IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v145y2020icp428-441.html
   My bibliography  Save this article

Performance improvement of a flat-plate solar collector by inserting intermittent porous blocks

Author

Listed:
  • Anirudh, K.
  • Dhinakaran, S.

Abstract

Numerical analysis of the thermal performance of a flat plate solar collector (FPSC) is presented. The FPSC is inserted with porous metal foam blocks intermittently for promoting thermal mixing. Based on the presence of blocks at the inlet and the outlet, four different arrangements are used namely NN, NP, PN and PP, wherein N means absent, and P means present. Also, four different cases based on the increasing number of porous blocks as per respective arrangement are considered viz., Case 1 with 1 or 2, Case 2 with 3 or 4, Case 3 with 5 or 6, and Case 4 with 7 or 8 porous blocks. Influence of height of porous blocks (S = 0–1), and permeability of the porous medium (Darcy number, Da = 10−4 - 10−1) on the collector outlet temperature, i.e. overall heating of the working fluid (Prandtl number, Pr = 7), has been studied. Numerical experiments are performed by modifying a generic code (SimpleFOAM) from the OpenFOAM® repository with the extended Darcy-Brinkman-Forchheimer model for realising porous medium. Results indicate that significant augmentation in heat transfer can be achieved by increasing the number of blocks due to improved thermal mixing. The increment was prominent for higher values of the height of porous blocks. However, the pressure drop penalty has to be spent in such cases. The performance of the FPSC channel improves when the number of porous blocks is minimal, along with lesser height. The value is higher even than the case of a channel filled with a continuous porous layer of varying thickness. Overall, a better performance evaluation criteria value is reported for the insertion of the porous block in comparison to both, empty and filled porous FPSC channel. Detailed insights are further provided on the inclusion of the Forchheimer term while modelling the porous medium. For lower values of permeability, wherein the porous resistances are higher in amplitude, the results vary significantly for Darcy-Brinkman model in comparison to Extended Darcy-Brinkman-Forchheimer model. The manuscript provides an impetus for further experimental work on the present case, and assists to explore the performance improvement in an FPSC channel by insertion of the porous medium.

Suggested Citation

  • Anirudh, K. & Dhinakaran, S., 2020. "Performance improvement of a flat-plate solar collector by inserting intermittent porous blocks," Renewable Energy, Elsevier, vol. 145(C), pages 428-441.
    • Handle: RePEc:eee:renene:v:145:y:2020:i:c:p:428-441
    DOI: 10.1016/j.renene.2019.06.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119308286
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2019.06.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rawal Diganjit & N. Gnanasekaran & Moghtada Mobedi, 2022. "Numerical Study for Enhancement of Heat Transfer Using Discrete Metal Foam with Varying Thickness and Porosity in Solar Air Heater by LTNE Method," Energies, MDPI, vol. 15(23), pages 1-28, November.
    2. Chen, Tianyu & Shu, Gequn & Tian, Hua & Zhao, Tingting & Zhang, Hongfei & Zhang, Zhao, 2020. "Performance evaluation of metal-foam baffle exhaust heat exchanger for waste heat recovery," Applied Energy, Elsevier, vol. 266(C).
    3. Anirudh, K. & Dhinakaran, S., 2020. "Numerical study on performance improvement of a flat-plate solar collector filled with porous foam," Renewable Energy, Elsevier, vol. 147(P1), pages 1704-1717.
    4. Natalia Rydalina & Elena Antonova & Irina Akhmetova & Svetlana Ilyashenko & Olga Afanaseva & Vincenzo Bianco & Alexander Fedyukhin, 2020. "Analysis of the Efficiency of Using Heat Exchangers with Porous Inserts in Heat and Gas Supply Systems," Energies, MDPI, vol. 13(22), pages 1-13, November.
    5. Rawal Diganjit & Nagaranjan Gnanasekaran & Moghtada Mobedi, 2023. "Thermohydraulic Efficiency of a Solar Air Heater in the Presence of Graded Aluminium Wire Mesh—A Combined Experimental–Numerical Study," Energies, MDPI, vol. 16(15), pages 1-32, July.
    6. Jouybari, Nima Fallah & Lundström, T. Staffan, 2020. "Performance improvement of a solar air heater by covering the absorber plate with a thin porous material," Energy, Elsevier, vol. 190(C).
    7. Liu, Yan & Tan, Chenchen & Jin, Yingai & Ma, Shihong, 2022. "Heat collection performance analysis of corrugated flat plate collector: An experimental study," Renewable Energy, Elsevier, vol. 181(C), pages 1-9.
    8. Sharma, Harish Kumar & Kumar, Satish & Verma, Sujit Kumar, 2022. "Comparative performance analysis of flat plate solar collector having circular &trapezoidal corrugated absorber plate designs," Energy, Elsevier, vol. 253(C).
    9. Sheikholeslami, M. & Farshad, Seyyed Ali & Shafee, Ahmad & Babazadeh, Houman, 2021. "Performance of solar collector with turbulator involving nanomaterial turbulent regime," Renewable Energy, Elsevier, vol. 163(C), pages 1222-1237.
    10. Xingwang Tang & Chenchen Tan & Yan Liu & Chuanyu Sun & Sichuan Xu, 2024. "Numerical Analysis on Heat Collecting Performance of Novel Corrugated Flat Plate Solar Collector Using Nanofluids," Sustainability, MDPI, vol. 16(14), pages 1-19, July.
    11. Fan, Yi & Zhao, Xudong & Han, Zhonghe & Li, Jing & Badiei, Ali & Akhlaghi, Yousef Golizadeh & Liu, Zhijian, 2021. "Scientific and technological progress and future perspectives of the solar assisted heat pump (SAHP) system," Energy, Elsevier, vol. 229(C).
    12. Meng Liu & Shenghua Du & Qing Ai & Jiaming Gong & Yong Shuai, 2022. "Spectral Radiation Characteristic Measurements of Absorption and Scattering Semitransparent Materials—A Review," Energies, MDPI, vol. 15(23), pages 1-28, November.
    13. Anirudh, K. & Dhinakaran, S., 2021. "Numerical analysis of the performance improvement of a flat-plate solar collector using conjugated porous blocks," Renewable Energy, Elsevier, vol. 172(C), pages 382-391.
    14. Tabish Alam & Nagesh Babu Balam & Kishor Sitaram Kulkarni & Md Irfanul Haque Siddiqui & Nishant Raj Kapoor & Chandan Swaroop Meena & Ashok Kumar & Raffaello Cozzolino, 2021. "Performance Augmentation of the Flat Plate Solar Thermal Collector: A Review," Energies, MDPI, vol. 14(19), pages 1-23, September.
    15. Xinwei Lin & Yongfang Xia & Zude Cheng & Xianshuang Liu & Yingmei Fu & Lingyun Li & Wenqin Zhou, 2024. "Thermal Performance Analysis of Porous Foam-Assisted Flat-Plate Solar Collectors with Nanofluids," Sustainability, MDPI, vol. 16(2), pages 1-26, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:145:y:2020:i:c:p:428-441. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.