Towards the development of biofuel production from paper mill effluent

Biohydrogen and biomethane production via two stage sequencing system from paper mill effluent (PME) was evaluated to enhance its COD reduction. Heat-shock pretreatment of anaerobic sludge at 90 °C for 15 min was chosen to obtain a mixed microbial inoculum for dark fermentative hydrogen production. The effect of initial pH (5, 6 and 7) on the efficiency of hydrogen fermentation at different concentrations of substrate (3, 5 and 7 g-COD/L) was investigated, which the maximum hydrogen yield was obtained at initial pH 5. After that, the effects of substrate concentration (3, 5, 7, 10 and 15 g-COD/L) and fermentation temperature (37 and 55 °C) were investigated on the hydrogen production yield. The efficiency of dark hydrogen fermentation for all substrate concentrations was higher at 55 °C. The hydrogen production was enhanced as substrate concentration increased up to 5 g-COD/L, but then it was reduced, and the optimum hydrogen yield of 38.8 mL H2/g-CODinitial was obtained at substrate concentration of 5 g-COD/L at 55 °C. The highest hydrogen (35.1 mL H2/g-CODinitial) was obtained at 5 g-COD/L and 55 °C and the highest methane (553.8 mL CH4/g-CODinitial) was obtained at 3 g-COD/L and 37 °C. Maximum COD reduction of 88.1% was obtained in two-stage sequencing dark fermentation/anaerobic digestion system at 3 g-COD/L and 37 °C.