IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v119y2018icp210-216.html
   My bibliography  Save this article

Micro gas turbine running on naturally aspirated syngas: An experimental investigation

Author

Listed:
  • Al-attab, K.A.
  • Zainal, Z.A.

Abstract

Syngas produced from fixed bed gasifier suffers from high inert diluents (N2+ CO2) in the range of 60–65 vol.%. Hence, higher energy is required for syngas external compression making this concept less profitable for small scale micro gas turbine (MGT) applications. A new method was proposed in this study to eliminate the external compression of syngas by inducing air−syngas mixture directly through the MGT's compressor. Turbocharger based MGT with pressurized cyclone combustor (PCC) were developed to evaluate the new concept experimentally. Annular tube heat recovery unit (HRU) was developed to utilize the exhaust thermal power for hot air production. Stable syngas combustion was achieved with air-fuel ratio in the range of 3.3–4.1. NOx and CO emissions were below 250 ppm and 15 ppm respectively, with turbine inlet temperature below 700 °C. The natural aspiration of syngas directly from the gasifier was sufficient to run the MGT at low pressure ratio of 0.4 barg, but it was not enough to generate any electrical output. Hot air thermal output was 34 kW with overall system efficiency including the gasifier of 37.8%.

Suggested Citation

  • Al-attab, K.A. & Zainal, Z.A., 2018. "Micro gas turbine running on naturally aspirated syngas: An experimental investigation," Renewable Energy, Elsevier, vol. 119(C), pages 210-216.
    • Handle: RePEc:eee:renene:v:119:y:2018:i:c:p:210-216
    DOI: 10.1016/j.renene.2017.12.008
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148117312041
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2017.12.008?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhou, Chunguang & Rosén, Christer & Engvall, Klas, 2016. "Biomass oxygen/steam gasification in a pressurized bubbling fluidized bed: Agglomeration behavior," Applied Energy, Elsevier, vol. 172(C), pages 230-250.
    2. de Jong, W. & Ünal, Ö. & Andries, J. & Hein, K. R. G. & Spliethoff, H., 2003. "Thermochemical conversion of brown coal and biomass in a pressurised fluidised bed gasifier with hot gas filtration using ceramic channel filters: measurements and gasifier modelling," Applied Energy, Elsevier, vol. 74(3-4), pages 425-437, March.
    3. Nikpey, H. & Assadi, M. & Breuhaus, P. & Mørkved, P.T., 2014. "Experimental evaluation and ANN modeling of a recuperative micro gas turbine burning mixtures of natural gas and biogas," Applied Energy, Elsevier, vol. 117(C), pages 30-41.
    4. Al-attab, K.A. & Zainal, Z.A., 2011. "Design and performance of a pressurized cyclone combustor (PCC) for high and low heating value gas combustion," Applied Energy, Elsevier, vol. 88(4), pages 1084-1095, April.
    5. Zornek, T. & Monz, T. & Aigner, M., 2015. "Performance analysis of the micro gas turbine Turbec T100 with a new FLOX-combustion system for low calorific fuels," Applied Energy, Elsevier, vol. 159(C), pages 276-284.
    6. Athari, Hassan & Soltani, Saeed & Rosen, Marc A. & Seyed Mahmoudi, Seyed Mohammad & Morosuk, Tatiana, 2016. "Gas turbine steam injection and combined power cycles using fog inlet cooling and biomass fuel: A thermodynamic assessment," Renewable Energy, Elsevier, vol. 92(C), pages 95-103.
    7. Athari, Hassan & Soltani, Saeed & Rosen, Marc A. & Gavifekr, Masood Kordoghli & Morosuk, Tatiana, 2016. "Exergoeconomic study of gas turbine steam injection and combined power cycles using fog inlet cooling and biomass fuel," Renewable Energy, Elsevier, vol. 96(PA), pages 715-726.
    8. de Jong, Wiebren & Andries, Jans & Hein, Klaus R.G., 1999. "Coal/biomass co-gasification in a pressurised fluidised bed reactor," Renewable Energy, Elsevier, vol. 16(1), pages 1110-1113.
    9. Valera-Medina, Agustin & Marsh, Richard & Runyon, Jon & Pugh, Daniel & Beasley, Paul & Hughes, Timothy & Bowen, Phil, 2017. "Ammonia–methane combustion in tangential swirl burners for gas turbine power generation," Applied Energy, Elsevier, vol. 185(P2), pages 1362-1371.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Stolecka, Katarzyna & Rusin, Andrzej, 2020. "Analysis of hazards related to syngas production and transport," Renewable Energy, Elsevier, vol. 146(C), pages 2535-2555.
    2. Hamid, M. Fadzli & Idroas, M. Yusof & Mazlan, M. & Sa'ad, S. & Teoh, Y.H. & Che Mat, S. & Miskam, M.A. & Abdullah, M.K., 2022. "Methods for improving the in-cylinder airflow characteristics for sustainable transportation using fuels with higher viscosity: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    3. Nassef, Ahmed M. & Sayed, Enas T. & Rezk, Hegazy & Inayat, Abrar & Yousef, Bashria A.A. & Abdelkareem, Mohammad A. & Olabi, A.G., 2020. "Developing a fuzzy-model with particle swarm optimization-based for improving the conversion and gasification rate of palm kernel shell," Renewable Energy, Elsevier, vol. 166(C), pages 125-135.
    4. Guan, Jin & Lv, Xiaojing & Spataru, Catalina & Weng, Yiwu, 2021. "Experimental and numerical study on self-sustaining performance of a 30-kW micro gas turbine generator system during startup process," Energy, Elsevier, vol. 236(C).
    5. Chen, Wen-Lih & Currao, Gaetano & Li, Yueh-Heng & Kao, Chien-Chun, 2023. "Employing Taguchi method to optimize the performance of a microscale combined heat and power system with Stirling engine and thermophotovoltaic array," Energy, Elsevier, vol. 270(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Al-attab, K.A. & Zainal, Z.A., 2015. "Externally fired gas turbine technology: A review," Applied Energy, Elsevier, vol. 138(C), pages 474-487.
    2. Anvari, Simin & Szlęk, Andrzej & Arteconi, Alessia & Desideri, Umberto & Rosen, Marc A., 2023. "Comparative study of steam injection modes for a proposed biomass-driven cogeneration cycle: Performance improvement and CO2 emission reduction," Applied Energy, Elsevier, vol. 329(C).
    3. Nadir, Mahmoud & Ghenaiet, Adel, 2017. "Steam turbine injection generator performance estimation considering turbine blade cooling," Energy, Elsevier, vol. 132(C), pages 248-256.
    4. Ma, Hongting & Du, Na & Zhang, Zeyu & Lyu, Fan & Deng, Na & Li, Cong & Yu, Shaojie, 2017. "Assessment of the optimum operation conditions on a heat pipe heat exchanger for waste heat recovery in steel industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 50-60.
    5. Nami, Hossein & Anvari-Moghaddam, Amjad, 2020. "Geothermal driven micro-CCHP for domestic application – Exergy, economic and sustainability analysis," Energy, Elsevier, vol. 207(C).
    6. Kayadelen, Hasan Kayhan, 2018. "A multi-featured model for estimation of thermodynamic properties, adiabatic flame temperature and equilibrium combustion products of fuels, fuel blends, surrogates and fuel additives," Energy, Elsevier, vol. 143(C), pages 241-256.
    7. Sadeghi, Mohsen & Chitsaz, Ata & Marivani, Parisa & Yari, Mortaza & Mahmoudi, S.M.S., 2020. "Effects of thermophysical and thermochemical recuperation on the performance of combined gas turbine and organic rankine cycle power generation system: Thermoeconomic comparison and multi-objective op," Energy, Elsevier, vol. 210(C).
    8. Dmytro Levchenko & Andrii Manzharov & Artem Artyukhov & Nadiya Artyukhova & Jan Krmela, 2021. "Comparative Exergy Analysis of Units for the Porous Ammonium Nitrate Granulation," Energies, MDPI, vol. 14(2), pages 1-16, January.
    9. Nelson, James & Johnson, Nathan G. & Doron, Pinchas & Stechel, Ellen B., 2018. "Thermodynamic modeling of solarized microturbine for combined heat and power applications," Applied Energy, Elsevier, vol. 212(C), pages 592-606.
    10. Al-Rashed, Abdullah A.A.A. & Afrand, Masoud, 2021. "Multi-criteria exergoeconomic optimization for a combined gas turbine-supercritical CO2 plant with compressor intake cooling fueled by biogas from anaerobic digestion," Energy, Elsevier, vol. 223(C).
    11. Ibrahim, Thamir K. & Mohammed, Mohammed Kamil & Awad, Omar I. & Abdalla, Ahmed N. & Basrawi, Firdaus & Mohammed, Marwah N. & Najafi, G. & Mamat, Rizalman, 2018. "A comprehensive review on the exergy analysis of combined cycle power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 835-850.
    12. Barakat, Elsayed & Jin, Tai & Wang, Gaofeng, 2023. "Performance analysis of selective exhaust gas recirculation integrated with fogging cooling system for gas turbine power plants," Energy, Elsevier, vol. 263(PC).
    13. Kayadelen, Hasan Kayhan & Ust, Yasin, 2017. "Thermodynamic, environmental and economic performance optimization of simple, regenerative, STIG and RSTIG gas turbine cycles," Energy, Elsevier, vol. 121(C), pages 751-771.
    14. AlNouss, Ahmed & McKay, Gordon & Al-Ansari, Tareq, 2020. "Enhancing waste to hydrogen production through biomass feedstock blending: A techno-economic-environmental evaluation," Applied Energy, Elsevier, vol. 266(C).
    15. Xu, Shisen & Ren, Yongqiang & Wang, Baomin & Xu, Yue & Chen, Liang & Wang, Xiaolong & Xiao, Tiancun, 2014. "Development of a novel 2-stage entrained flow coal dry powder gasifier," Applied Energy, Elsevier, vol. 113(C), pages 318-323.
    16. Zhang, Ziyin & Pang, Shusheng & Levi, Tana, 2017. "Influence of AAEM species in coal and biomass on steam co-gasification of chars of blended coal and biomass," Renewable Energy, Elsevier, vol. 101(C), pages 356-363.
    17. Wu, Fang-Hsien & Chen, Guan-Bang, 2020. "Numerical study of hydrogen peroxide enhancement of ammonia premixed flames," Energy, Elsevier, vol. 209(C).
    18. Neves, Daniel & Thunman, Henrik & Tarelho, Luís & Larsson, Anton & Seemann, Martin & Matos, Arlindo, 2014. "Method for online measurement of the CHON composition of raw gas from biomass gasifier," Applied Energy, Elsevier, vol. 113(C), pages 932-945.
    19. Rossi, Francesco & Velázquez, David, 2015. "A methodology for energy savings verification in industry with application for a CHP (combined heat and power) plant," Energy, Elsevier, vol. 89(C), pages 528-544.
    20. Xiao, Hua & Valera-Medina, Agustin & Bowen, Philip J, 2017. "Study on premixed combustion characteristics of co-firing ammonia/methane fuels," Energy, Elsevier, vol. 140(P1), pages 125-135.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:119:y:2018:i:c:p:210-216. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.