IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v236y2024ics0960148124015088.html
   My bibliography  Save this article

Comparative study of grass pyrolysis over regenerated catalysts: Tyre ash, zeolite, and nickel-supported ash and zeolite

Author

Listed:
  • Jerzak, Wojciech
  • Sieradzka, Małgorzata
  • Wądrzyk, Mariusz
  • Magdziarz, Aneta

Abstract

This paper presents investigations on catalytic and non-catalytic grass pyrolysis conducted at 500 °C using two reactor scales: a micro-scale reactor and a laboratory fixed-bed reactor. Four catalysts were employed in the catalytic pyrolysis process: car tyre ash, commercial zeolite mordenite-sodium, nickel supported on ash, and nickel supported on zeolite. The use of catalysts reduced the production of oxygenates and promoted the formation of gaseous compounds, with the most pronounced effect observed for nickel supported on zeolite. Catalytic pyrolysis produced chars with yields that were higher than those of the non-catalytic process. The coking behaviour of the spent catalysts was evaluated by analysing carbon content, with the highest content (3 wt% C) obtained for ash after the first cycle. In the second cycle, the deposited carbon content decreased for all catalysts. Furthermore, the employment of catalysts was shown to promote the production of hydrogen, methane, and other hydrocarbons in pyrolysis gas. The higher heating value of the pyrolysis gas was the highest at 21.1 MJ/m³ when the ash catalyst was first used for pyrolysis. Reusing the pyrolysis catalysts slightly reduced the heating value of the gas to 20.3 MJ/m³ over ash and 20.6 MJ/m³ over zeolite.

Suggested Citation

  • Jerzak, Wojciech & Sieradzka, Małgorzata & Wądrzyk, Mariusz & Magdziarz, Aneta, 2024. "Comparative study of grass pyrolysis over regenerated catalysts: Tyre ash, zeolite, and nickel-supported ash and zeolite," Renewable Energy, Elsevier, vol. 236(C).
  • Handle: RePEc:eee:renene:v:236:y:2024:i:c:s0960148124015088
    DOI: 10.1016/j.renene.2024.121440
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148124015088
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2024.121440?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:236:y:2024:i:c:s0960148124015088. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.