IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v172y2021icp382-391.html
   My bibliography  Save this article

Numerical analysis of the performance improvement of a flat-plate solar collector using conjugated porous blocks

Author

Listed:
  • Anirudh, K.
  • Dhinakaran, S.

Abstract

Performance enhancement of a flat-plate solar collector (FPSC) of direct absorption has been studied using porous insertions. The FPSC channel includes three conjugated porous blocks with various levels of permeability near the bottom insulator wall. Both the length and width of the blocks are altered near the inlet and outlet sections. The size of the middle trapezoidal block is aligned with reference to the gap available between the blocks near inlet and outlet. The parametric study focuses on finding the optimum design and arrangement of porous insertion. The height and width of the inlet sections are varied between 0 - H (step of 0.2) and 0-L (step of 0.2), respectively. The permeability of the porous blocks is varied between Da = 10−3 - 10−1. The opensource tool OpenFOAM® is used, and a generic steady-state thermal transport code is modified by the extended Darcy-Brinkman-Forchheimer model for realising porous medium. Numerical results indicate that the overall performance of the flat plate collector channel is improved by using the conjugated arrangement of porous bodies. The approach of placing the bodies near the bottom insulator plate improves heat transfer by promoting thermal mixing. Also, it is seen that more flow deviates towards the top absorber plate, and hence better thermal contact is established with the working fluid. The optimum performance is noticed for lower values of height of the block near the inlet and higher values near the outlet.

Suggested Citation

  • Anirudh, K. & Dhinakaran, S., 2021. "Numerical analysis of the performance improvement of a flat-plate solar collector using conjugated porous blocks," Renewable Energy, Elsevier, vol. 172(C), pages 382-391.
    • Handle: RePEc:eee:renene:v:172:y:2021:i:c:p:382-391
    DOI: 10.1016/j.renene.2021.02.145
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121003244
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.02.145?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Anirudh, K. & Dhinakaran, S., 2020. "Performance improvement of a flat-plate solar collector by inserting intermittent porous blocks," Renewable Energy, Elsevier, vol. 145(C), pages 428-441.
    2. Al-Nimr, M.A. & Alkam, M.K., 1998. "A modified tubeless solar collector partially filled with porous substrate," Renewable Energy, Elsevier, vol. 13(2), pages 165-173.
    3. Anirudh, K. & Dhinakaran, S., 2020. "Numerical study on performance improvement of a flat-plate solar collector filled with porous foam," Renewable Energy, Elsevier, vol. 147(P1), pages 1704-1717.
    4. Jouybari, Nima Fallah & Lundström, T. Staffan, 2020. "Performance improvement of a solar air heater by covering the absorber plate with a thin porous material," Energy, Elsevier, vol. 190(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sudhir Kumar Pathak & Tagamud Tazmeen & K. Chopra & V. V. Tyagi & Sanjeev Anand & Ammar M. Abdulateef & A. K. Pandey, 2023. "Sustainable Energy Progress via Integration of Thermal Energy Storage and Other Performance Enhancement Strategies in FPCs: A Synergistic Review," Sustainability, MDPI, vol. 15(18), pages 1-37, September.
    2. Setareh, Milad, 2021. "Comprehensive mathematical study on solar chimney powerplant," Renewable Energy, Elsevier, vol. 175(C), pages 470-485.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tabish Alam & Nagesh Babu Balam & Kishor Sitaram Kulkarni & Md Irfanul Haque Siddiqui & Nishant Raj Kapoor & Chandan Swaroop Meena & Ashok Kumar & Raffaello Cozzolino, 2021. "Performance Augmentation of the Flat Plate Solar Thermal Collector: A Review," Energies, MDPI, vol. 14(19), pages 1-23, September.
    2. Rawal Diganjit & Nagaranjan Gnanasekaran & Moghtada Mobedi, 2023. "Thermohydraulic Efficiency of a Solar Air Heater in the Presence of Graded Aluminium Wire Mesh—A Combined Experimental–Numerical Study," Energies, MDPI, vol. 16(15), pages 1-32, July.
    3. Anirudh, K. & Dhinakaran, S., 2020. "Numerical study on performance improvement of a flat-plate solar collector filled with porous foam," Renewable Energy, Elsevier, vol. 147(P1), pages 1704-1717.
    4. Khanlari, Ataollah & Tuncer, Azim Doğuş & Sözen, Adnan & Aytaç, İpek & Çiftçi, Erdem & Variyenli, Halil İbrahim, 2022. "Energy and exergy analysis of a vertical solar air heater with nano-enhanced absorber coating and perforated baffles," Renewable Energy, Elsevier, vol. 187(C), pages 586-602.
    5. Kalogirou, Soteris A., 2012. "A detailed thermal model of a parabolic trough collector receiver," Energy, Elsevier, vol. 48(1), pages 298-306.
    6. Hajabdollahi, Hassan, 2021. "Thermoeconomic assessment of integrated solar flat plat collector with cross flow heat exchanger as solar air heater using numerical analysis," Renewable Energy, Elsevier, vol. 168(C), pages 491-504.
    7. Natalia Rydalina & Elena Antonova & Irina Akhmetova & Svetlana Ilyashenko & Olga Afanaseva & Vincenzo Bianco & Alexander Fedyukhin, 2020. "Analysis of the Efficiency of Using Heat Exchangers with Porous Inserts in Heat and Gas Supply Systems," Energies, MDPI, vol. 13(22), pages 1-13, November.
    8. Sheikholeslami, M. & Farshad, Seyyed Ali & Shafee, Ahmad & Babazadeh, Houman, 2021. "Performance of solar collector with turbulator involving nanomaterial turbulent regime," Renewable Energy, Elsevier, vol. 163(C), pages 1222-1237.
    9. Ravi Kumar, K. & Reddy, K.S., 2009. "Thermal analysis of solar parabolic trough with porous disc receiver," Applied Energy, Elsevier, vol. 86(9), pages 1804-1812, September.
    10. Kumar, Amit & Singh, Ajeet Pratap & Akshayveer, & Singh, O.P., 2022. "Performance characteristics of a new curved double-pass counter flow solar air heater," Energy, Elsevier, vol. 239(PA).
    11. Rawal Diganjit & N. Gnanasekaran & Moghtada Mobedi, 2022. "Numerical Study for Enhancement of Heat Transfer Using Discrete Metal Foam with Varying Thickness and Porosity in Solar Air Heater by LTNE Method," Energies, MDPI, vol. 15(23), pages 1-28, November.
    12. Gao, Datong & Zhong, Shuai & Ren, Xiao & Kwan, Trevor Hocksun & Pei, Gang, 2022. "The energetic, exergetic, and mechanical comparison of two structurally optimized non-concentrating solar collectors for intermediate temperature applications," Renewable Energy, Elsevier, vol. 184(C), pages 881-898.
    13. Rashidi, Saman & Esfahani, Javad Abolfazli & Rashidi, Abbas, 2017. "A review on the applications of porous materials in solar energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1198-1210.
    14. Sharma, Harish Kumar & Kumar, Satish & Verma, Sujit Kumar, 2022. "Comparative performance analysis of flat plate solar collector having circular &trapezoidal corrugated absorber plate designs," Energy, Elsevier, vol. 253(C).
    15. Wang, P. & Liu, D.Y. & Xu, C., 2013. "Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams," Applied Energy, Elsevier, vol. 102(C), pages 449-460.
    16. Xinwei Lin & Yongfang Xia & Zude Cheng & Xianshuang Liu & Yingmei Fu & Lingyun Li & Wenqin Zhou, 2024. "Thermal Performance Analysis of Porous Foam-Assisted Flat-Plate Solar Collectors with Nanofluids," Sustainability, MDPI, vol. 16(2), pages 1-26, January.
    17. Jihu Lee & Sung-Hun Son & Kibum Kim, 2021. "Eco-Friendly and Economical Solar Heater Design Using Internal Structure and Phase Change Materials," Energies, MDPI, vol. 14(21), pages 1-15, November.
    18. Liu, Yan & Tan, Chenchen & Jin, Yingai & Ma, Shihong, 2022. "Heat collection performance analysis of corrugated flat plate collector: An experimental study," Renewable Energy, Elsevier, vol. 181(C), pages 1-9.
    19. Meng Liu & Shenghua Du & Qing Ai & Jiaming Gong & Yong Shuai, 2022. "Spectral Radiation Characteristic Measurements of Absorption and Scattering Semitransparent Materials—A Review," Energies, MDPI, vol. 15(23), pages 1-28, November.
    20. Chen, Tianyu & Shu, Gequn & Tian, Hua & Zhao, Tingting & Zhang, Hongfei & Zhang, Zhao, 2020. "Performance evaluation of metal-foam baffle exhaust heat exchanger for waste heat recovery," Applied Energy, Elsevier, vol. 266(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:172:y:2021:i:c:p:382-391. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.