IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v112y2017icp44-52.html
   My bibliography  Save this article

Experimental validation of mathematical models of identical aluminum and stainless steel engineered conical solar collectors

Author

Listed:
  • Imtiaz Hussain, M.
  • Lee, Gwi Hyun
  • Kim, Jun-Tae

Abstract

This paper studies the mathematical modeling of a conical solar collector (CSC) based on different reflector materials and view angles. The optical performance testing using both stainless steel reflector (SSR) and aluminum mirror reflector (AMR) was performed under similar conditions at reflector view angles of 35°, 40°, and 45°, respectively. Main operational parameters related to the thermal/optical efficiencies of the SSR and AMR systems were determined and compared with each other. In addition, the interdependent transient temperature responses of both system components were predicted using Matlab® ordinary differential equation (ODE) solvers. For the purpose of model validation, simulation results from both systems were compared with experimental data. Results showed that the highest efficiencies and maximum water temperatures were achieved at reflector view angle of 45°, but these values were significantly higher in AMR system than SSR system for all of the aforementioned cases.

Suggested Citation

  • Imtiaz Hussain, M. & Lee, Gwi Hyun & Kim, Jun-Tae, 2017. "Experimental validation of mathematical models of identical aluminum and stainless steel engineered conical solar collectors," Renewable Energy, Elsevier, vol. 112(C), pages 44-52.
    • Handle: RePEc:eee:renene:v:112:y:2017:i:c:p:44-52
    DOI: 10.1016/j.renene.2017.05.035
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148117304202
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2017.05.035?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Imtiaz Hussain, M. & Lee, Gwi Hyun, 2017. "Numerical and experimental heat transfer analyses of a novel concentric tube absorber under non-uniform solar flux condition," Renewable Energy, Elsevier, vol. 103(C), pages 49-57.
    2. Kessentini, Hamdi & Bouden, Chiheb, 2013. "Numerical and experimental study of an integrated solar collector with CPC reflectors," Renewable Energy, Elsevier, vol. 57(C), pages 577-586.
    3. Tyagi, V.V. & Kaushik, S.C. & Tyagi, S.K., 2012. "Advancement in solar photovoltaic/thermal (PV/T) hybrid collector technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(3), pages 1383-1398.
    4. Milani, Dia & Abbas, Ali, 2016. "Multiscale modeling and performance analysis of evacuated tube collectors for solar water heaters using diffuse flat reflector," Renewable Energy, Elsevier, vol. 86(C), pages 360-374.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Haedr Abdalha Mahmood Alsalame & Muhammad Imtiaz Hussain & Waseem Amjad & Asma Ali & Gwi Hyun Lee, 2022. "Thermo-Economic Performance Evaluation of a Conical Solar Concentrating System Using Coil-Based Absorber," Energies, MDPI, vol. 15(9), pages 1-12, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Amri, Amun & Jiang, Zhong Tao & Pryor, Trevor & Yin, Chun-Yang & Djordjevic, Sinisa, 2014. "Developments in the synthesis of flat plate solar selective absorber materials via sol–gel methods: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 36(C), pages 316-328.
    2. Shao, Nina & Ma, Liangdong & Zhang, Jili, 2020. "Experimental investigation on the performance of direct-expansion roof-PV/T heat pump system," Energy, Elsevier, vol. 195(C).
    3. Ulloa, Carlos & Nuñez, José M. & Lin, Chengxian & Rey, Guillermo, 2018. "AHP-based design method of a lightweight, portable and flexible air-based PV-T module for UAV shelter hangars," Renewable Energy, Elsevier, vol. 123(C), pages 767-780.
    4. Alva, Guruprasad & Lin, Yaxue & Fang, Guiyin, 2018. "An overview of thermal energy storage systems," Energy, Elsevier, vol. 144(C), pages 341-378.
    5. Yu, Y. & Yang, H. & Peng, J. & Long, E., 2019. "Performance comparisons of two flat-plate photovoltaic thermal collectors with different channel configurations," Energy, Elsevier, vol. 175(C), pages 300-308.
    6. Hossain, Farzad & Karim, Md. Rezwanul & Bhuiyan, Arafat A., 2022. "A review on recent advancements of the usage of nano fluid in hybrid photovoltaic/thermal (PV/T) solar systems," Renewable Energy, Elsevier, vol. 188(C), pages 114-131.
    7. Julian Schumann & Bert Schiebler & Federico Giovannetti, 2021. "Performance Evaluation of an Evacuated Tube Collector with a Low-Cost Diffuse Reflector," Energies, MDPI, vol. 14(24), pages 1-16, December.
    8. M. Imtiaz Hussain & Jun-Tae Kim, 2020. "Performance Evaluation of Photovoltaic/Thermal (PV/T) System Using Different Design Configurations," Sustainability, MDPI, vol. 12(22), pages 1-17, November.
    9. Rounis, Efstratios Dimitrios & Athienitis, Andreas & Stathopoulos, Theodore, 2021. "Review of air-based PV/T and BIPV/T systems - Performance and modelling," Renewable Energy, Elsevier, vol. 163(C), pages 1729-1753.
    10. Good, Clara, 2016. "Environmental impact assessments of hybrid photovoltaic–thermal (PV/T) systems – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 234-239.
    11. Devanarayanan, K. & Kalidasa Murugavel, K., 2014. "Integrated collector storage solar water heater with compound parabolic concentrator – development and progress," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 51-64.
    12. Islam, Md. Parvez & Morimoto, Tetsuo, 2018. "Advances in low to medium temperature non-concentrating solar thermal technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2066-2093.
    13. Pan, Hong-Yu & Chen, Xue & Xia, Xin-Lin, 2022. "A review on the evolvement of optical-frequency filtering in photonic devices in 2016–2021," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    14. Pang, Wei & Cui, Yanan & Zhang, Qian & Wilson, Gregory.J. & Yan, Hui, 2020. "A comparative analysis on performances of flat plate photovoltaic/thermal collectors in view of operating media, structural designs, and climate conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    15. Lamnatou, Chr. & Chemisana, D., 2017. "Photovoltaic/thermal (PVT) systems: A review with emphasis on environmental issues," Renewable Energy, Elsevier, vol. 105(C), pages 270-287.
    16. Tyagi, V.V. & Rahim, Nurul A.A. & Rahim, N.A. & Selvaraj, Jeyraj A./L., 2013. "Progress in solar PV technology: Research and achievement," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 443-461.
    17. Islam, Md Tasbirul & Huda, Nazmul & Saidur, R., 2019. "Current energy mix and techno-economic analysis of concentrating solar power (CSP) technologies in Malaysia," Renewable Energy, Elsevier, vol. 140(C), pages 789-806.
    18. Zhang, Xingxing & Shen, Jingchun & Lu, Yan & He, Wei & Xu, Peng & Zhao, Xudong & Qiu, Zhongzhu & Zhu, Zishang & Zhou, Jinzhi & Dong, Xiaoqiang, 2015. "Active Solar Thermal Facades (ASTFs): From concept, application to research questions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 32-63.
    19. Makki, Adham & Omer, Siddig & Sabir, Hisham, 2015. "Advancements in hybrid photovoltaic systems for enhanced solar cells performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 658-684.
    20. Calise, Francesco & Macaluso, Adriano & Piacentino, Antonio & Vanoli, Laura, 2017. "A novel hybrid polygeneration system supplying energy and desalinated water by renewable sources in Pantelleria Island," Energy, Elsevier, vol. 137(C), pages 1086-1106.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:112:y:2017:i:c:p:44-52. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.