IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v90y2018icp248-274.html
   My bibliography  Save this article

Photovoltaic performances of mono- and mixed-halide structures for perovskite solar cell: A review

Author

Listed:
  • Ng, C.H.
  • Lim, H.N.
  • Hayase, S.
  • Zainal, Z.
  • Huang, N.M.

Abstract

This review discusses the photovoltaic performances of mono- and mixed-halide perovskite solar cells, which include the band gap, absorption spectrum, hysteretic behavior, impedance spectroscopy results, and current-voltage measurements. It is desirable to obtain a high-performance perovskite material for use as a light harvester with excellent photovoltaic performances, including a high open circuit voltage (Voc), high short circuit current density (Jsc), high efficiency with minor recombination rate, and large optical absorption ability. In addition, this perovskite material should be able to harvest light over the entire absorption spectrum. Typically, the near-IR region is highly favorable for obtaining the highest power conversion efficiency (PCE) for a solar cell. However, to date, the optical absorption ability of a lead-based single halide perovskite solar cell is still constrained below the near-IR region, which hinders its performance as a fully efficient perovskite solar cell. The insertion of tin within the methylammonium lead halide matrix, which forms CH3NH3SnxPb(1-x)I3, provided excellent light absorption with photo-response coverage up to 1060 nm. Nevertheless, the low efficiency and low Voc of the tin halide-based perovskite solar cell ascribed to the instability of the Sn (II) ion hinders the current solar cell application despite its good light-harvesting performance. Another approach to enhance the photovoltaic performance involves tailoring mixed halides for a perovskite solar cell. A wider absorption spectrum range is obtainable, and the band gap energy of the perovskite solar cell is tunable by adjusting the ratio of the mixed halides. The perovskite solar cells have high potential to be the largest energy production in the near future owing to their low module cost with high conversion efficiency, comparable to the silicon solar cell.

Suggested Citation

  • Ng, C.H. & Lim, H.N. & Hayase, S. & Zainal, Z. & Huang, N.M., 2018. "Photovoltaic performances of mono- and mixed-halide structures for perovskite solar cell: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 248-274.
    • Handle: RePEc:eee:rensus:v:90:y:2018:i:c:p:248-274
    DOI: 10.1016/j.rser.2018.03.030
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032118301102
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2018.03.030?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hashmi, Ghufran & Miettunen, Kati & Peltola, Timo & Halme, Janne & Asghar, Imran & Aitola, Kerttu & Toivola, Minna & Lund, Peter, 2011. "Review of materials and manufacturing options for large area flexible dye solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3717-3732.
    2. Mingzhen Liu & Michael B. Johnston & Henry J. Snaith, 2013. "Efficient planar heterojunction perovskite solar cells by vapour deposition," Nature, Nature, vol. 501(7467), pages 395-398, September.
    3. Naveen Kumar Elumalai & Md Arafat Mahmud & Dian Wang & Ashraf Uddin, 2016. "Perovskite Solar Cells: Progress and Advancements," Energies, MDPI, vol. 9(11), pages 1-20, October.
    4. Ibn-Mohammed, T. & Koh, S.C.L. & Reaney, I.M. & Acquaye, A. & Schileo, G. & Mustapha, K.B. & Greenough, R., 2017. "Perovskite solar cells: An integrated hybrid lifecycle assessment and review in comparison with other photovoltaic technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 1321-1344.
    5. Martin A. Green, 2016. "Commercial progress and challenges for photovoltaics," Nature Energy, Nature, vol. 1(1), pages 1-4, January.
    6. Kunta Yoshikawa & Hayato Kawasaki & Wataru Yoshida & Toru Irie & Katsunori Konishi & Kunihiro Nakano & Toshihiko Uto & Daisuke Adachi & Masanori Kanematsu & Hisashi Uzu & Kenji Yamamoto, 2017. "Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%," Nature Energy, Nature, vol. 2(5), pages 1-8, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yiqing Dai & Yu Bai, 2020. "Performance Improvement for Building Integrated Photovoltaics in Practice: A Review," Energies, MDPI, vol. 14(1), pages 1-22, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Issa M. Aziz, 2023. "Synthesizing and characterization of Lead Halide Perovskite Nanocrystals solar cells from reused car batteries," Technium, Technium Science, vol. 10(1), pages 14-26.
    2. Giovanni Landi & Sergio Pagano & Heinz Christoph Neitzert & Costantino Mauro & Carlo Barone, 2023. "Noise Spectroscopy: A Tool to Understand the Physics of Solar Cells," Energies, MDPI, vol. 16(3), pages 1-37, January.
    3. Mesquita, Isabel & Andrade, Luísa & Mendes, Adélio, 2018. "Perovskite solar cells: Materials, configurations and stability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2471-2489.
    4. Litvin, Aleksandr P. & Zhang, Xiaoyu & Berwick, Kevin & Fedorov, Anatoly V. & Zheng, Weitao & Baranov, Alexander V., 2020. "Carbon-based interlayers in perovskite solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 124(C).
    5. Yingxiao Fan & Yu Wu & Yang Xu & Wenhui Li & Huawei Zhou & Xianxi Zhang, 2022. "Situation and Perspectives on Tin-Based Perovskite Solar Cells," Sustainability, MDPI, vol. 14(24), pages 1-11, December.
    6. Sreeram Valsalakumar & Anurag Roy & Tapas K. Mallick & Justin Hinshelwood & Senthilarasu Sundaram, 2022. "An Overview of Current Printing Technologies for Large-Scale Perovskite Solar Cell Development," Energies, MDPI, vol. 16(1), pages 1-29, December.
    7. Lutao Li & Junjie Yao & Juntong Zhu & Yuan Chen & Chen Wang & Zhicheng Zhou & Guoxiang Zhao & Sihan Zhang & Ruonan Wang & Jiating Li & Xiangyi Wang & Zheng Lu & Lingbo Xiao & Qiang Zhang & Guifu Zou, 2023. "Colloid driven low supersaturation crystallization for atomically thin Bismuth halide perovskite," Nature Communications, Nature, vol. 14(1), pages 1-8, December.
    8. Jae Yun Jeong & Inje Kang & Ki Seok Choi & Byeong-Hee Lee, 2018. "Network Analysis on Green Technology in National Research and Development Projects in Korea," Sustainability, MDPI, vol. 10(4), pages 1-12, April.
    9. Zardetto, V. & Mincuzzi, G. & De Rossi, F. & Di Giacomo, F. & Reale, A. & Di Carlo, A. & Brown, T.M., 2014. "Outdoor and diurnal performance of large conformal flexible metal/plastic dye solar cells," Applied Energy, Elsevier, vol. 113(C), pages 1155-1161.
    10. Ming-Hsien Li & Jun-Ho Yum & Soo-Jin Moon & Peter Chen, 2016. "Inorganic p-Type Semiconductors: Their Applications and Progress in Dye-Sensitized Solar Cells and Perovskite Solar Cells," Energies, MDPI, vol. 9(5), pages 1-28, April.
    11. Salhi, B. & Wudil, Y.S. & Hossain, M.K. & Al-Ahmed, A. & Al-Sulaiman, F.A., 2018. "Review of recent developments and persistent challenges in stability of perovskite solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 210-222.
    12. Wang, Yunjie & Yang, Huihan & Chen, Haifei & Yu, Bendong & Zhang, Haohua & Zou, Rui & Ren, Shaoyang, 2023. "A review: The development of crucial solar systems and corresponding cooling technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    13. Mehmood, Haris & Nasser, Hisham & Zaidi, Syed Muhammad Hassan & Tauqeer, Tauseef & Turan, Raşit, 2022. "Physical device simulation of dopant-free asymmetric silicon heterojunction solar cell featuring tungsten oxide as a hole-selective layer with ultrathin silicon oxide passivation layer," Renewable Energy, Elsevier, vol. 183(C), pages 188-201.
    14. M. M. Hasan & Shakhawat Hossain & M. Mofijur & Zobaidul Kabir & Irfan Anjum Badruddin & T. M. Yunus Khan & Esam Jassim, 2023. "Harnessing Solar Power: A Review of Photovoltaic Innovations, Solar Thermal Systems, and the Dawn of Energy Storage Solutions," Energies, MDPI, vol. 16(18), pages 1-30, September.
    15. Yanan Shi & Yilin Chang & Kun Lu & Zhihao Chen & Jianqi Zhang & Yangjun Yan & Dingding Qiu & Yanan Liu & Muhammad Abdullah Adil & Wei Ma & Xiaotao Hao & Lingyun Zhu & Zhixiang Wei, 2022. "Small reorganization energy acceptors enable low energy losses in non-fullerene organic solar cells," Nature Communications, Nature, vol. 13(1), pages 1-10, December.
    16. Ubani, C.A. & Ibrahim, M.A. & Teridi, M.A.M., 2017. "Moving into the domain of perovskite sensitized solar cell," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 907-915.
    17. La Notte, Luca & Giordano, Lorena & Calabrò, Emanuele & Bedini, Roberto & Colla, Giuseppe & Puglisi, Giovanni & Reale, Andrea, 2020. "Hybrid and organic photovoltaics for greenhouse applications," Applied Energy, Elsevier, vol. 278(C).
    18. Changhyun Lee & Soohyun Bae & HyunJung Park & Dongjin Choi & Hoyoung Song & Hyunju Lee & Yoshio Ohshita & Donghwan Kim & Yoonmook Kang & Hae-Seok Lee, 2020. "Properties of Thermally Evaporated Titanium Dioxide as an Electron-Selective Contact for Silicon Solar Cells," Energies, MDPI, vol. 13(3), pages 1-10, February.
    19. Simone M. P. Meroni & Carys Worsley & Dimitrios Raptis & Trystan M. Watson, 2021. "Triple-Mesoscopic Carbon Perovskite Solar Cells: Materials, Processing and Applications," Energies, MDPI, vol. 14(2), pages 1-37, January.
    20. Liu, Jiaping & Qi, Yu & Ke, Juyang & Zhao, Yicong & Li, Xiaoqing & Yu, Yang & Sun, Xuyang & Guo, Rui, 2024. "Mechanically programmable substrate enable highly stretchable solar cell arrays for self-powered electronic skin," Applied Energy, Elsevier, vol. 367(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:90:y:2018:i:c:p:248-274. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.