IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v197y2024ics1364032124001072.html
   My bibliography  Save this article

Correlations of falling film hydrodynamics and heat transfer on horizontal tubes: A review

Author

Listed:
  • Zhao, Chuang-Yao
  • Zheng, Chen-Min
  • Wang, Xiao-Song
  • Qi, Di
  • Jiang, Jun-Min
  • Ji, Wen-Tao
  • Jin, Pu-Hang
  • Tao, Wen-Quan

Abstract

Falling film flow and heat transfer are extensively encountered in various industries of renewable and sustainable energy due to the outstanding heat transfer performance. The predictions in falling film hydrodynamics and heat transfer are crucial for the optimal design of falling film heat exchangers, and there have been considerable advancements made in this area over the past few decades. Considering the gaps in current literature predictions, this paper aims to present a comprehensive review on the correlations of flow pattern transition, film thickness, heat transfer, and liquid film rupture within falling film flowing over horizontal tubes and tube bundles. Through comparisons and summarizations, it can be found that the documented correlations appear to be significantly out of alignment with one another, which greatly restricts the applicability of these predictions. The correlations of falling film thickness that are obtained using regression approach based on dimensional analysis may take into account more factors than the ones modified from Nusselt theory. The predictions of flow pattern transition of falling liquid film with horizontal column are often described as the functions of the film Reynolds number, derived from the Kapitza number or the Galileo number. The functions of Nusselt number, film Reynolds number, Prandtl number, and Archimedes number are typically used to represent sensible and evaporative heat transfer correlations, whereas boiling heat transfer correlations also take into account the influence of heat flux, such as Boiling number. The full process of actual heat transfer is taken into account from both the standpoints of sensible convection and nucleate boiling using the combination functions of various heat transfer forms. Within the ranges of their own parameters, the well-established heat transfer models often offer good accuracy. While the predictions of phase change heat transfer often behave worse, the predictions of sensible heat transfer are more general and accurate. Generally speaking, the minimum film flow rate or the maximum heat flux were the functions that correlated with the inceptions of liquid film rupture.

Suggested Citation

  • Zhao, Chuang-Yao & Zheng, Chen-Min & Wang, Xiao-Song & Qi, Di & Jiang, Jun-Min & Ji, Wen-Tao & Jin, Pu-Hang & Tao, Wen-Quan, 2024. "Correlations of falling film hydrodynamics and heat transfer on horizontal tubes: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 197(C).
  • Handle: RePEc:eee:rensus:v:197:y:2024:i:c:s1364032124001072
    DOI: 10.1016/j.rser.2024.114384
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032124001072
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.rser.2024.114384?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wen, Tao & Lu, Lin, 2019. "A review of correlations and enhancement approaches for heat and mass transfer in liquid desiccant dehumidification system," Applied Energy, Elsevier, vol. 239(C), pages 757-784.
    2. Wang, Lu & Guo, Leihong & Ren, Jianlin & Kong, Xiangfei, 2022. "Using of heat thermal storage of PCM and solar energy for distributed clean building heating: A multi-level scale-up research," Applied Energy, Elsevier, vol. 321(C).
    3. Lei Wu & Zhichao Dong & Zheren Cai & Turga Ganapathy & Niocholas X. Fang & Chuxin Li & Cunlong Yu & Yu Zhang & Yanlin Song, 2020. "Highly efficient three-dimensional solar evaporator for high salinity desalination by localized crystallization," Nature Communications, Nature, vol. 11(1), pages 1-12, December.
    4. Yuan, Xiao & Du, Yanping & Su, Jing, 2022. "Approaches and potentials for pool boiling enhancement with superhigh heat flux on responsive smart surfaces: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    5. Elsarrag, Esam & Igobo, Opubo N. & Alhorr, Yousef & Davies, Philip A., 2016. "Solar pond powered liquid desiccant evaporative cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 124-140.
    6. Chen, Jingdong & Zhang, Ruihang & Niu, Runping, 2015. "Numerical simulation of horizontal tube bundle falling film flow pattern transformation," Renewable Energy, Elsevier, vol. 73(C), pages 62-68.
    7. Wen, Tao & Lu, Lin & He, Weifeng & Min, Yunran, 2020. "Fundamentals and applications of CFD technology on analyzing falling film heat and mass exchangers: A comprehensive review," Applied Energy, Elsevier, vol. 261(C).
    8. Sehgal, Shitiz & Alvarado, Jorge L. & Hassan, Ibrahim G. & Kadam, Sambhaji T., 2021. "A comprehensive review of recent developments in falling-film, spray, bubble and microchannel absorbers for absorption systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 142(C).
    9. Limiao Zhang & Chi Wang & Guanyu Su & Artyom Kossolapov & Gustavo Matana Aguiar & Jee Hyun Seong & Florian Chavagnat & Bren Phillips & Md Mahamudur Rahman & Matteo Bucci, 2023. "A unifying criterion of the boiling crisis," Nature Communications, Nature, vol. 14(1), pages 1-16, December.
    10. Omara, Z.M. & Abdullah, A.S. & Kabeel, A.E. & Essa, F.A., 2017. "The cooling techniques of the solar stills' glass covers – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 176-193.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sui, Zengguang & Zhai, Chong & Wu, Wei, 2022. "Parametric and comparative study on enhanced microchannel membrane-based absorber structures for compact absorption refrigeration," Renewable Energy, Elsevier, vol. 187(C), pages 109-122.
    2. Sui, Zengguang & Wu, Wei, 2022. "A comprehensive review of membrane-based absorbers/desorbers towards compact and efficient absorption refrigeration systems," Renewable Energy, Elsevier, vol. 201(P1), pages 563-593.
    3. Sui, Zengguang & Sui, Yunren & Wu, Wei, 2022. "Multi-objective optimization of a microchannel membrane-based absorber with inclined grooves based on CFD and machine learning," Energy, Elsevier, vol. 240(C).
    4. Jianlin Ren & Shasha Duan & Leihong Guo & Hongwan Li & Xiangfei Kong, 2022. "Effects of Return Air Inlets’ Location on the Control of Fine Particle Transportation in a Simulated Hospital Ward," IJERPH, MDPI, vol. 19(18), pages 1-21, September.
    5. Chen, W.D. & Vivekh, P. & Liu, M.Z. & Kumja, M. & Chua, K.J., 2021. "Energy improvement and performance prediction of desiccant coated dehumidifiers based on dimensional and scaling analysis," Applied Energy, Elsevier, vol. 303(C).
    6. Fekadu, Geleta & Subudhi, Sudhakar, 2018. "Renewable energy for liquid desiccants air conditioning system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 93(C), pages 364-379.
    7. Liang, Chenjiyu & Li, Xianting & Zheng, Gonghang, 2022. "Optimizing air conditioning systems by considering the grades of sensible and latent heat loads," Applied Energy, Elsevier, vol. 322(C).
    8. Shenxiang Zhang & Xian Wei & Xue Cao & Meiwen Peng & Min Wang & Lin Jiang & Jian Jin, 2024. "Solar-driven membrane separation for direct lithium extraction from artificial salt-lake brine," Nature Communications, Nature, vol. 15(1), pages 1-9, December.
    9. Kong, Xiangfei & Du, Xinyu & Xue, Guixiang & Xu, Zhijie, 2023. "Multi-step short-term solar radiation prediction based on empirical mode decomposition and gated recurrent unit optimized via an attention mechanism," Energy, Elsevier, vol. 282(C).
    10. Fan, Man & Hu, Ming & Suo, Hanxiao & Kong, Xiangfei & Li, Han & Jia, Jie, 2024. "Preferred method and performance evaluation of heterogeneous composite phase change material (CPCM) wallboard in different seasons," Renewable Energy, Elsevier, vol. 220(C).
    11. Jaroslaw Krzywanski, 2019. "A General Approach in Optimization of Heat Exchangers by Bio-Inspired Artificial Intelligence Methods," Energies, MDPI, vol. 12(23), pages 1-32, November.
    12. Ahmad Baroutaji & Arun Arjunan & John Robinson & Tabbi Wilberforce & Mohammad Ali Abdelkareem & Abdul Ghani Olabi, 2021. "PEMFC Poly-Generation Systems: Developments, Merits, and Challenges," Sustainability, MDPI, vol. 13(21), pages 1-31, October.
    13. Shatar, Nursyahirah Mohd & Sabri, Mohd Faizul Mohd & Salleh, Mohd Faiz Mohd & Ani, Mohd Hanafi, 2023. "Investigation on the performance of solar still with thermoelectric cooling system for various cover material," Renewable Energy, Elsevier, vol. 202(C), pages 844-854.
    14. Wu, Yangyang & Yao, Wenfei & Meng, Fanbin & Wang, Di & Zhao, Xuefeng & Meng, Lan & Arıcı, Müslüm & Li, Dong, 2024. "Energy performance analysis of solar assisted gas-fired boiler heating system for floating roof oil tank," Renewable Energy, Elsevier, vol. 225(C).
    15. Giampieri, A. & Ma, Z. & Ling-Chin, J. & Roskilly, A.P. & Smallbone, A.J., 2022. "An overview of solutions for airborne viral transmission reduction related to HVAC systems including liquid desiccant air-scrubbing," Energy, Elsevier, vol. 244(PA).
    16. Sohani, Ali & Cornaro, Cristina & Shahverdian, Mohammad Hassan & Moser, David & Pierro, Marco & Olabi, Abdul Ghani & Karimi, Nader & Nižetić, Sandro & Li, Larry K.B. & Doranehgard, Mohammad Hossein, 2023. "Techno-economic evaluation of a hybrid photovoltaic system with hot/cold water storage for poly-generation in a residential building," Applied Energy, Elsevier, vol. 331(C).
    17. Zhang, Sheng & Liu, Jun & Zhang, Xia & Wang, Fenghao, 2024. "Properly shortening design time scale of medium-deep borehole heat exchanger for high building heating performances with high computational efficiency," Energy, Elsevier, vol. 290(C).
    18. Qin, Siyu & Ji, Ruiyang & Miao, Chengyu & Jin, Liwen & Yang, Chun & Meng, Xiangzhao, 2024. "Review of enhancing boiling and condensation heat transfer: Surface modification," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PA).
    19. Yang, Zili & Tao, Ruiyang & Chen, Lu-An & Zhong, Ke & Chen, Bin, 2020. "Feasibility study on improving the performance of atomization liquid desiccant dehumidifier with standing-wave ultrasound," Energy, Elsevier, vol. 205(C).
    20. Giampieri, Alessandro & Ma, Zhiwei & Ling-Chin, Janie & Bao, Huashan & Smallbone, Andrew J. & Roskilly, Anthony Paul, 2022. "Liquid desiccant dehumidification and regeneration process: Advancing correlations for moisture and enthalpy effectiveness," Applied Energy, Elsevier, vol. 314(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:197:y:2024:i:c:s1364032124001072. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.