups," International Journal of Production Economics, Elsevier, vol. 155(C), pages 398-405.
    12. Gou, Qinglong & Liang, Liang & Huang, Zhimin & Xu, Chuanyong, 2008. "A joint inventory model for an open-loop reverse supply chain," International Journal of Production Economics, Elsevier, vol. 116(1), pages 28-42, November.
    13. Jaber, Mohamad Y. & El Saadany, Ahmed M.A., 2009. "The production, remanufacture and waste disposal model with lost sales," International Journal of Production Economics, Elsevier, vol. 120(1), pages 115-124, July.
    14. Biswajit Sarkar & Mehran Ullah & Seok-Beom Choi, 2019. "Joint Inventory and Pricing Policy for an Online to Offline Closed-Loop Supply Chain Model with Random Defective Rate and Returnable Transport Items," Mathematics, MDPI, vol. 7(6), pages 1-20, June.
    15. Omar, Mohd & Yeo, Ivan, 2009. "A model for a production-repair system under a time-varying demand process," International Journal of Production Economics, Elsevier, vol. 119(1), pages 17-23, May.
    16. Yanqi Zhang & Xiaofei Kou & Haibin Liu & Shiqing Zhang & Liangliang Qie, 2022. "IoT-Enabled Sustainable and Cost-Efficient Returnable Transport Management Strategies in Multimodal Transport Systems," Sustainability, MDPI, vol. 14(18), pages 1-22, September.
    17. Kuzmicz, Katarzyna Anna & Pesch, Erwin, 2019. "Approaches to empty container repositioning problems in the context of Eurasian intermodal transportation," Omega, Elsevier, vol. 85(C), pages 194-213.
    18. El Saadany, Ahmed M.A. & Jaber, Mohamad Y. & Bonney, Maurice, 2013. "How many times to remanufacture?," International Journal of Production Economics, Elsevier, vol. 143(2), pages 598-604.
    19. Bimal Kumar Mawandiya & J. K. Jha & Jitesh J. Thakkar, 2020. "Optimal production-inventory policy for closed-loop supply chain with remanufacturing under random demand and return," Operational Research, Springer, vol. 20(3), pages 1623-1664, September.
    20. Mostafa Parsa & Ali Shahandeh Nookabadi & Zümbül Atan & Yaser Malekian, 2022. "An optimal inventory policy for a multi-echelon closed-loop supply chain of postconsumer recycled content products," Operational Research, Springer, vol. 22(3), pages 1887-1938, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:transe:v:86:y:2016:i:c:p:53-68. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600244/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.